User Manual

280
SQW0740
Connecting with other devices
Printing
Printing multiple pictures
Multiple pictures are printed at one time.
1
Press to select [Multi Print] in step
3
of “Printing” (→279)
2
Use to select the item and press [MENU/SET]
[Multi Select]
Scroll between pictures with , select pictures to print with
[MENU/SET] (Press [MENU/SET] again to release selection.)
Use to select [OK], and press [MENU/SET]
[Select All] Print all pictures.
[Print Set (DPOF)] Print pictures selected in [Print Set]. (→224)
[Favorite] Print pictures selected as [Favorite]. (→223)
3
Use to select [Print start] and press [MENU/SET]
(Print settings (→281))
●
The group pictures are displayed one by one instead of all pictures at the same time.
●
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).
When the battery begins to run out during communication, a warning beep sounds. Cancel printing
and disconnect USB connection cable (supplied).
●
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable.
●
Some printers can print directly from the camera’s memory card. For details, see the manual for
your printer.
●
An orange “●” displayed during printing indicates an error message.
●
Print may be divided into several pictures if printing a large amount of pictures. (Remaining sheets
display may differ from the number of pictures set for printing.)
●
Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be printed.
●
Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file
format at the same time as the RAW file can be printed.)