User Manual

102
SQW0740
Focus, Brightness (Exposure) and Colour tone Settings
Taking pictures by locking the focus and/or exposure
(AF/AE Lock)
Recording mode:
The AF/AE Lock function is convenient, for example, when there is too much contrast with
the subject and you cannot get appropriate exposure (AE Lock) or when you want to take
a still picture composed with the subject outside the AF area (AF Lock).
Preparation
To execute the AF/AE Lock function, it is necessary to register [AF/AE LOCK] to the function button.
(→46)
1
Point the camera at the subject
2
Lock the focus and/or exposure while you press and hold the
function button
• When you release the function button, the focus and/or exposure lock is
cancelled.
3
While you press and hold the function button, move the
camera to compose the picture you want to take and fully
press the shutter button
■
Setting the function of the function button where [AF/AE LOCK] is registered
→ [Custom] → [AF/AE Lock]
[AE LOCK]
Locks exposure only.
• [AEL] is displayed when the correct exposure is achieved.
[AF LOCK]
Locks focus only.
• [AFL] is displayed when the subject comes into focus.
[AF/AE LOCK]
Locks focus and exposure.
• [AFL] and [AEL] are displayed when the subject is in focus and the correct
exposure is achieved.
[AF-ON] Auto Focus is activated.
●
AF Lock only is effective in the following case:
• Manual Exposure Mode
●
During Manual Focus, only AE Lock can be used.
●
The subject can be focused again by pressing the shutter button halfway, even when AE is locked.
●
Programme Shift can be set even when AE is locked.