VQT0V40ENG.book 1 ページ 2006年2月27日 月曜日 午後1時19分 Operating Instructions Digital Camera Model No. DMC-TZ1 PP Before connecting, operating or adjusting this product, please read the instructions completely. For USA assistance, please call: 1-800-272-7033 or send e-mail to : digitalstillcam@panasonic.com For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.
VQT0V40ENG.book 2 ページ 2006年2月27日 月曜日 午後1時19分 Before Use Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
VQT0V40ENG.book 3 ページ 2006年2月27日 月曜日 午後1時19分 Before Use FCC Note: (U.S. only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VQT0V40ENG.book 4 ページ 2006年2月27日 月曜日 午後1時19分 Before Use -If you see this symbolInformation on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. ∫ Care of the camera • Do not strongly shake or bump the camera. The camera may stop operating normally, pictures may not be recorded or the lens may be damaged.
VQT0V40ENG.book 5 ページ 2006年2月27日 月曜日 午後1時19分 Before Use Adjust part A to the desired mode. The mode dial can be rotated 360o. Rotate it slowly and surely to adjust to each mode. (Do not adjust it to parts where there is no mode.) SCN1 A N2 ∫ When not using the camera for a long period of time • Store the battery in a cool and dry place with a relatively stable temperature.
VQT0V40ENG.book 6 ページ 2006年2月27日 Before Use ∫ About indications in these operating instructions SCN1 SCN2 Modes indicated here allow you to use the functions or settings described on this page. Set the mode dial to any of the modes to use the functions or settings. Convenient or helpful information for use of the camera is described.
VQT0V40ENG.book 7 ページ 2006年2月27日 Contents Before Use Information for Your Safety ....................... 2 About The Mode Dial ................................ 5 Preparation Standard Accessories ............................... 9 Names of the Components ....................... 9 Quick Guide ............................................ 11 Charging the Battery with the Charger ... 12 About the Battery (charging/ number of recordable pictures) ........... 13 Inserting/Removing the Battery ..............
VQT0V40ENG.book 8 ページ 2006年2月27日 • [SENSITIVITY] Setting the light sensitivity ................ 72 • [ASPECT RATIO] Setting the aspect ratio of pictures ... 73 • [PICT.SIZE]/[QUALITY] Setting a picture size and quality that matches your use of the pictures............................................. 73 • [AUDIO REC.] Recording still pictures with audio .... 74 • [METERING MODE] Deciding the method to measure brightness......................................... 75 • [AF MODE] Setting the focus method......
VQT0V40ENG.book 9 ページ 2006年2月27日 月曜日 午後1時19分 Preparation Preparation Standard Accessories Check that all the accessories are included before using the camera. 1 2 DE-A25B CGA-S007A 3 4 K1HA08CD0007 5 K1HA08CD0008 6 VFC4090 7 1 Battery Pack (Indicated as “Battery” in the text) 2 Battery Charger (Indicated as “Charger” in the text) 3 USB Connection Cable 4 AV Cable 5 CD-ROM 6 Strap 7 Lens Cap/Lens Cap String 8 Battery Carrying Case • SD Memory Cards are optional.
VQT0V40ENG.
VQT0V40ENG.book 11 ページ 2006年2月27日 月曜日 午後1時19分 Preparation • Set the clock. (P18) SCN1 This is an overview of how to record and playback pictures with the camera. For each step, be sure to refer to the pages indicated in brackets. 3 Turn the camera on to take pictures. SC N2 Quick Guide 1 Charge the battery. (P12) OFF ON 1 Set the mode dial to [ ]. 2 Press the shutter button to take pictures. (P25) SCN2 2 Insert the battery and the card. (P14, 15) 4 Play back the pictures.
VQT0V40ENG.book 12 ページ 2006年2月27日 月曜日 午後1時19分 Preparation Charging the Battery with the Charger The battery is not charged when the camera is shipped. Charge the battery before use. 1 Insert the battery terminals and attach the battery to the charger. 2 Connect the charger to the electrical outlet. • Charging starts when the [CHARGE] indicator A lights green. • Charging is complete when the [CHARGE] indicator A turns off (after about 170 minutes). 3 Detach the battery after charging is complete.
VQT0V40ENG.book 13 ページ 2006年2月27日 月曜日 午後1時19分 Preparation About the Battery (charging/number of recordable pictures) ∫ Battery indication The remaining battery power appears on the screen. [It does not appear when you use the camera with the AC adaptor (DMW-AC5; optional) connected.] The number of recordable pictures varies depending on the recording interval time. If the recording interval time becomes longer, the number of recordable pictures decreases. [e.g.
VQT0V40ENG.book 14 ページ 2006年2月27日 月曜日 午後1時19分 Preparation Inserting/Removing the Battery 3 1 Close the card/battery door. 2 Slide the release lever in the direction of the arrow. • Check that the camera is turned off and that the lens is retracted. 1 Slide the release lever in the direction of arrow and open the card/battery door. OPEN 2 Insert: Insert the charged battery until it clicks. Remove: Slide the lock A to remove the battery.
VQT0V40ENG.book 15 ページ 2006年2月27日 月曜日 午後1時19分 Preparation Inserting/Removing the Card • Check that the camera is turned off and that the lens is retracted. • Prepare an SD Memory Card (optional) or a MultiMediaCard (optional). • You can record or play back pictures on the built-in memory when you are not using a card. (P16) 1 Slide the release lever in the direction of the arrow and open the card/battery door. OPEN LOCK 3 1 Close the card/battery door.
VQT0V40ENG.book 16 ページ 2006年2月27日 月曜日 午後1時19分 Preparation C: When using the card D: When accessing the card About the Built-in Memory/the Card ∫ Built-in Memory [ ] You can record or play back pictures on the built-in memory when you are not using a card. • The built-in memory capacity is about 13.4 MB. • Picture size is fixed to QVGA (320k240 pixels) when recording motion pictures to the built-in memory. (P64) ∫ Card [ ] You can record or play back pictures on a card.
VQT0V40ENG.book 17 ページ 2006年2月27日 月曜日 午後1時19分 Preparation • On this unit, you can use SD Memory Cards of the following capacity (from 8 MB to 2 GB). 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (Maximum) Please confirm the latest information on the following website. Attaching the Lens Cap/Strap ∫ Strap (supplied) 1 Pass the strap through the strap eyelet. http://panasonic.co.jp/pavc/global/cs 1 (This Site is English only.
VQT0V40ENG.book 18 ページ 2006年2月27日 月曜日 午後1時19分 Preparation • When you turn the camera off, carry the camera or play back the pictures, attach the lens cap to protect the surface of the lens. • Detach the lens cap before turning on the camera in the recording mode. • If you turn the camera on and then rotate the zoom lever when the lens cap is attached, the message [REMOVE THE LENS CAP AND TURN THE CAMERA ON AGAIN] appears. Detach the lens cap and turn the camera off and on.
VQT0V40ENG.book 19 ページ 2006年2月27日 月曜日 午後1時19分 Preparation • Refer to [WORLD TIME] (P61) for information about setting the local time at the travel destination area. 3 Press [MENU/SET] several times to close the menu. • Turn the camera off after finishing setting the clock. Then turn it on and check that the clock setting is correct. ∫ Changing the clock setting 1 Press [MENU/SET] to display the menu and then press 2. 2 Press 4 to select the [SETUP] menu icon [ ] and then press 1.
VQT0V40ENG.book 20 ページ 2006年2月27日 月曜日 午後1時19分 Preparation 3 Press 3/4 to select the menu item. 1/4 SETUP CLOCK SET ∫ About the menu screen items • There are 4 menu screens (1/4, 2/4, 3/4 and 4/4). • You can switch menu screens from any menu item by rotating the zoom lever. WORLD TIME 1/4 MONITOR n0 TRAVEL DATE OFF CLOCK SET 1SEC. WORLD TIME SETUP AUTO REVIEW MONITOR MENU EXIT SELECT SETUP 2/4 n0 SAVE POWER AUTO REVIEW BEEP 1SEC. MENU EXIT SELECT SHUTTER VOLUME 2/4 SETUP ECO 2MIN.
VQT0V40ENG.book 21 ページ 2006年2月27日 月曜日 午後1時19分 Preparation [TRAVEL DATE] Press [ SET ] to display the [SETUP] menu and select this item. (P19) [SET]: When taking a picture, the date on which it was taken is recorded. [OFF]: When taking a picture, the date on which it was taken it is not recorded. • Refer to P59 for information about setting [TRAVEL DATE]. • The [TRAVEL DATE] setting also affects simple mode [ ]. MENU [AUTO REVIEW] Press [ SET ] to display the [SETUP] menu and select this item.
VQT0V40ENG.book 22 ページ 2006年2月27日 月曜日 午後1時19分 Preparation [ECONOMY] Press [ SET ] to display the [SETUP] menu and select this item. (P19) Battery life is saved by reducing the brightness of the LCD monitor and turning it off automatically when the camera is not being used in recording mode. [LEVEL 1]: The LCD monitor turns off if the camera is not operated for about 15 seconds in recording mode.
VQT0V40ENG.book 23 ページ 2006年2月27日 月曜日 午後1時19分 Preparation [RESET] Press [ SET ] to display the [SETUP] menu and select this item. (P19) The [REC] or [SETUP] menu settings are reset to the initial settings. • The birthday setting for [BABY1]/[BABY2] (P57) in scene mode, the number of days that have passed since the departure date for [TRAVEL DATE] (P59) and the [WORLD TIME] setting (P61) are also reset when the [SETUP] menu settings are reset. Also, [FAVORITE] (P82) is fixed to [OFF] and [ROTATE DISP.
VQT0V40ENG.book 24 ページ 2006年2月27日 Preparation [SCENE MENU] Press [ SET ] to display the [SETUP] menu and select this item. (P19) [AUTO]: [SCENE MODE] menu appears automatically when setting the mode dial to [ ] or [ ]. Select the desired scene mode. (P50) [OFF]: [SCENE MODE] menu does not appear when setting the mode dial to [ ] or [ ] and the camera is operated in the scene mode currently selected.
VQT0V40ENG.book 25 ページ 2006年2月27日 月曜日 午後1時19分 Basic Basic Taking Pictures ∫ Focus range Wide The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. • Remove the lens cap. SC N 2 SCN1 1 1 Turn the camera on. 2 Select normal picture mode [ ]. OFF ON In normal picture mode Tele 40 cm (1.31 feet) to ¶ 2m (6.56 feet) to ¶ • Refer to P49 for the focus range in macro mode.
VQT0V40ENG.book 26 ページ 2006年2月27日 月曜日 午後1時19分 Basic • To avoid noise, we recommend decreasing the ISO sensitivity (P72) or setting [PICT.ADJ.] to [NATURAL]. (P78) (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. the ISO sensitivity increases.) ∫ Tips for taking good pictures • Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart.
VQT0V40ENG.book 27 ページ 2006年2月27日 月曜日 午後1時19分 Basic • In the following cases, the camera will not focus on subjects properly. – When there are both near and distant subjects in a scene. – When there is dirt or dust on glass between the lens and the subject. – When there are illuminated or glittering objects around the subject. – When taking a picture in dark places. – When the subject is moving fast. – When the scene has low contrast. – When jitter occurs. – When recording a very bright subject.
VQT0V40ENG.book 28 ページ 2006年2月27日 月曜日 午後1時19分 Basic Taking Pictures in Simple Mode [AUTO REVIEW] OFF The recorded picture does not automatically appear. ON The recorded picture automatically appears on the screen for about 1 second. This mode allows beginners to take pictures easily. Only the basic functions appear in the menu to make operations simple. [BEEP] ∫ Basic menu settings LOW Soft operation sound 1 Press [MENU/SET].
VQT0V40ENG.book 29 ページ 2006年2月27日 月曜日 午後1時19分 Basic • Burst speed (P48): Low speed (2 frames/second) • [W.BALANCE] (P71): [AUTO] • [SENSITIVITY] (P72): [AUTO] • [ASPECT RATIO]/[PICT.SIZE]/[QUALITY] (P73): –[ ENLARGE]: / (5M)/Fine –[ 4qk6q/10k15cm]: / (2.5M EZ)/Standard –[ E-MAIL]: / (0.3M EZ)/Standard • [METERING MODE] (P75): [ ] (Multiple) • [AF MODE] (P75): [ ] (1-area-focusing) • [AF ASSIST LAMP] (P77): [ON] • [SLOW SHUTTER] (P77): [1/8 – ] • You cannot use the following functions in simple mode.
VQT0V40ENG.book 30 ページ 2006年2月27日 月曜日 午後1時19分 Basic Taking Pictures with the Zoom Using the Optical Zoom SCN1 SCN2 You can make people and subjects appear closer with the 10k optical zoom and landscapes can be recorded in wide angle. ∫ To make subjects appear closer use (Tele) Rotate the zoom lever towards Tele. • When the setting for picture size is [ ] (5M). 3 W W T T 10X ∫ To make subjects appear further away use (Wide) Rotate the zoom lever towards Wide.
VQT0V40ENG.book 31 ページ 2006年2月27日 月曜日 午後1時19分 Basic ∫ Extended optical zoom mechanism When you set the picture size to [ ] (3M EZ) (3 million pixels), the 5M (5 million pixels) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect.
VQT0V40ENG.book 32 ページ 2006年2月27日 月曜日 午後1時19分 Basic Using the Digital Zoom Further extending the zoom SCN1 SCN2 A maximum of 40k zoom can be achieved with the 10k optical zoom and the 4k digital zoom when [D.ZOOM] is set to [ON] in the [REC] menu. However, if a picture size that can use extended optical zoom is selected, a maximum of 50k zoom can be achieved with the 12.5k extended optical zoom and the 4k digital zoom.
VQT0V40ENG.book 33 ページ 2006年2月27日 月曜日 午後1時19分 Basic Checking the Recorded Picture (Review) 3 Press 3/4/2/1 to move the position. REVIEW4X SCN1 SCN2 You can check the recorded pictures while still in [REC] mode. 1 Press 4 [REV]. 4X 8X DELETE • When you change the magnification or the position to be displayed, the zoom position indication A appears for about 1 second so that you can check the enlarged area. REVIEW1X EXIT 1X DELETE • The last recorded picture appears for about 10 seconds.
VQT0V40ENG.book 34 ページ 2006年2月27日 月曜日 午後1時19分 Basic Playing Back Pictures The picture data on the built-in memory appears when a card is not inserted. The picture data on the card appears when a card is inserted. (P16) Press 2/1 to select the picture. 100 _ 0001 1/3 • The file number A and the picture number B only change one by one. Release 2/1 when the number of the desired picture appears to play back the picture.
VQT0V40ENG.book 35 ページ 2006年2月27日 月曜日 午後1時19分 Basic ∫ To delete [MULTI DELETE]/ [ALL DELETE] Deleting Pictures 1 Press [ The picture data on the built-in memory is deleted when a card is not inserted. The picture data on the card is deleted when a card is inserted. (P16) ∫ To delete a single picture ] twice. 2 Press 3/4 to select [MULTI DELETE] or [ALL DELETE] and then press [MENU/SET]. MULTI/ALL DELETE 1 Select the picture with 2/1.
VQT0V40ENG.book 36 ページ 2006年2月27日 月曜日 午後1時19分 Basic 4 Press [ ]. 5 Press 3 to select [YES] and then press [MENU/SET] to set. (Screen when selecting [MULTI DELETE]) MULTI DELETE DELETE THE PICTURES YOU MARKED? YES NO SELECT MENU SET MENU SET SET • [DELETE ALL PICTURES?] is displayed when using [ALL DELETE] and [DELETE ALL EXCEPT ?] is displayed when using [ALL DELETE EXCEPT ]. • When you delete all pictures, only pictures in either of the built-in memory or the card can be deleted.
VQT0V40ENG.book 37 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Advanced About the LCD Monitor Changing the information displayed D Normal display E Display with histogram F No display (Recording guide line) G No display ¢1 Histogram In playback mode 100 _ 0001 1/3 DISPLAY/LCD MODE 1ST DAY 9 months 10 days 10:00 DEC. 1.2006 A LCD monitor (LCD) 2 3 Press [DISPLAY] to change. 100 _ 0001 • When the menu screen appears, the [DISPLAY] button is not activated.
VQT0V40ENG.book 38 ページ 2006年2月27日 月曜日 午後1時19分 Advanced ∫ Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject.
VQT0V40ENG.book 39 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • When you take pictures with the flash or in dark places, the histogram is displayed in orange because the recorded picture and the histogram do not match each other. • The histogram is an approximation in recording mode. • The histogram of a picture may not match in recording mode and playback mode. • The histogram displayed in this camera does not match histograms displayed by picture editing software used in PCs etc.
VQT0V40ENG.book 40 ページ 2006年2月27日 月曜日 午後1時19分 Advanced ∫ Canceling High angle mode or Power LCD mode • If you press and hold [LCD MODE] again for 1 second the screen shown in step 2 is displayed. Select [OFF] to cancel Power LCD mode or High angle mode. • High angle mode is also canceled if you turn the camera off or power save mode is activated. • The brightness of the pictures displayed on the LCD monitor is adjusted when Power LCD mode or High angle mode is activated.
VQT0V40ENG.book 41 ページ 2006年2月27日 月曜日 午後1時19分 Advanced : Forced ON The flash is activated every time regardless of the recording conditions. • Use this when your subject is back-lit or under fluorescent light. ∫ Available flash settings by recording mode The available flash settings depend on the recording mode. (±: Available, —: Not available) : Forced ON/Red-eye reduction¢1 • You can set to Forced ON/Red-eye reduction only when you set [PARTY] (P54) or [CANDLE LIGHT] (P54) in scene mode.
VQT0V40ENG.book 42 ページ 2006年2月27日 月曜日 午後1時19分 Advanced ∫ The available flash range to take pictures The available flash range to take pictures depends on the ISO sensitivity selected. ISO sensitivity AUTO Available flash range Wide 30 cm (0.98 feet) to 3.7 m (12.1 feet) Tele 1 m (3.28 feet) to 2.4 m (7.87 feet) ISO80 Wide 30 cm (0.98 feet) to 1.6 m (5.25 feet) Tele 1 m (3.28 feet) to 1.1 m (3.61 feet) ISO100 Wide 30 cm (0.98 feet) to 1.8 m (5.91 feet) Tele 1 m (3.28 feet) to 1.2 m (3.
VQT0V40ENG.book 43 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • There may be differences in the above shutter speeds in scene mode. – [NIGHT SCENERY] (P53): 8 to 1/2000th – [FIREWORKS] (P55): 1/4th, 1 second – [STARRY SKY] (P55): 15 seconds, 30 seconds, 60 seconds • Do not look directly at the flash at close range when it is activated. • If you bring the flash too close to an object, the object may be distorted or discolored by the heat or lighting from the flash.
VQT0V40ENG.book 44 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Taking Pictures with the Self-timer SCN1 SCN2 1 Press 2 [ ] to select the self-timer mode. 3 : Self-timer set to 10 seconds ; : Self-timer set to 2 seconds ; No display: canceled 2 Press the shutter button halfway to focus and then press it fully to take the picture. 3 CANCEL MENU • A: Press the shutter button halfway to focus. • B: Press the shutter button fully to take the picture.
VQT0V40ENG.book 45 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Compensating the Exposure SCN1 SCN2 1 Press 3 [ ] until [EXPOSURE] appears, compensate the exposure with 2/1. EXPOSURE Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Under exposed SELECT EXIT MENU • You can compensate from [j2 EV] to [i2 EV] in steps of [1/3 EV]. • Select [0 EV] to return to the original exposure.
VQT0V40ENG.book 46 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Taking Pictures using Auto Bracket SCN1 SCN2 In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures. 1 Press 3 [ ] several times until [AUTO BRACKET] appears, set the compensation range of the exposure with 2/1.
VQT0V40ENG.book 47 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Optical Image Stabilizer SCN1 SCN2 This mode detects jitter and compensates for it. 1 Press and hold the optical image stabilizer button A until [STABILIZER] appears. 2 Press 3/4 to select the stabilizer function mode and then press [MENU/SET]. STABILIZER OFF MODE1 MODE2 MENU SELECT SET MENU DEMO. SET MODE1 The stabilizer operates ( ) continuously and can assist during photo composition.
VQT0V40ENG.book 48 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Taking Pictures using Burst Mode SCN1 SCN2 1 Press the burst mode button to switch the burst mode setting. pictures using burst mode, the number of recordable pictures is less than indicated. • In simple mode [ ], the settings become as follows. [ ] appears on the left of the screen. (P28) –[ ENLARGE]: /Max. 3 pictures –[ 4qk6q/10k15cm]/[ /Max.
VQT0V40ENG.book 49 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Taking Close-up Pictures This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of flowers. You can take pictures of a subject as close as 5 cm (0.16 feet) from the lens by rotating the zoom lever upmost to Wide (1k). ∫ Focus range T 2m (6.56 feet) W 40 cm (1.31 feet) T 1m (3.28 feet) W 5 cm (0.16 feet) • We recommend using a tripod and the self-timer (P44) in macro mode.
VQT0V40ENG.book 50 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Scene Mode SCN1 SCN2 When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. • Two frequently used scenes can be set to the mode dials [ ] and [ ].Refer to P51 to 58 for each scene menu. ∫ About the menu screen items • There are 6 menu screens (1/6, 2/6, 3/6, 4/6, 5/6 and 6/6). • You can switch menu screens from any menu item by rotating the zoom lever.
VQT0V40ENG.book 51 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • When you take a picture with a scene mode that is not adequate for the purpose, the hue of the picture may differ from the actual scene. • When you want to change the brightness of the picture to be recorded, compensate the exposure (P45). (However, the exposure cannot be compensated in [STARRY SKY].
VQT0V40ENG.book 52 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • This mode is only suitable when taking pictures outdoors in the daytime. • If a part of the background etc. is a color close to skin color, this part is also smoothed. • This mode may not be effective when there is insufficient brightness. • ISO sensitivity is fixed to [ISO80]. ∫ Technique for Sports mode • This mode is effective when taking pictures during the day in good weather.
VQT0V40ENG.book 53 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • When using the flash, Slow sync./Red-eye reduction [ ] is selected and the flash is activated every time. • The continuous AF setting is disabled. Night scenery mode MENU Press [ SET ] to display the [SCENE MODE] menu and select this mode. (P50) This mode allows you to record the nightscape vividly by reducing the shutter speed. Self portrait mode MENU Press [ SET ] to display the [SCENE MODE] menu and select this mode.
VQT0V40ENG.book 54 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • The available focus range is about 30 cm (0.98 feet) to 70 cm (2.30 feet). • You can take a picture of yourself with audio (P74). If you do this, the self-timer indicator will light up while recording the audio. (P44) • When you select [SELF PORTRAIT], the zoom magnification is automatically moved to Wide (1k). If you rotate the zoom lever, it will become difficult to focus. • The self-timer can only be set to off or 2 seconds (P44).
VQT0V40ENG.book 55 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • We recommend using a tripod and the self-timer (P44) for taking pictures. • The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶] • The flash setting can be set to Slow sync./ Red-eye reduction [ ] or Forced ON/ Red-eye reduction [ ]. Fireworks mode • The setting on the AF assist lamp and continuous AF are disabled. • You cannot set the slow shutter.
VQT0V40ENG.book 56 ページ 2006年2月27日 月曜日 午後1時19分 Advanced ∫ Technique for Starry sky mode • The shutter opens for 15, 30 or 60 seconds. Be sure to use a tripod. We also recommend taking pictures with the self-timer. (P44) • Histograms are always displayed in orange. (P38) • The continuous AF setting is disabled. • The flash setting is fixed to Forced OFF [ ]. • The optical image stabilizer function is fixed to [OFF]. • ISO sensitivity is fixed to [ISO80].
VQT0V40ENG.book 57 ページ 2006年2月27日 月曜日 午後1時19分 Advanced High Sensitivity mode MENU Press [ SET ] to display the [SCENE MODE] menu and select this mode. (P50) The sensitivity is set higher than usual allowing for pictures to be taken with faster shutter speeds. This mode helps minimize the blur of moving subjects in situations with inadequate lighting such as a baby in a dimly lit room. 3 Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied).
VQT0V40ENG.book 58 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • The display style when printing may differ slightly from the display style on the screen. • The date of birth is displayed as [0 month 0 day]. • If the age is not properly displayed, check the clock and birthday settings. • If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday are set. This means the age cannot be displayed even if camera is set to [WITH AGE] after taking the pictures.
VQT0V40ENG.book 59 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Recording which day of the vacation you take the picture 2 Press 4 to select the [SETUP] menu icon [ ] and then press 1. 1/4 SETUP CLOCK SET WORLD TIME SCN1 SCN2 If you set the departure date in advance, you can record which day of the vacation you take the picture. • When you play back a picture, the date on which it was taken is displayed. MONITOR n0 TRAVEL DATE OFF AUTO REVIEW 1SEC.
VQT0V40ENG.book 60 ページ 2006年2月27日 月曜日 午後1時19分 Advanced 7 Take a picture. 3 1ST DAY 10:00 DEC. 2.2006 A: The number of days that have passed since the departure date • The current date and time and which day of the vacation it is are displayed for about 5 seconds at the bottom of the screen if the camera is turned on when the travel date is set, after setting the clock, departure date or travel date, after changing the world time setting and after switching from playback mode to another mode.
VQT0V40ENG.book 61 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Displaying the time at the travel destination (World Time) SCN1 SCN2 If you set your home area and the travel destination area when traveling abroad etc., the local time at the travel destination area can be displayed on the screen and recorded on the pictures taken. • Select [CLOCK SET] to set the current date and time in advance. (P18) 1 Press [MENU/SET] and then press 2. 1/3 REC W.
VQT0V40ENG.book 62 ページ 2006年2月27日 月曜日 午後1時19分 Advanced • If you are setting the home area for the second time etc., the screen returns to the screen shown in step 3 after you press [MENU/SET] to set your home area. Press [MENU/SET] again to close the menu. the home area is displayed on the bottom left of the screen. (Refer to P63 for information about the names of the major cities that are displayed.) 3 Press [MENU/SET] to close the menu.
VQT0V40ENG.
VQT0V40ENG.book 64 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Motion Picture Mode 1 Press the shutter button halfway to focus and then press it fully to start recording. R 20s 5s 2 Press the shutter button fully to stop recording. • If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically. ∫ Changing the settings for the aspect ratio and the picture quality 1 Press [MENU/SET]. 2 Press 3/4 to select [ASPECT RATIO] and then press 1.
VQT0V40ENG.book 65 ページ 2006年2月27日 月曜日 午後1時19分 Advanced If you selected [ shown in step 2 Item 30fps16:9 10fps16:9 ] on the screen Picture size 848k480 pixels fps 30 10 • fps (frames per second); This refers to the number of frames used in 1 second. • You can record smoother motion pictures with 30 fps. • You can record longer motion pictures with 10 fps although the picture quality is lower. • The file size with [10fpsQVGA] is small so it is suitable for e-mails.
VQT0V40ENG.book 66 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Displaying Multiple Screens (Multi Playback) • The recording date and number of the selected picture and the total number of recorded pictures are displayed. • Depending on the recorded picture and the setting, the following icons will appear. –[ ] (Favorites) 1 Rotate the zoom lever towards [ ] [W] to display multiple screens. –[ ] (Motion picture) –[ ] ([BABY1]/[BABY2] in scene mode, age in months, age in years etc.
VQT0V40ENG.book 67 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Displaying pictures by recording date (Calendar playback) You can display pictures by recording date using the calendar playback function. 1 Rotate the zoom lever towards [ ] [W] to display the calendar screen. SUN MON TUE WED THU FRI SAT 1 3 2 4 5 6 7 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 9 T W 4 Press 3/4/2/1 to select a picture and then press [MENU/ SET].
VQT0V40ENG.book 68 ページ 2006年2月27日 月曜日 午後1時19分 Advanced ∫ To stop using the playback zoom Rotate the zoom lever towards [ ] [W] or press [MENU/SET]. Using the Playback Zoom 1 Rotate the zoom lever towards [ ] [T] to enlarge the picture. 2X W 4X CANCEL T DELETE • : 1k>2k>4k>8k>16k • When you rotate the zoom lever towards [ ] [W] after enlarging the picture, the magnification becomes lower. When you rotate the zoom lever towards [ ] [T], the magnification becomes higher.
VQT0V40ENG.book 69 ページ 2006年2月27日 月曜日 午後1時19分 Advanced Playing Back Motion Pictures/Pictures with Audio ∫ Pictures with audio Press 2/1 to select a picture with the audio icon [ ] and then press 4 to play back. • PLAY AUDIO 100 _ 0001 1/3 ∫ Motion pictures Press 2/1 to select a picture with a motion picture icon [ ]/ [ ]/[ ]/[ ]/[ ]/ [ ] and then press 4 to play back. PLAY MOTION PICTURE 100_0001 1/3 25s 10:00 DEC. 1.2006 • The motion picture recording time A is displayed on the screen.
VQT0V40ENG.book 70 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings Menu Settings Using the [REC] Mode Menu 3 Press 1, press 3/4 to select the setting and then press [MENU/ SET]. SCN1 SCN2 Increase the variety of pictures you can take by setting color effect, picture adjustment etc. • Set the mode dial to the desired recording mode. • Menu items differ depending on the mode selected with the mode dial (P5). This page describes how to set [QUALITY] in normal picture mode [ ].
VQT0V40ENG.book 71 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings [W.BALANCE] Adjusting the hue for a more natural picture 5 6 7 8 9 Sunlight White fluorescent light Incandescent light bulb Sunrise and sunset Candlelight MENU Press [ SET ] to display the [REC] mode menu and select the item to set. (P70) This function allows you to reproduce a white color close to real life in pictures recorded under sunlight, halogen lighting etc. in which the white color may appear reddish or bluish.
VQT0V40ENG.book 72 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings 1 Press 3 [ ] several times until [WB ADJUST.] appears and then press 2/1 to adjust the white balance. WB ADJUST. RED SELECT BLUE EXIT MENU • 2 [RED]: Press when the hue is bluish. • 1 [BLUE]: Press when the hue is reddish. • Select [0] to return to the original white balance. 2 Press [MENU/SET] to finish. • You can also press the shutter button halfway to finish. • The white balance icon on the screen turns red or blue.
VQT0V40ENG.book 73 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings • To avoid picture noise, we recommend decreasing the ISO sensitivity or setting [PICT.ADJ.] to [NATURAL]. (P78) • ISO sensitivity cannot be set in scene mode, motion picture mode [ ] and simple mode [ ]. [ASPECT RATIO] Setting the aspect ratio of pictures SCN1 SCN2 MENU Press [ SET ] to display the [REC] mode menu and select the item to set. (P70) By changing the aspect ratio, you can select an angle of view that matches the subject.
VQT0V40ENG.book 74 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings ∫ When the aspect ratio is [ ]. (5M) 2560k1920 pixels (3M EZ) 2048k1536 pixels (2M EZ) 1600k1200 pixels (1M EZ) 1280k960 pixels (0.3M EZ) 640k480 pixels ∫ When the aspect ratio is [ (4.5M) ]. 2560k1712 pixels • Refer to P111 for information about the number of recordable pictures. • The number of recordable pictures depends on the subject.
VQT0V40ENG.book 75 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings [AF MODE] • You cannot take pictures with audio in auto bracket, burst mode or [STARRY SKY] in scene mode. Setting the focus method SCN1 SCN2 MENU [METERING MODE] Deciding the method to measure brightness MENU Press [ SET ] to display the [REC] mode menu and select the item to set. (P70) You can switch to the following metering modes.
VQT0V40ENG.book 76 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings ∫ About 3-area-focusing (High speed) and 1-area-focusing (High speed) • You can focus on the subject more quickly than other AF modes. • The picture may stop moving for a moment before being brought into focus when you press the shutter button halfway. This is not a malfunction. • The AF area displayed on the center of the screen is bigger than usual when using the digital zoom or when taking pictures in dark places. F5.
VQT0V40ENG.book 77 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings [AF ASSIST LAMP] Focusing in low light conditions becomes easier SCN1 SCN2 MENU Press [ SET ] to display the [REC] mode menu and select the item to set. (P70) Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult.
VQT0V40ENG.book 78 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings • When the shutter speed is made slower using [SLOW SHUTTER], jitter is likely to occur. We recommend using a tripod and the self-timer (P44) for taking pictures. • You cannot set the slow shutter in [NIGHT SCENERY], [FIREWORKS] and [STARRY SKY] in scene mode. [COL.EFFECT] Setting color effects for the recorded pictures MENU Press [ SET ] to display the [REC] mode menu and select the item to set.
VQT0V40ENG.book 79 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings 1 Press 3/4 to select [FLIP ANIM.] and then press 1. 4 Press [MENU/SET], press 3/4 to select [CREATE MOTION PICTURE] and then press 1. 3/3 REC SLOW SHUTTER 1/8㧙 D.ZOOM OFF COL.EFFECT PICT.ADJ. OFF MENU SET FLIP ANIM. STANDARD PICTURE CAPTURE FLIP ANIM. EXIT SELECT MENU CREATE MOTION PICTURE DELETE STILL PICTURES 2 Select [PICTURE CAPTURE] and then press 1. FLIP ANIM.
VQT0V40ENG.book 80 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings 7 Press 4 to select [CREATE MOTION PICTURE], press 1 and then create a flip animation. Using the [PLAY] mode menu CREATE MOTION PICTURE FRAME RATE 5fps CREATE MOTION PICTURE SELECT EXIT MENU • The file number appears after creating a flip animation. • Press [MENU/SET] three times to close the menu after creating the flip animation. You can use various functions in playback mode to rotate pictures, set protection for them etc.
VQT0V40ENG.book 81 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings ∫ About the menu screen items • There are 3 menu screens (1/3, 2/3 and 3/3). • You can switch menu screens from any menu item by rotating the zoom lever. • If none of the pictures have [ ] displayed, you cannot select [ ] even if [FAVORITE] is set to [ON]. 2 Press 3 to select [START] and then press [MENU/SET]. (Screen when [ALL] is selected) 1/3 PLAY SLIDE SHOW FAVORITE ROTATE DISP.
VQT0V40ENG.book 82 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings • If you set [AUDIO] to [ON] and then play back a picture with audio, the next picture will be displayed after the audio has finished. • You cannot play back motion pictures and use power save in a slide show. (However, the setting for power save mode is fixed to [10MIN.] while pausing a slide show or playing back a manual slide show.
VQT0V40ENG.book 83 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings [ROTATE DISP.]/[ROTATE] To display the picture rotated MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90° steps. 2 Press 3/4 to select the direction to rotate the picture and then press [MENU/SET].
VQT0V40ENG.book 84 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings established by JEITA [Japan Electronics and Information Technology Industries Association]. • Rotated pictures are displayed without being rotated when they are played back in multi playback. • It may not be possible to rotate pictures that have been recorded with other equipment. MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set.
VQT0V40ENG.book 85 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings 2 Press [MENU/SET] twice to close the menu. ∫ To cancel all settings 1 Press 3 to select [YES] and then press [MENU/SET]. CANCEL ALL DPOF CANCEL ALL DPOF PRINT SETTINGS? YES NO SELECT MENU MENU SET SET 2 Press [MENU/SET] to close the menu. • DPOF print settings on the built-in memory are canceled when a card is not inserted. DPOF print settings on the card are canceled when a card is inserted.
VQT0V40ENG.book 86 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings ∫ Single setting [AUDIO DUB.] 1 Press 2/1 to select the picture and then press 4 to set/cancel. PROTECT THIS 100 _ 0001 1/3 SELECT SET/CANCEL SET EXIT The protect icon [ CANCEL The protect icon [ Adding audio after taking pictures MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) You can add the audio after taking a picture.
VQT0V40ENG.book 87 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings [RESIZE] Making the picture smaller MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) This function is useful if you want to reduce the file size of a picture to attach it to an e-mail or upload it to a website. 1 Press 2/1 to select the picture and then press 4. RESIZE 100 _ 0001 1/3 • When the aspect ratio setting is [ –[ ]/[ ]/[ ]/[ ] • When the aspect ratio setting is [ ].
VQT0V40ENG.book 88 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings 4 Press shutter button. [TRIMMING] Enlarging a picture and trimming it MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) You can enlarge and then clip the important part of the recorded picture. • The message [DELETE ORIGINAL PICTURE?] appears. 5 Press 3/4 to select [YES] or [NO] and then press [MENU/SET]. TRIMMING 1 Press 2/1 to select the picture and then press 4.
VQT0V40ENG.book 89 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings [ASPECT CONV.] Changing the aspect ratio of a 16:9 picture MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) You can convert pictures taken with a [ ] aspect ratio to a [ ] or a [ ] aspect ratio. 1 Press 3/4 to select [ ] or [ ] and then press [MENU/ SET]. PROTECT • Use 3/4 to set the frame position for pictures rotated vertically. • The message [DELETE ORIGINAL PICTURE?] appears.
VQT0V40ENG.book 90 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings 3 Press 3 to select [YES] and then press [MENU/SET]. [COPY] Copying the picture data MENU Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) You can copy recorded picture data from the built-in memory to a card or vice versa. 1 Press 3/4 to select the copy destination and then press [MENU/SET]. (The illustration shows the screen when pictures are copied from the built-in memory to a card.
VQT0V40ENG.book 91 ページ 2006年2月27日 月曜日 午後1時19分 Menu Settings • If you copy picture data from the built-in memory to a card, we recommend using a card which has more free space than the built-in memory (about 13.4 MB). • It may take time to copy the picture data. • Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied. (Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.
VQT0V40ENG.book 92 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment Connecting to other equipment Connecting to a PC SCN1 SCN2 You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] (for Windows®) in the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail.
VQT0V40ENG.book 93 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment • If you set [USB MODE] to [PictBridge (PTP)] and then connect the camera to the PC, messages may appear on the screen of the PC. Select [Cancel] to close the messages and disconnect the camera from the PC. Set [USB MODE] to [PC] again. ∫ Folder Composition Folders are displayed as shown in the following illustration. ≥Built-in memory ≥SD Memory Card ≥MultiMediaCard 100_PANA 1 100_PANA P1000001.
VQT0V40ENG.book 94 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment ∫ Conditions under which a different folder number is used In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number. 1 When the folder just recorded to contains a picture file with the number 999 in it (example: P1000999.JPG).
VQT0V40ENG.book 95 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment Printing the Pictures SCN1 SCN2 By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to print and start printing on the camera’s screen. Set print settings such as the print quality on the printer beforehand. (Read the printer operating instructions.) 2 Connect the camera to a printer via the USB connection cable A (supplied).
VQT0V40ENG.book 96 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection. • To find out more about PictBridge compliant printers, contact your local dealer. ∫ Single picture 1 Press 3 to select [SINGLE PICTURE] and then press [MENU/SET]. ∫ Setting date printing, the number of prints, the paper size and the page layout Select and set each item in step 3.
VQT0V40ENG.book 97 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment • [PAGE LAYOUT] (Layouts that can be set with this unit) Settings on the printer are prioritized. 1 photo/page 1 photo/page 2 photo/page 4 photo/page • An item cannot be selected if the printer does not support the page layout. ∫ DPOF picture • Set the DPOF print setting on the camera in advance. (P84) 1 Press 4 to select [DPOF PICTURE] and then press [MENU/SET].
VQT0V40ENG.book 98 ページ 2006年2月27日 月曜日 午後1時19分 Connecting to other equipment Playing Back Pictures on a TV Screen ∫ Playing back pictures using the AV cable (supplied) • Set the aspect of the TV on the camera. (P23) • Turn the camera and the TV off. DIGITAL AV OUT DC IN 1 Connect the AV cable A (supplied) to the [AV OUT] socket on the camera. • Connect the AV cable with the [ ] mark facing the [1] mark on the [AV OUT] socket. • Hold the AV cable at B and insert straight in or take straight out.
VQT0V40ENG.book 99 ページ 2006年2月27日 月曜日 午後1時19分 Others Others Screen Display 9 Recording state 10 Histogram (P38) A 1 2 3 4 5 11 Travel date (P59) 6 12 Elapsed recording time (P64) 24 23 22 21 3 7 8 9 10 20 19 18 11 17 F2.8 1/25 16 15 5s 12 13 14 25 26 27 ISO100 28 13 Self-timer mode (P44) 14 Current date and time • This is displayed for about 5 seconds when the camera is turned on, after setting the clock and after switching from playback mode to recording mode.
VQT0V40ENG.book 100 ページ 2006年2月27日 月曜日 午後1時19分 Others • This is displayed for about 5 seconds when the camera is turned on, after setting the clock and after switching from playback mode to simple mode. after changing the world time setting and after switching from playback mode to another mode. 31 Age (P57) • This is displayed for about 5 seconds when the camera is turned on in baby mode, after setting the clock or birthday, and after switching from other modes to baby mode.
VQT0V40ENG.book 101 ページ 2006年2月27日 月曜日 午後1時19分 Others In Simple mode (P28) : ENLARGE : 4qk6q/10k15cm : E-MAIL 7 Battery indication (P13) 8 Folder/File number (P93) Built-in memory/Card (P16) 9 Picture number/Total pictures 10 Cable disconnection warning icon (P97) • This is displayed when printing using a printer supporting PictBridge. (Depending on the printer, the icon may not be displayed.
VQT0V40ENG.book 102 ページ 2006年2月27日 月曜日 午後1時19分 Others Do not use the camera near radio transmitters or high-voltage lines. • If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected. Always use the supplied cords and cables. If you use optional accessories, use the cords and the cables supplied with them. Do not extend the cords or the cables. Do not spray the camera with insecticides or volatile chemicals.
VQT0V40ENG.book 103 ページ 2006年2月27日 月曜日 午後1時19分 Others Bring charged spare batteries when going out. • Be aware that the operating time of the battery becomes shorter in low temperature conditions such as at a ski resort. • When you travel, do not forget to bring the battery charger (supplied) so that you can charge the battery in the country that you are travelling in. Dispose of unusable battery. • The battery has a limited life. • Do not throw the battery into fire because it may cause an explosion.
VQT0V40ENG.book 104 ページ 2006年2月27日 月曜日 午後1時19分 Others [NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY IN THE CARD] There is no space left on the built-in memory or the card. • When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full. [SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED] The following pictures cannot be copied.
VQT0V40ENG.book 105 ページ 2006年2月27日 月曜日 午後1時19分 Others [PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV] • The AV cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once. • Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P23) • This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer.
VQT0V40ENG.book 106 ページ 2006年2月27日 月曜日 午後1時19分 Others ∫ Recording 1: The picture cannot be recorded. • Is the mode dial correctly set? • Is there any memory remaining on the built-in memory or the card? – Before recording, delete some pictures. (P35) 2: The recorded picture is whitish. The lens is dirty. • The picture can become whitish if there is dirt e.g. fingerprints on the lens.
VQT0V40ENG.book 107 ページ 2006年2月27日 月曜日 午後1時19分 Others 2: The LCD monitor becomes darker or brighter for a moment. • This phenomenon appears when you press the shutter button halfway to set the aperture value and does not affect the recorded pictures. 3: The LCD monitor flickers indoors. • The LCD monitor may flicker for a few seconds after turning the camera on indoors under fluorescent light. This is not a malfunction. 4: The LCD monitor is too bright or dark. • Adjust the brightness of the screen.
VQT0V40ENG.book 108 ページ 2006年2月27日 月曜日 午後1時19分 Others 3: The folder number and the file number are displayed as [—] and the screen turns black. • Is the picture edited with a PC or recorded with a digital camera from another manufacturer? This may also happen if the battery is removed immediately after recording or if recording with a exhausted battery. – Format the data to delete the pictures mentioned above. (P91) (Formatting irretrievably deletes all data including the other pictures.
VQT0V40ENG.book 109 ページ 2006年2月27日 月曜日 午後1時19分 Others 7: The ends of the pictures are cut at printing. • When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.) • When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends. 8: The picture is not displayed fully on the TV. • Set the aspect of the TV on the camera.
VQT0V40ENG.book 110 ページ 2006年2月27日 Others 10:Colors appear on the picture which were not found in the actual scene. • Depending on the zoom magnification, the picture may have some colored fringes around the subject. This is called chromatic aberration and may be more visible when recording distant subjects. However this is not a malfunction. 11: The file numbers are not recorded consecutively.
VQT0V40ENG.book 111 ページ 2006年2月27日 月曜日 午後1時19分 Others Others Number of recordable pictures and available recording time • The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) • The number of recordable pictures varies depending on the subjects. ∫ Number of recordable pictures Aspect ratio (5M): (2560k1920 pixels) Picture size Quality (2M EZ): (1600k1200 pixels) / Built-in Memory (Approx.
VQT0V40ENG.book 112 ページ 2006年2月27日 月曜日 午後1時19分 Others Aspect ratio (2.5M EZ): (2048k1360 pixels) Picture size Quality (2M EZ): (1920k1080 pixels) / Built-in Memory (Approx. 13.4 MB) Card (3.
VQT0V40ENG.book 113 ページ 2006年2月27日 月曜日 午後1時19分 Others Specifications Digital Camera: Power Source: Power Consumption: Information for your safety DC 5.1 V 1.6 W (When recording) 0.8 W (When playing back) Camera effective pixels: 5,000,000 pixels Image sensor: 1/2.5q CCD, total pixel number 6,370,000 pixels, Primary color filter Lens: Optical 10k zoom, fl5.2 mm to 52 mm (35 mm film camera equivalent: 35 mm to 350 mm)/F2.8 to F4.2 Digital zoom: Max. 4k Extra optical zoom: Max. 12.
VQT0V40ENG.book 114 ページ 2006年2月27日 月曜日 午後1時19分 Others Recording media: Picture size Still picture: Motion pictures: Quality: Recording file format Still Picture: Picture with audio: Motion pictures: Interface Digital: Analog video/audio: Built-in Memory (Approx. 13.
VQT0V40ENG.
VQT0V40ENG.book 116 ページ 2006年2月27日 月曜日 午後1時19分 Others Digital Camera Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Digital Camera Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
VQT0V40ENG.book 117 ページ 2006年2月27日 月曜日 午後1時19分 Others Request for Service Notice (For USA Only) Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. include your proof of purchase. Request for Service Notice: • Please (Failure to do so will delay your repair.) (USA Only) • To further speed your repair, please provide an explanation of what wrong with the unit and any symptom it is exhibiting.
VQT0V40ENG.book 118 ページ 2006年2月27日 月曜日 午後1時19分 Others Limited Warranty (For USA Only) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
VQT0V40ENG.book 119 ページ 2006年2月27日 月曜日 午後1時19分 Others Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-272-7033. For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
VQT0V40ENG.book 120 ページ 2006年2月27日 月曜日 午後1時19分 Others Customer Services Directory (For USA Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-272-7033, Monday-Friday 8:30am-8pm EST. Web Site: http://www.panasonic.com/consumersupport You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.
VQT0V40ENG.book 121 ページ 2006年2月27日 月曜日 午後1時19分 Others Others Index E A AC Adaptor ...................................... 92, 95 Access Indication ................................... 16 Aerial Photo Mode ................................. 56 AF Assist Lamp ...................................... 77 AF Mode ................................................ 75 AF/AE Lock ............................................ 26 Aspect Ratio .......................................... 73 Aspect Ratio Conversion .....
VQT0V40ENG.book 122 ページ 2006年2月27日 月曜日 午後1時19分 Others N S Night Portrait Mode ................................ 52 Night Scenery Mode .............................. 53 Normal Recording .................................. 25 NO.RESET ............................................ 22 NTSC ..................................................... 23 Number of Prints .............................. 84, 96 Number of Recordable Pictures ..... 13, 111 Scene Menu ...........................................
VQT0V40ENG.book 123 ページ 2006年2月27日 月曜日 午後1時19分 Others Others 3 Encienda la cámara para tomar las imágenes. • Ajuste el reloj. SCN1 2 Ésta es una visión de conjunto que trata del procedimiento para grabar y reproducir las imágenes con la cámara. 1 Cargue la batería. SC N Spanish Quick Use Guide/Guía rápida en español OFF ON 1 Ajuste el disco del modo a [ ]. 2 Pulse el botón del obturador para tomar las imágenes. SCN2 4 Reproduzca las imágenes.
VQT0V40ENG.book 124 ページ 2006年2月27日 月曜日 午後1時19分 QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license. Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc.