Operating Instructions for advanced features Digital Camera Model No. DMC-SZ10 Please read these instructions carefully before using this product, and save this manual for future use.
Contents Before Use Care of the camera ...................................................................................................... 6 Standard Accessories................................................................................................. 7 Names and Functions of Main Parts.......................................................................... 8 Preparation Charging the Battery..................................................................................................
• Digital Zoom........................................................................................................ 54 Taking Pictures Using the Built-in Flash................................................................. 55 • Switching to the appropriate flash setting ........................................................... 55 Taking Pictures with the Self-timer.......................................................................... 59 Compensating the Exposure...................................
• [Red-Eye Removal]............................................................................................. 84 • [Stabilizer] ........................................................................................................... 84 • [Date Stamp] ....................................................................................................... 85 • [Self Shot] ...........................................................................................................
Connecting to other equipment Playing Back Pictures on a TV Screen.................................................................. 130 Saving still pictures and motion pictures on your PC......................................... 132 • Transferring images to a PC............................................................................. 133 Printing the Pictures ...............................................................................................
Before Use Care of the camera Do not subject to strong vibration, shock, or pressure. • The lens, monitor, or external case may be damaged if used in the following conditions. It may also malfunction or image may not be recorded if you: – Drop or hit the camera. – Sit down with the camera in your trousers pocket or forcefully insert it into a full or tight bag, etc. – Attach any items such as accessories to the strap attached to the camera. – Press hard on the lens or the monitor.
Before Use Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Operating Instructions”. • Battery Pack is indicated as battery pack or battery in the text. • SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text. • The card is optional.
Before Use Names and Functions of Main Parts 1 2 3 4 Flash (P55) Lens (P6, 157) Self-timer indicator (P59) AF Assist Lamp (P83) Microphone • Be careful not to cover the microphone with your 1 2 3 finger. 5 Lens barrier 4 5 6 7 8 9 Monitor (P52, 140, 157) • Peel off the protective film before use. [MODE] button (P25, 87) Charging lamp (P13) Wi-Fi® connection lamp (P100) Speaker • Be careful not to cover the speaker with your 6 7 8 9 10 finger. Doing so may make sound difficult to hear.
Before Use 15 Lens barrel 16 [AV OUT/DIGITAL] socket (P13, 130, 133, 135) • This socket is also used when charging the 15 16 17 battery. 17 Strap eyelet (P24) • To prevent dropping, be sure to attach the supplied strap and fit it to your wrist. 18 19 20 21 Zoom lever (P53) Camera [ON/OFF] button (P22) Shutter button (P26, 30) Motion picture button (P33) 18 19 20 22 Tripod mount • It may not be possible to attach and securely fasten a tripod with a screw length of 5.5 mm (0.
Before Use Monitor You can adjust the angle of the monitor. 1 When closing 2 1 Flip up the bottom of the monitor lightly to open. 2 Adjust the angle of the monitor. • Be careful not to catch your finger, etc. in the monitor. • When rotating the monitor, be careful not to apply too much force or drop the camera. This may cause scratches and malfunctions. • When not using this unit, close the monitor completely back to the original position.
Preparation Charging the Battery Use the dedicated AC adaptor (supplied), USB connection cable (supplied) and battery. • The battery is not charged when the camera is shipped. Charge the battery before use. • Charge the battery only when it is inserted in the camera.
Preparation Inserting the Battery 1 Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Being careful about the battery orientation, securely insert it all the way in, and then check that it is locked by the lever A. To remove the battery, move the lever A in the direction of the arrow. 3 1: Close the card/battery door.
Preparation Charging • Charge the battery in areas with an ambient temperature, between 10 oC and 30 oC (50 oF and 86 oF) (same as the battery temperature), is recommended. Insert the battery into this unit. Check that this unit is turned off. To power outlet F USB connection cable (supplied) AC adaptor (supplied) • Check the directions of the connectors, and PC (Turned on) plug them straight in or unplug them straight Insert the USB connection cable so that its [ ] out.
Preparation ∫ About the charging lamp Lit red: Off: Charging. Charging has completed. (When charging is complete, disconnect the camera from the power outlet or computer.) Blinking red: Charging error. (Refer to P145 for details.) ∫ Charging time When using the AC adaptor (supplied) Charging time Approx. 170 min • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.
Preparation • Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated. • Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional). • Do not use any other AC adaptors except the supplied one. • Do not use a USB extension cable.
Preparation Approximate operating time and number of recordable pictures ∫ Recording still pictures Number of recordable pictures Approx. 200 pictures Recording time Approx. 100 min By CIPA standard in Normal Picture Mode Recording conditions by CIPA standard • CIPA is an abbreviation of [Camera & Imaging Products Association]. • Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when monitor is on. • Using a Panasonic SD Memory Card. • Using the supplied battery.
Preparation ∫ Playback Playback time Approx. 170 min • The operating times and number of recordable pictures will differ according to the environment and the operating conditions. For example, in the following cases, the operating times will shorten and the number of recordable pictures is reduced: – In low-temperature environments, such as on ski slopes. – When using [Monitor Luminance]. – When operations such as flash and zoom are used repeatedly.
Preparation Inserting and Removing the Card (optional) • Check that this unit is turned off. • We recommend using a Panasonic card. 1 2 Slide the release lever in the direction of the arrow and open the card/battery door. Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it. To remove the card, push the card until it clicks, then pull the card out upright. A: Do not touch the connection terminals of the card.
Preparation About the Built-in Memory/the Card The following operations can be performed using this unit: When a card has not been inserted Pictures can be recorded on the built-in memory and played back. When a card has been inserted Pictures can be recorded on the card and played back.
Preparation • During access (image writing, reading and deleting, formatting etc.), do not turn this unit off, remove the battery, card or disconnect the AC adaptor (supplied). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again.
Preparation Approximate number of recordable pictures and available recording time ∫ About the display of the number of recordable pictures and available recording time • Switch the display (number of recordable pictures, Number of Available recording available recording time, etc.) by pressing 4. (P52) recordable pictures time • The number of recordable pictures and the available R1m10s recording time are an approximation. 5 (These vary depending on the recording conditions and the type of card.
Preparation Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Press camera [ON/OFF] button. • If the language select screen is not displayed, proceed to step 4. 2 3 4 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. Press [MENU/SET]. Please set the clock Clock Set 5 Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set.
Preparation Changing the Clock Setting Select [Clock Set] on the [Setup] menu and then press [MENU/SET]. (P38) • The clock can be reset as shown in steps 5 and 6. • The clock setting is maintained for about 7 days using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 2 hours to charge the built-in battery.
Preparation Tips for taking good pictures Fit the strap and hold the camera carefully Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Do not swing around or pull forcefully on the unit with the strap attached. The strap may break. • Be careful not to move the camera when you press the shutter button. • Be careful not to put your fingers on the flash, AF assist lamp, microphone, speaker or lens etc.
Basic Selecting the Recording Mode 1 2 Press [MODE]. Press 3/4/2/1 to select the Recording Mode. Rec Mode Normal Picture Cancel 3 Select Set Press [MENU/SET]. ∫ List of Recording Modes ¦ Intelligent Auto Mode (P26) The subjects are recorded using settings automatically selected by the camera. ! Normal Picture Mode (P30) The subjects are recorded using your own settings. Creative Control Mode (P61) Record while checking the image effect.
Basic Taking pictures using the automatic function (Intelligent Auto Mode) Recording Mode: The camera will set the most appropriate settings to match the subject and the recording conditions so we recommend this mode for beginners or those who want to leave the settings to the camera and take pictures easily. • The following functions are activated automatically. – Scene Detection – Backlight Compensation – Intelligent ISO sensitivity control – Auto White Balance – Face Detection – [i.Exposure] – [i.
Basic 3 Press the shutter button halfway to focus. A • The focus indication A (green) lights when the subject is focused. • The AF area B is displayed around the subject’s face by the Face Detection function. In other cases, it is displayed at the point on the subject which is in focus. • The minimal distance (how close you can be to the subject) will change depending on the zoom factor. Please check with the recordable range display on the screen.
Basic Scene Detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its colour changes to the usual red. When taking pictures [i-Portrait] [i-Scenery] [i-Macro] [i-Night Portrait]¢ [i-Night Scenery] [i-Sunset] ¢ Only displayed when the flash is set to [ ]. • [¦] is set if none of the scenes are applicable, and the standard settings are set.
Basic Changing the settings Following menus can be set. Menu Item ¢ ¢ [Rec] [Picture Size] /[Burst Shooting] /[Self Shot] [Motion Picture] [Rec Quality] [Setup] [Online Manual]/[Clock Set]/[World Time]/[Airplane Mode]/[Beep]/ [Language] • Menu items other than those listed above are not displayed, but you can set them in other Recording Modes. [Wi-Fi] [New Connection]/[History Connection]/[Favorite Connection]/ [Wi-Fi Setup] • For the setting method of the menu, refer to P38.
Basic Taking pictures with your favourite settings (Normal Picture Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 2 Press [MODE]. Press 3/4/2/1 to select [Normal Picture], and then press [MENU/SET]. 3 Aim the AF area at the point you want to focus on. 4 Press the shutter button halfway to focus.
Basic Focusing A Aim the AF area at the subject, and then press the shutter button halfway. 100 1/60 F3.1 B Focus When the subject is focused When the subject is not focused Focus indication A On Blinks AF area B White>Green White>Red Sound Beeps 2 times Beeps 4 times • The AF area may be displayed larger for certain zoom magnifications and in dark places. ∫ About focus range The focus range is displayed when operating the zoom.
Basic ∫ When the subject is not in focus (such as when it is not in the centre of the composition of the picture you want to take) 1 Aim the AF area at the subject, and press the shutter button half way to fix the focus and exposure. 2 Press and hold the shutter button half way while moving the camera as you compose the picture. • You can repeatedly retry the actions in step 1 before pressing the shutter button fully.
Basic Recording Motion Pictures Applicable modes: This unit can record motion pictures in QuickTime Motion JPEG format. 1 Start recording by pressing the motion picture button. A Available recording time B Elapsed recording time • You can record motion pictures fitting each Recording Mode. • Release the motion picture button right after you press it. • The recording state indicator (red) C will flash while recording motion pictures. • For the setting of [Rec Quality], refer to P86.
Basic • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction. • The screen may be blacked out momentarily, or the unit may record noise due to static electricity or electromagnetic waves etc. depending on the environment of the motion picture recording. • Even if the aspect ratio setting is the same in still pictures and motion pictures, the angle of view may change at the start of the motion picture recording.
Basic Playing Back 1 Press [(]. 2 Press 2/1 to select pictures. A A File number B Picture number • If you press and hold 2/1, you can play back the pictures in succession. • Speed of picture Forwarding/Rewinding changes depending on the playback status. ∫ Playing Back Motion Pictures Press 2/1 to select a picture with a Motion Picture icon (such as [ ]), and then press 3 to play back.
Basic • This camera complies with the DCF standard “Design rule for Camera File system” established by JEITA “Japan Electronics and Information Technology Industries Association” and with Exif “Exchangeable Image File Format”. Files that do not comply with the DCF standard cannot be played back. • Images recorded or edited with the camera may not be played back correctly on other devices and applied effects may not appear on the devices.
Basic Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures on the built-in memory or the card that are being played back will be deleted. • Pictures that are not in the DCF standard or those that are protected cannot be deleted. To delete a single picture Select the picture to be deleted, and then press [ ]. • Confirmation screen is displayed. Q.MENU Picture is deleted by selecting [Yes]. To delete multiple pictures (up to 50) or all the pictures 1 2 Press [ ].
Basic Setting the Menu The camera comes with menus that allow you to choose the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [Setup] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera.
Basic 3 Press 3/4 to select the menu item and then press [MENU/SET]. A Menu screen page • It will switch to the next page when you reach the bottom. (It will also switch by rotating the zoom lever) 4 Press 3/4 to select the setting and then press [MENU/SET].
Basic Using the Quick Menu By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. 1 Press [Q.MENU] when recording. Q.MENU 2 Press 3/4/2/1 to select the menu item and the setting and then press [MENU/SET] to close the menu.
Basic About the Setup Menu For details on how to select the [Setup] menu settings, refer to P38. • [Clock Set], [Economy] and [Auto Review] are important items. Check their settings before using them. • In Intelligent Auto Mode, only [Online Manual], [Clock Set], [World Time], [Airplane Mode], [Beep], [Language] can be set. [Online Manual] U [Clock Set] [URL display]/[USB connection]/[QR Code display] Setting Date/Time. • Refer to P22 for details.
Basic Restricts Wi-Fi settings. [ON]: Wi-Fi functions cannot be used. [Airplane Mode] [OFF] • When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to [ON], and turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with gauges. r [Beep] This allows you to set the beep and shutter sound. [t] ([Low])/[u] ([High])/[s] ([Off]) Brightness, colour, or red or blue tint of the monitor is adjusted. [Brightness]: Adjust the brightness.
Basic These menu settings make it easier to see the monitor when you are in bright places or when you are holding the camera high above your head. [Monitor Luminance] [„] ([Auto Power Monitor])¢: The brightness is adjusted automatically depending on how bright it is around the camera. […] ([Power Monitor]): The monitor becomes brighter and easier to see even when taking pictures outdoors. [Å] ([High Angle])¢: The monitor is easier to see when taking pictures with the camera held high above your head.
Basic The camera is automatically turned off if the camera has not been used for the time selected on the setting. Also, the battery life is conserved by dimming the monitor. q [Economy] p [Auto Power Off]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [2MIN.]/[5MIN.]/[10MIN.]/[OFF] ECO [Monitor Power Save]: The brightness of the monitor is lowered. [ON]/[OFF] • [Auto Power Off] is fixed to [5MIN.] in the following case.
Basic w [Reset] The recording or setup settings are reset to the default. • When the setup settings are reset, the following settings are also reset. – The birthday settings for [Baby1]/[Baby2] and [Pet] in Scene Mode. • The folder number and the clock setting are not changed. [Reset Wi-Fi Settings] Reset all settings in the [Wi-Fi] menu to factory default settings. • Always reset the camera when disposing or selling it to prevent personal information saved within the camera from being misused.
Recording Taking Pictures of Yourself ([Self Shot]) Applicable modes: If you rotate the monitor, Self Shot Mode is activated. You can easily take pictures of yourself while looking at the screen. • When [Self Shot] (P85) in [Rec] menu is set to [OFF], even if you rotate the monitor, the camera will not be set to Self Shot Mode. (It is set to [ON] at the time of purchase.) In Self Shot Mode... • Deciding on a composition is easier because recording is performed while looking at the screen.
Recording 2 Press [MENU/SET] to set the soft skin effect, the number of pictures to be taken, and other details. (P48) M 1pic. • Operate the buttons on the back of the unit while looking at the screen. Be careful not to operate the wrong buttons and not to drop the camera. • Press 3/4 to select a setting, press 2/1 to select an option, and press [MENU/SET]. 3 Decide on your poses while looking at the monitor. • The AF area is displayed around the subject’s face by the Face Detection function.
Recording Recording settings in Self Shot Mode When you press [MENU/SET] in step 2, you can change the following settings. • You can also change the [Slimming Mode] setting in [Self Shot] in the [Rec] menu. (P49) Settings ([Soft Skin]) Description of settings Makes people’s faces look brighter and their skin tones look softer. [ ] ([OFF])/[ ] ([Low])/[ ] ([Medium])/[ ] ([High]) Blurs the background. The in-focus portion guide is displayed on the screen.
Recording • When the [Soft Skin] is set – The smoothing effect is applied to the part that has a similar tone to the complexion of a subject, as well. – This mode may not be effective under insufficient lighting. • When a setting other than [OFF] is selected for [Defocusing], display of the recording screen will be delayed more than usual.
Recording Taking panorama pictures in Self Shot Mode You can also take panorama pictures in Self Shot Mode. By recording with Panorama Shot Mode, you can enjoy a variety of self-portraits, such as those with your friends or those incorporating a wide background. • For information on taking pictures in Panorama Shot Mode, please also refer to P67 “Taking panorama pictures (Panorama Shot Mode)”. 1 2 3 Press [MODE]. Press 3/4/2/1 to select [Panorama Shot], and then press [MENU/SET].
Recording ∫ Technique for Panorama Shot Mode Swivel the camera around its centre when moving it in the recording direction. Hold the camera with both hands, taking care not to shake it. • Swivel the camera at a speed of about 2 seconds per quarter Example: When you have selected [ ] in step 3 revolution. • If the camera shakes too much, pictures may not be able to be recorded, or the recorded panorama picture may become narrower (smaller).
Recording About the Monitor Press 4 to change. • During motion picture playback, panorama playback or a slide show, you can only select “Normal Display” or “No Display”. In Recording Mode Normal display Normal display 5 R1m10s 1 2 No display Guidelines¢ 1 Number of recordable pictures 2 Available recording time In Playback Mode Normal display 100-0001 1/5 Display with recording information 100-0001 No display 1/5 AWB 10:00 1.DEC.2015 Retouch 100 F3.
Recording Using the Zoom Applicable modes: You can zoom in to make people and objects appear closer or zoom out to record landscapes in wide angle. To make subjects appear further away use (Wide) Rotate the zoom lever towards Wide. To make subjects appear closer use (Tele) Rotate the zoom lever towards Tele. ∫ Screen display Example of display when Extra Optical Zoom (EZ), Intelligent Zoom and Digital Zoom are used together.
Recording Extra Optical Zoom (EZ) This function works when any of the picture sizes (P75) indicated with is selected. You can zoom in further than you can with the Optical Zoom without deteriorating the image quality. Maximum magnification: 27k (This includes the optical zoom magnification. The magnification level differs depending on [Picture Size] setting.) • “EZ” is an abbreviation of “Extra Optical Zoom”.
Recording Taking Pictures Using the Built-in Flash Applicable modes: Flash Do not cover it with your fingers or other objects. Switching to the appropriate flash setting Set the flash to match the recording. 1 Press 1 [‰].
Recording 2 Press 3/4 to select the setting and then press [MENU/SET]. Settings ([Auto]) ([iAuto])¢1 [‡] [ ] [ ] ([Auto/Red-Eye])¢2 [‰] [ [Œ] ([Forced Flash On]) ] ([Slow Sync./ Red-Eye])¢2 ([Forced Flash Off]) Description of settings The flash is automatically activated when the recording conditions make it necessary. The flash is automatically activated when the recording conditions make it necessary.
Recording ∫ Available Flash Settings in Recording Mode The available flash settings depend on the Recording Mode. (±: Available, —: Not available, ¥: Scene Mode initial setting) ‡ *+:; ,/ ï5 . 1í9 ¢ [ ‰ Œ ±¢ — — — ± ± ± ± — ± ± ¥ ± — ± — — — — ¥ ¥ — ± — ± — — — ¥ ± ± — ± — ¥ ] is displayed. • When [ ] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of subject and brightness. • When [ ], [ ] is set, [Red-Eye Removal] is enabled.
Recording ∫ The available flash range (approximation) [AUTO] in [Sensitivity] Wide Tele 0.6 m (2.0 feet) to 5.2 m (17 feet) 1.5 m (4.9 feet) to 2.6 m (8.5 feet) ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) Flash setting Shutter speed (Sec.) ‡ 1/60 to 1/2000 1 to 1/2000 ‰ Œ • In Intelligent Auto Mode, shutter speed changes depending on the identified scene. • In Scene Mode, shutter speed will be different from the above table.
Recording Taking Pictures with the Self-timer Applicable modes: 1 Press 2 [ë]. 2 Press 3/4 to select the setting and then press [MENU/SET]. [ ] Settings ([10sec.]) [ ] ([2sec.]) Description of settings Picture is taken 10 seconds after shutter is pressed. Picture is taken 2 seconds after shutter is pressed. • When using a tripod, etc., this setting is a convenient way to avoid the jitter caused by pressing the shutter button.
Recording Compensating the Exposure Applicable modes: Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Underexposed Properly exposed Compensate the exposure towards positive. 1 2 Overexposed Compensate the exposure towards negative. Press 3 [È] to display [Exposure Comp.]. Press 2/1 to compensate the exposure and then press [MENU/SET]. • The exposure compensation value appears on the screen.
Recording Taking Pictures with different image effects (Creative Control Mode) Recording Mode: This mode allows you to add any of 15 types of effects before recording. You can set the effects to add by selecting example images and checking them on the screen. 1 2 3 Press [MODE]. Press 3/4/2/1 to select [Creative Control], and then press [MENU/ SET]. Press 3/4 to select image effects and then press [MENU/SET]. A • The image effect of the selected example image will be applied in a preview display A.
Recording For details on how to select the “Creative Control Mode” settings, refer to P61. ¢ These pictures are examples to show the effect. [Expressive] This effect emphasises the colour to make a pop art picture. [Retro] This effect gives a faded image. [Old Days] This effect adds a bright, soft and nostalgic feel to the overall image. [High Key] This effect adds a bright, airy and soft feel to the overall image.
Recording [Low Key] This effect adds a dark and relaxing feel to the overall image and enhances bright parts. [Sepia] This effect creates a sepia image. [Dynamic Monochrome] This effect gives a higher contrast to create an impressive black and white picture. [Impressive Art] This effect gives your photo a dramatic contrast look. • If you select this effect with Panorama Shot Mode, seams between pictures may become noticeable.
Recording [High Dynamic] This effect produces the optimum brightness for both dark and bright parts. [Cross Process] This effect gives your photo a dramatic colour look. Items that can be set Colour Green tone/Blue tone/Yellow tone/Red tone • Press 2/1 to select the colour to enhance, and press [MENU/SET]. [Toy Effect] This effect reduces peripheral brightness to give the impression of a toy camera.
Recording [Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama. Items that can be set Direction of the blur Horizontal/Vertical • Press 2/1 to select the direction of the blur, and press [MENU/SET]. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are being dropped during motion picture recording. • No sound is recorded in motion pictures. • Approximately 1/10 of the time period is recorded.
Recording [Star Filter] This effect transforms pin-points of light into a star effect. [One Point Color] This effect leaves one selected colour to emphasise impressiveness. ∫ Set the colour to leave in 1 Fit the colour you want to leave in the frame at the centre of the screen, and then press [MENU/SET]. • You can set the colour again by pressing 2 Check the colour you have set, and then press [MENU/SET]. • The set colour is memorised even if the 2. camera is turned off.
Recording Taking panorama pictures (Panorama Shot Mode) Recording Mode: Pictures are recorded continuously while moving the camera horizontally or vertically, and are combined to make a single panorama picture. This mode allows you to add any of 13 types of effects before recording. 1 2 3 4 Press [MODE]. Press 3/4/2/1 to select [Panorama Shot], and then press [MENU/SET]. Press 3/4 to select the recording direction and then press [MENU/SET]. Press 3/4 to select image effects and then press [MENU/SET].
Recording 7 Press the shutter button fully and record a picture while moving the camera in a small circle in the direction selected in Step 3. Recording from left to right A Trace a half-circle with the camera, taking about 4 seconds. • Move the camera at a constant speed. Pictures may not be able to be recorded properly if the camera is moved too fast or slow. • If the camera is not panned enough (1/4 or less of a circle), the recording may not be successful.
Recording • The zoom position is fixed to Wide. • [Stabilizer] is fixed to [OFF]. • The focus, White Balance, and exposure are fixed at the optimum values for the first picture. As a result, if the focus or brightness changes substantially during recording, the entire panorama picture may not be recorded at the suitable focus or brightness. • White Balance is fixed to [AWB] while an image effect is applied.
Recording Taking pictures that match the scene being recorded (Scene Mode) Recording Mode: You can select any of 15 types of Scene Modes according to the subject and scene. 1 2 3 Press [MODE]. Press 3/4/2/1 to select [Scene Mode], and then press [MENU/SET]. Press 3/4/2/1 to select the Scene Mode and then press [MENU/SET].
Recording [Portrait] When taking pictures of people outdoors during the daytime, this mode allows you to improve the appearance and make their skin tones look healthier. ∫ Technique for Portrait Mode To make this mode more effective: 1 Rotate the zoom lever as far as possible to Tele. 2 Move close to the subject to make this mode more effective. [Soft Skin] When taking pictures of people outdoors during the daytime, this mode enables the texture of their skin to appear even softer than with [Portrait].
Recording [Night Portrait] This allows you to take pictures of a person and the background with near real-life brightness. • Use the flash. (You can set to [ ].) • Ask the subject not to move while taking a picture. • We recommend using a tripod and the Self-timer for taking pictures. • Shutter speed may slow down up to 1/4 seconds. • Noise may become visible when you take pictures in dark places. [Night Scenery] This allows you to take vivid pictures of the nightscape.
Recording [Food] This mode allows you to take pictures of food with a natural hue without being affected by the ambient light in restaurants, etc. [Baby1]/[Baby2] This takes pictures of a baby with a healthy complexion. It is possible to set different birthdays for [Baby1] and [Baby2]. You can display those during playback. ∫ Birthday setting 1 Press 3/4 to select [Age] and then press [MENU/SET]. 2 Press 3/4 to select [SET] and then press [MENU/SET]. 3 Enter the birthday.
Recording [High Sens.] This mode minimises the jitter of the subjects, and enables you to take pictures of these subjects in dimly lit rooms. ∫ Picture Size Select the picture size of 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1). [Starry Sky] This mode allows you to take vivid pictures of a starry sky or a dark subject. ∫ Setting the shutter speed Select a shutter speed of [15 sec.], [30 sec.] or [60 sec.]. • Press the shutter button fully to display the countdown screen.
Recording Using the [Rec] Menu For details on [Rec] menu settings, refer to P38. [Picture Size] Applicable modes: Set the number of pixels. The higher the numbers of pixels, the finer the detail of the pictures will appear even when they are printed onto large sheets. Settings [ Picture Size ] 4608k3456 ]¢ 3264k2448 [ ] 2048k1536 [ ]¢ 640k480 ] 4608k3072 [ [ [ [ 7 ]¢ 3264k2176 2.5 ] 2048k1360 [ ] 4608k2592 [ ] 1920k1080 ] 3456k3456 [ [ 2.
Recording [Sensitivity] Applicable modes: This allows the Sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. Settings [AUTO] [ ] Description of settings The ISO sensitivity is automatically adjusted according to the brightness.
Recording [White Balance] Applicable modes: In sunlight, under incandescent lights or in other such conditions where the colour of white takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest to what is seen by the eye in accordance with the light source.
Recording ∫ Auto White Balance Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a colour close to white, Auto White Balance may not function properly. In this case, set the White Balance to a mode other than [AWB].
Recording [AF Mode] Applicable modes: This allows the focusing method that suits the positions and number of the subjects to be selected. Settings [š] [ ] [Ø] Description of settings ([Face Detection]) The camera automatically detects the person’s face. (max. 12 areas) The focus and exposure can then be adjusted to fit that face no matter what portion of the picture it is in. ([9-Area])¢ Up to 9 points for each AF area can be focused.
Recording ∫ About [š] ([Face Detection]) The following AF area frames are displayed when the camera detects the faces. Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as the faces within the yellow AF areas are also brought into focus.
Recording [i.Exposure] Applicable modes: Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to real life. Settings: [ON]/[OFF] • Compensation effect may not be achieved depending on the conditions. [i.Zoom] Applicable modes: Zoom magnification can be increased while minimising deterioration of the image quality. Settings: [ON]/[OFF] • Refer to P54 for details.
Recording [Burst Shooting] Applicable modes: Pictures are taken continuously while the shutter button is pressed. Settings Description of settings Burst speed [˜] ([Burst On]) approx. 1.4 pictures/second • The burst speed becomes slower halfway. The exact timing of this depends on the type of card and the Picture Size. Burst speed Maximum recordable pictures 200 pictures¢ approx. 3.5 pictures/second • This can be set only during Normal Picture Mode. • The picture size is fixed to 3M (4:3), 2.
Recording • Depending on the operating conditions, it may take time to take the next picture if you repeat the recording of pictures. • It may take time to save pictures taken in Burst Mode on the card. If you take pictures continuously while saving, the maximum number of recordable pictures decreases. For continuous shooting, use of a high speed memory card is recommended. • The burst speed (pictures/second) may become slower depending on the recording environment.
Recording [Red-Eye Removal] Applicable modes: When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed whenever the flash is used. The camera automatically detects red-eye and corrects the picture. Settings: [ON]/[OFF] • This function works only when the camera detects a face. • Under certain circumstances, red-eye cannot be corrected. [Stabilizer] Applicable modes: The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter.
Recording [Date Stamp] Applicable modes: You can take a picture with date and time of recording. Settings Description of settings [W/O TIME] Stamp the year, month, and day. [WITH TIME] Stamp the year, month, day, hour, and minutes. [OFF] — • Date information for pictures recorded with the [Date Stamp] set cannot be deleted. • When printing pictures with [Date Stamp] at a shop or with a printer, the date will be printed on top of the other if you choose to print with the date.
Recording Using the [Motion Picture] Menu For details on [Motion Picture] menu settings, refer to P38. • The [Motion Picture] menu is not displayed in the following cases. – [Soft Focus]/[Star Filter] (Creative Control Mode) [Rec Quality] Applicable modes: This sets up the picture quality of motion pictures. Settings Picture size [HD] 1280k720 [VGA] 640k480 [QVGA] 320k240 fps Aspect ratio 16:9 30 4:3 • When recording to the built-in memory, [Rec Quality] is fixed to [QVGA].
Playback/Editing Various methods of playback You can play back the recorded pictures in various methods. 1 2 3 Press [(]. Press [MODE]. Press 3/4/2/1 to select item, and then press [MENU/SET]. • Following items can be selected.
Playback/Editing [Slide Show] You can play back the pictures you have taken in sequence at specified intervals. This playback method is recommended when you have connected the camera to a TV set to view the pictures you have taken. 1 Select the group to play back by pressing 3/4, and then press [MENU/SET]. Slide Show All Category Selection • During [Category Selection], press 3/4/2/1 to select a category, and then press [MENU/SET]. Refer to P90 for category details.
Playback/Editing ∫ Changing the slide show settings You can change the settings for Slide Show Playback by selecting [Effect] or [Setup] on the slide show menu screen. [Effect] Screen effects can be added to picture transitions. [ON]/[OFF] • When playing back a panorama picture, the [Effect] setting is disabled. Slide Show Start ON Effect Setup Select screen effect Cancel Select Set [Setup] [Duration] or [Repeat] can be set.
Playback/Editing [Category Selection] This mode allows you to search images by Scene Mode or other categories (such as [Portrait], [Scenery] or [Night Scenery]) and sort the pictures into each of the categories. You can then play back the pictures in each category. Press 3/4/2/1 to select the category and then press [MENU/SET] to set. • You can play back only the category in which an image has been found. ∫ About the categories to be sorted Category Recording information e.g.
Playback/Editing [Calendar] You can search for images by recorded date. 1 2 Press 3/4/2/1 to select the date you want to search. Press [MENU/SET] to display a list of pictures. 1/52 • Pictures are displayed with Multi Playback (30 screens). The cursor appears on the picture at the beginning of the selected date. 3 Press 3/4/2/1 to select a picture and then press [MENU/SET]. • To continue the search, return to the previous screen by rotating the zoom lever towards [W].
Playback/Editing Having Fun with Recorded Pictures ([Creative Retouch]) You can add your desired effects to the pictures that you have taken. • The processed pictures are newly generated, so be sure that you have enough space in the built-in memory or on the card. Note also that processing will not be possible if the Write-Protect switch of the card is in the [LOCK] position. • Effects may be difficult to see depending on the picture. 1 2 Press 2/1 to select a picture, and then press 3.
Playback/Editing Using the [Playback] Menu For details on [Playback] menu settings, refer to P38. You can perform actions like cropping recorded pictures, as well as set up the protection of recorded images, etc. • With [Creative Retouch], [Resize] or [Cropping], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture.
Playback/Editing ∫ To pause the recording of location information Press [MENU/SET] while recording of the location information onto pictures is taking place. • During a suspended period, [±] is displayed. Select the period with [±] to restart the recording process from the picture you left off. ∫ To delete the received location information 1 Select [Location Logging] on the [Playback] menu. 2 Press 3/4 to select [Delete Location Data] and then press [MENU/SET].
Playback/Editing [Resize] To allow easy posting to web pages, attachment to email etc., picture size (number of pixels) is reduced. 1 2 3 Select [Resize] on the [Playback] menu. Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture and size. [SINGLE] setting 1 Press 2/1 to select the picture, and then press [MENU/SET]. 2 Press 2/1 to select the size, and then press [MENU/ SET]. [MULTI] setting 1 Press 3/4 to select the size, and then press [MENU/ SET].
Playback/Editing [Cropping] You can enlarge and then clip the important part of the recorded picture. 1 2 3 4 Select [Cropping] on the [Playback] menu. Press 2/1 to select the picture, and then press [MENU/SET]. Use the zoom lever and press 3/4/2/1 to select the parts to be cropped. Zoom lever (W): Reduction Zoom lever (T): Enlargement 3/4/2/1: Move Press [MENU/SET]. • Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.
Playback/Editing [Protect] You can set protection for pictures you do not want to be deleted by mistake. 1 2 3 Select [Protect] on the [Playback] menu. Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET]. [SINGLE] [MULTI] • The settings are cancelled when [MENU/SET] is pressed again. 1 2 3 4 5 6 • Exit the menu after it is set. ∫ Cancelling all the [Protect] settings 1 Select [Protect] on the [Playback] menu.
Playback/Editing [Copy] You can copy the data of the pictures you have taken from the built-in memory to a card or from a card to the built-in memory. 1 2 Select [Copy] on the [Playback] menu. Press 3/4 to select the copy destination and then press [MENU/SET]. [ ] ([IN>SD]): All the picture data in the built-in memory are copied onto the card at one time. [ ] ([SD>IN]): One picture at a time is copied from the card to the built-in memory. Press 2/1 to select the picture and then press [MENU/SET].
Wi-Fi Wi-FiR function ∫ Use the camera as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device.
Wi-Fi ∫ About the Wi-Fi connection lamp Lit blue: The Wi-Fi connection is on standby Blinking blue: Sending/receiving data through the Wi-Fi connection ∫ About the [Wi-Fi] button Pressing and holding [Wi-Fi] before connecting to Wi-Fi (When connecting to a smartphone/tablet) • The information required for connecting the smartphone/tablet to this unit (QR code, SSID and password) is displayed.
Wi-Fi What you can do with the Wi-Fi function Controlling with a Smartphone/Tablet Recording images remotely with a smartphone (P107) Playing back pictures in the camera (P107) Saving images stored in the camera (P108) Sending acquired location information to the camera (P109) When sending images to PC Sending an image each time a recording is made (P114) Sending selected images (P115) To transfer images automatically (P116) These operating instructions refer to both smartphones and tablets as “smart
Wi-Fi Controlling with a Smartphone/Tablet Using a smartphone, you can record images on the camera and save them. You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on your smartphone. Installing the smartphone/tablet app “Image App” The “Image App” is an application provided by Panasonic. • OS App for AndroidTM: Android 2.3.3 or higher App for iOS: iOS 6.0 or higher (Please note that the iPhone 3GS is not supported.) 1 2 Connect the smartphone to a network.
Wi-Fi Connecting to a smartphone/tablet By pressing and holding [Wi-Fi], you can easily connect the camera to a smartphone or tablet. Preparations • Install the “Image App” in advance. (P102) 1 Press and hold [Wi-Fi]. • The information required for connecting the smartphone to this unit (QR code, SSID and password) is displayed. • You can also set up a Wi-Fi connection to the camera by selecting the following menu items: 1 Press [Wi-Fi].
Wi-Fi 2 Operate the smartphone. • The connection method differs according to your smartphone. • When the connection is complete, a message indicating that the smartphone is connected is displayed on its screen. (After this operation, it may take a while for the connection to be completed.) If you are using an iOS device When scanning the QR code to set up a connection (If you are reconnecting the camera, steps 1 to 5 are not required) 1 Start “Image App”. (P102) 2 Select [QR code], and then select [OK].
Wi-Fi When using an SSID and password to set up a connection 1 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet. 2 Select the SSID displayed on the screen of the camera. Wi-Fi 0123456789ABC 3 Enter the password displayed on the screen of the camera. (Only when connecting for the first time) 4 Start “Image App”. (P102) If you are using an Android device When scanning the QR code to set up a connection 1 Start “Image App”. (P102) 2 Select [QR code].
Wi-Fi ∫ Terminating the connection After use, terminate the connection to the smartphone. Once turning off the connection, you can perform normal recording and playback. 1 Press [ ]. • Confirmation screen is displayed. 2 On the smartphone, close “Image App ”. It is executed when [Yes] is selected. (If you are using an iOS device) On the screen of “Image App”, press the home button to close the app.
Wi-Fi Taking pictures via a smartphone/tablet (remote recording) 1 2 Connect to a smartphone. (P103) Operate the smartphone. 1 Select [ ]. 2 Operate the zoom to decide on the composition. 3 Release the shutter. • The recorded images are saved in the camera. • Motion pictures cannot be recorded. • Some settings are not available. • If you use the zoom, the lens barrel will be extended or A retracted. This may cause the camera to tilt. We recommend fixing the camera on a tripod or other support.
Wi-Fi Saving images stored in the camera 1 2 Connect to a smartphone. (P103) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch and hold an image, and drag it to save it. • Motion pictures cannot be saved.
Wi-Fi Sending location information to the camera from a smartphone/tablet You can acquire location information from a smartphone, and write it on images afterwards. • You can write location information sent from a smartphone on images by using [Location Logging] in the [Playback] menu of the camera.
Wi-Fi Sending images to a smartphone/tablet by controlling the camera ∫ Methods for sending and images that can be sent JPEG Motion JPEG Sending an image each time a recording is made ([Send Images While Recording]) ± — Sending selected images ([Send Images Stored in the Camera]) ± — • Some images may not be played back or sent depending on the device. • For information on the playback of images, check the operating instructions of the destination device.
Wi-Fi Sending an image each time a recording is made ([Send Images While Recording]) 1 2 3 Press [Wi-Fi]. Press 3/4/2/1 to select [New Connection], and then press [MENU/SET]. Press 3/4 to select [Send Images While Recording], and then press [MENU/SET]. Select a function Remote Shooting & View Send Images While Recording Send Images Stored in the Camera Cancel 4 5 6 7 8 9 Select Press 3/4 to select [Smartphone], and then press [MENU/ SET]. Press [MENU/SET]. Press [MENU/SET].
Wi-Fi Sending selected images ([Send Images Stored in the Camera]) 1 2 3 Press [Wi-Fi]. Press 3/4/2/1 to select [New Connection], and then press [MENU/SET]. Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/SET]. Select a function Remote Shooting & View Send Images While Recording Send Images Stored in the Camera Cancel 4 5 6 7 8 9 Select Set Press 3/4 to select [Smartphone], and then press [MENU/ SET]. Press [MENU/SET]. Press [MENU/SET].
Wi-Fi When sending images to PC You can send pictures and motion pictures recorded with this unit to a PC. You can also set this unit so that images on it are transferred automatically while it is being charged.
Wi-Fi To create a folder that receives images • Create a PC user account [account name (up to 254 characters) and password (up to 32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. • The name of a destination folder must consist of 20 or less alphanumeric characters. (For Windows) Supported OS: Windows VistaR/WindowsR 7/WindowsR 8/WindowsR 8.
Wi-Fi Sending selected images ([Send Images Stored in the Camera]) 1 2 3 4 5 6 7 8 9 Press [Wi-Fi]. Press 3/4/2/1 to select [New Connection], and then press [MENU/SET]. Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/ SET]. Press 3/4 to select [PC], and then press [MENU/SET]. Press [MENU/SET]. • For details on the connection methods, refer to P120. Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].
Wi-Fi To transfer images automatically ([Smart Transfer]) Smart Transfer is a function that automatically transfers images in the camera to a PC. The transfer starts when you connect the camera to the AC adaptor (supplied). Example of [Auto Transfer] A AC adaptor (supplied) B USB connection cable (supplied) C PC 1 2 3 4 Set [Auto Transfer] to [ON] Record Charge Start a transfer To perform Smart Transfer, follow the steps below: 1 Set up Smart Transfer (initial setup).
Wi-Fi Configuring [Smart Transfer] When using Smart Transfer for the first time, follow the steps below to set it up. From the next time on, you can change the settings from [Set Destination] (P118). 1 2 3 4 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P38) Press 3/4 to select [Smart Transfer], and press [MENU/SET]. Select the method for connecting to a wireless access point, and set. • Refer to P120 for details. Set the transfer destination.
Wi-Fi [Set Destination] Changing the transfer destination or settings of images. 1 2 3 4 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P38) Press 3/4 to select [Smart Transfer], and press [MENU/SET]. Press 3/4 to select [Set Destination], and press [MENU/SET]. Press 3/4 to select the item, and press [MENU/SET]. Item Description of settings [Destination] Changes the wireless access point to be connected. Select the method for connecting to a wireless access point, and set.
Wi-Fi About Connections You can select a connection method after selecting a Wi-Fi function and a destination. When connecting with the same settings as the previous ones, you can use the Wi-Fi function quickly by connecting via [History Connection] or [Favorite Connection]. Connecting to a PC ([Via Network]) (P120) Connects via a wireless access point. Connect to the network (AP) Via Network A Cancel OK Connecting to a smartphone/tablet ([Direct]) (P123) Your device connects directly to this unit.
Wi-Fi Connecting to a PC (via a network) You can select the method for connecting to a wireless access point. ¢ WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the manual of the wireless access point.
Wi-Fi If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted. • When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using. 1 2 Press 3/4 to select the wireless access point you are connecting to, and press [MENU/SET].
Wi-Fi ∫ Entering Text When a screen that looks like the one on the right is displayed, you can enter characters. (Only alphabetical characters and symbols can be entered.) GHI A a ABC DEF JKL MNO PQRS TUV WXYZ 1 & A A aa Delete Delete Set Set Cancel 1 Select Input Press 3/4/2/1 to select text and then press [MENU/SET] to register. • Move the cursor to [ ] and then press [MENU/SET] to switch text between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special characters).
Wi-Fi Connecting to a smartphone/tablet (direct connection) You can directly connect your device and the camera. Enter SSID and password Manual Connection OK Cancel Connection method [Manual Connection] Description of settings Enter the SSID and password into the device. The SSID and password are displayed on the connection waiting screen of this unit. • You can also set up a connection by scanning a QR code with a smartphone.
Wi-Fi Connecting quickly with the same settings as the previous ones ([History Connection]/[Favorite Connection]) When the Wi-Fi function is used, a record is saved in the history. You can register records as favourites. Connecting from the history or favourites allows you to easily connect with the same settings as the previous ones. 1 2 Press [Wi-Fi]. Press 3/4/2/1 to select [History Connection] or [Favorite Connection], and then press [MENU/ SET].
Wi-Fi Editing the items registered to favourites 1 2 3 4 Press [Wi-Fi]. Press 3/4/2/1 to select [Favorite Connection], and then press [MENU/SET]. Select the favourite item you want to edit with 3/4, and then press 1. Press 3/4 to select the item, and press [MENU/SET]. Item Description of settings [Remove from Favorite] [Change the Order in Favorite] [Change the Registered Name] — Select the destination with 3/4, and then press [MENU/SET].
Wi-Fi About settings for sending images To send images, select [New Connection] , and select the method for sending them. Even after completing the connection, you can still change the size of the images to be sent. Select a function Remote Shooting & View Send Images While Recording Send Images Stored in the Camera Cancel Select Set ∫ Images that can be sent Destination JPEG Motion JPEG¢ [Smartphone] ± — [PC] ± ± ¢ Sending by [Send Images While Recording] is not available.
Wi-Fi Send Images While Recording A picture can be automatically sent to a specified device every time you take it. • Since the camera gives priority to recording, sending may take longer during the recording. • When connected with [Send Images While Recording], [ ] is displayed on the recording screen, and [ ] is displayed while sending a file. • If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will not be resent.
Wi-Fi [Wi-Fi Setup] Menu For details on how to select the [Wi-Fi] menu settings, refer to P38. Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi. 1 2 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. Press 3/4 to select item, and press [MENU/SET]. [Smart Transfer] — • Refer to P116 for details. [PC Connection] You can set the workgroup.
Wi-Fi [Wi-Fi Password] To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Delete] • For details on how to enter characters, refer to “Entering Text” section on P122. • Make a copy of password.
Connecting to other equipment Playing Back Pictures on a TV Screen Pictures recorded with this unit can be played back on a TV screen. Preparations: Set the [TV Aspect]. (P45) Turn this unit and the TV off. 1 Connect the camera and a TV. • Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may bend out of shape, which may cause malfunction.) • Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
Connecting to other equipment The recorded still pictures can be played back on a TV with an SD Memory Card slot. • Depending on the TV model, pictures may not be displayed on the full screen. • The file format of the motion pictures that can be played back differs depending on the TV model. • In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of panorama pictures may not work. • For cards compatible with playback, refer to the operating instructions of the TV.
Connecting to other equipment Saving still pictures and motion pictures on your PC You can transfer the pictures in the camera to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. • If the computer being used does not support SDXC Memory Cards, a message prompting you to format may appear. (Doing so will cause recorded images to be erased so do not choose to format.
Connecting to other equipment Transferring images to a PC 1 Connect the computer and camera with the USB connection cable (supplied). • Please turn this unit on and your PC before connecting. • Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may bend out of shape, which may cause malfunction.) • Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).
Connecting to other equipment ∫ About the folder structure of the camera The content (folder structure) of the built-in memory of the camera/the card is displayed on a PC as follows: • Built-in Memory • Card DCIM 100_PANA P1000001.JPG P1000002.JPG DCIM: Images 1 Folder number 2 File number 3 JPG: Still pictures MOV: Motion pictures ¢ Cannot be created in the built-in memory. P1000999.JPG 101_PANA 999_PANA MISC PRIVATE • A new folder is created when pictures are taken in the following situations.
Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s monitor. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures from the built-in memory.
Connecting to other equipment Selecting a single picture and printing it 1 2 Press 2/1 to select the picture and then press [MENU/SET]. PictBridge Press 3 to select [Print start] and then press [MENU/SET]. 6LQJOH 6HOHFW 3ULQW VWDUW 3ULQW ZLWK 'DWH 1XP RI SULQWV 3DSHU 6L]H 3DJH /D\RXW • Refer to P137 for the items which can be set before starting to print the pictures. • Disconnect the USB connection cable after printing.
Connecting to other equipment Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures in a paper size or a layout which is not supported by the camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.
Connecting to other equipment [Paper Size] { Settings on the printer are prioritised. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm • Paper sizes not supported by the printer will not be displayed.
Connecting to other equipment [Page Layout] (Layouts for printing that can be set with this unit) { Settings on the printer are prioritised. á 1 picture with no frame on 1 page â 1 picture with a frame on 1 page ã 2 pictures on 1 page ä 4 pictures on 1 page • An item cannot be selected if the printer does not support the page layout.
Others Screen Display ∫ In recording 1 2 3 4 5 6 7 23 22 21 20 19 18 17 16 5 8 9 3s 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 10 11 Recording Mode Recording Quality (P86) Picture Size (P75) Flash (P55) Optical Image Stabiliser (P84) Jitter alert (P24): White Balance (P77) Creative control adjustment display (P61): Battery indication (P14) Burst (P82) Intelligent Exposure (P81) Focus (P31) AF area (P31) Self-timer (P59) Shutter speed (P30) Aperture value (P30) ISO sensitivity (P76) 100 F3.
Others ∫ In playback 1 15 14 13 12 11 2 3 4 100 _ 0001 03s 5 6 1/5 7 8 10 9 1 2 3 4 5 6 7 8 9 Playback Mode (P87) Protected picture (P97) Date stamped display (P85) After Creative Retouch (P92) Picture Size (P75) Battery indication (P14) Picture number Total pictures Elapsed playback time (P35): 08m30s ¢ Location Information display (P93, 109) Creative Retouch (P92) Motion picture playback (P35) Play panorama (P69) 10 Recorded date and time World Time (P41): “ Recording information (P52) Age
Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [This picture is protected] • Delete the picture after cancelling the protect setting. (P97) [Some pictures cannot be deleted]/[This picture cannot be deleted] • Pictures not based on the DCF standard cannot be deleted. Perform formatting (P45) on this unit after saving necessary data on a PC, etc. [Built-in memory full.
Others [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with this unit. (P19) [Insert SD card again]/[Try another card] • An error has occurred accessing the card. Insert the card again. • Insert a different card. [Read Error/Write Error Please check the card] • It has failed to read or write data. Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again. • The card may be broken. • Insert a different card.
Others [Failed to connect wireless access point]/[Connection failed]/[No destination found] • Check following regarding the wireless access point. – The wireless access point information set on this unit is wrong. Check the authentication type, encryption type, and encryption key. (P121) – Power of the wireless access point is not turned on. – Setting of the wireless access point is not supported by this unit. • Check the network setting of the destination.
Others Troubleshooting First, try out the following procedures (P145–155). If the problem is not resolved, it may be improved by selecting [Reset] (P45) on the [Setup] menu. Battery and power source The camera cannot be operated even when it is turned on. The camera turns off immediately after it is turned on. • The battery is exhausted. > Charge the battery. • If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [Economy].
Others Recording The picture cannot be recorded. • Is there any memory remaining on the built-in memory or the card? > Delete the pictures which are not necessary to increase available space in the memory. (P37) • You may not be able to record for a short while after turning this unit on when using a large capacity card. The recorded picture is whitish. • The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
Others The brightness or the hue of the recorded picture is different from the actual scene. • When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may introduce slight changes to brightness and colour. These are a result of the characteristics of the light source and do not indicate a malfunction. When recording pictures or half-pressing the shutter button, reddish stripes may appear on the monitor.
Others Monitor The monitor becomes darker or brighter for a moment. • This phenomenon appears when you press the shutter button halfway to set the aperture value and does not affect the recorded pictures. • This phenomenon also appears when the brightness changes when the camera is zoomed or when the camera is moved. This is because of operation of the automatic aperture of the camera, and it is not a malfunction. The monitor flickers indoors.
Others Playback The picture is not played back. The recorded pictures are not displayed. • Is there a picture on the built-in memory or the card? The pictures on the built-in memory appear when a card is not inserted. The picture data on the card appears when a card is inserted. • Is this a folder or picture which was processed in the PC? If it is, it cannot be played back by this unit. • Has [Category Selection] been set for playback? > Change to [All].
Others Red part of the recorded image has changed colour to black. • When Red-Eye Removal ([ ], [ ]) is in operation, if you take a picture of a subject with red colour surrounded by a skin tone colour, that red part may be corrected to black by the Red-Eye Removal function. > It is recommended to take a picture with the flash setting set to [‡], [‰] or [Œ], or [Red-Eye Removal] on the [Rec] menu set to [OFF]. (P84) [Thumbnail is displayed] appears on the screen.
Others About the Wi-Fi function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. (General tips for using a Wi-Fi connection) • Try [Reset Wi-Fi Settings] in the [Setup] menu. • Use within the communication range of the device to be connected. • Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? > Radio waves may get interrupted when used simultaneously.
Others This unit is not displayed in the Wi-Fi setting screen of the smartphone. • From the Wi-Fi setting menu on the smartphone, turn off and then on the Wi-Fi function. Images cannot be transmitted to a PC. • When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not be possible. When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and password are not recognised, so I cannot connect to the PC.
Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? > Set the TV input to External Input Mode. The display areas on the TV screen and the camera’s monitor are different. • Depending on the TV model, the pictures may be elongated horizontally or vertically or they may be displayed with their edges cut off. The motion pictures cannot be played back on a TV.
Others The ends of the pictures are cut at printing. • When using a printer with a Cropping or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.) • When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be printed. The panorama picture is not printing correctly.
Others When pictures are taken using the zoom, they are slightly distorted and the areas around the subject contain colours which are not actually present. • It is possible that the subject may be warped slightly, or the borders get coloured, depending on the zoom magnification, due to the characteristics of the lens, but this is not a malfunction. Zooming stops instantaneously. • When using the Extra Optical Zoom, the zooming action will stop temporarily. This is not a malfunction.
Others Cautions for Use Optimal use of the camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
Others Cleaning Before cleaning the camera, remove the battery or disconnect the power plug from the outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. If the surrounding temperature is too high or too low, the operating time of the battery may become shorter. Always remove the battery after use. • Place the removed battery in a plastic bag, and store or carry away from metallic objects (clips, etc.).
Others Card Do not leave the card where the temperature is high, where electromagnetic waves or static electricity are easily generated or exposed to direct sunlight. Do not bend or drop the card. • The card may be damaged or the recorded content may be damaged or deleted. • Put the card in the card case or the storage bag after use and when storing or carrying the card. • Do not allow dirt, dust, or water to get into the terminals on the back of the card and do not touch the terminals with your fingers.
Others When not using the camera for a long period of time • Store the battery in a cool and dry place with a relatively stable temperature: [Recommended temperature: 15 oC to 25 oC (59 oF to 77 oF), Recommended humidity: 40%RH to 60%RH] • Always remove the battery and the card from the camera. • If the battery is left inserted in the camera, it will discharge even if the camera is turned off.
• SDXC Logo is a trademark of SD-3C, LLC. • QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. • iPhoto, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. • iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.