User Manual

299
SQW0021
Others
Message displays
The following explains the meaning of major messages displayed on the monitor or
viewfinder, and how to respond to them.
■
Memory cards
[Memory Card Error] [Format this card?]
• The card format cannot be used with this camera.
→ Save needed data on a computer or other device, and then use [Format] on the camera. (→26)
[Insert SD card again] [Try another card]
• Access to card has failed.
→ Insert card again.
• Try with a different card.
[Read Error] / [Write Error] [Please check the card]
• Data read has failed.
→ Check whether card has been inserted correctly (→24)
• Data write has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
• Card may possibly be damaged.
→ Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
• The speed class of a required card varies depending on [Rec Format] and [Rec Quality] of a motion
picture. Be sure to use a card of the recommended speed class. For details, refer to “About the
motion picture recording and speed class” (→25).
→ If recording stops even when using a card of the recommended speed class (→25), the data
writing speed has dropped. If this happens, we recommend backing up the data on the memory
card and formatting it (→26).
[Memory Card Error] [This memory card cannot be used]
• Not compatible with the camera. Use a compatible card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
• Format the card after saving necessary data on a PC etc. (→26)
→ Insert a different card.