Operating Instructions for advanced features Digital Camera Model No. DMC-TZ57 DMC-TZ58 Please read these instructions carefully before using this product, and save this manual for future use.
Contents Before Use Care of the camera ...................................................................................................... 6 Standard Accessories................................................................................................. 7 Names and Functions of Main Parts.......................................................................... 8 Preparation Charging the Battery..................................................................................................
• Extra Optical Zoom (EZ) ..................................................................................... 60 • Intelligent Zoom .................................................................................................. 60 • Digital Zoom........................................................................................................ 61 Taking Pictures Using the Built-in Flash.................................................................
• Registering Personal Menu Settings (Registering custom settings)................... 88 • Recording using registered custom set .............................................................. 89 Entering Text.............................................................................................................. 90 Using the [Rec] Menu................................................................................................ 91 • [Picture Size]......................................................
• Taking pictures via a smartphone/tablet (remote recording)............................. 133 • Playing back pictures in the camera ................................................................. 133 • Saving images stored in the camera ................................................................ 134 • Sending location information to the camera from a smartphone/tablet ............ 135 • Sending images to a smartphone/tablet by controlling the camera .................. 136 When sending images to PC ..
Before Use Care of the camera Do not subject to strong vibration, shock, or pressure. • The lens, monitor, or external case may be damaged if used in the following conditions. It may also malfunction or image may not be recorded if you: – Drop or hit the camera. – Sit down with the camera in your trousers pocket or forcefully insert it into a full or tight bag, etc. – Attach any items such as accessories to the strap attached to the camera. – Press hard on the lens or the monitor.
Before Use Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Operating Instructions”. • Battery Pack is indicated as battery pack or battery in the text. • SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text. • The card is optional.
Before Use Names and Functions of Main Parts 1 2 3 4 Flash (P62) Self-timer indicator (P67) AF Assist Lamp (P102) Lens (P6, 183) Speaker • Be careful not to cover the speaker with your 1 2 3 4 5 finger. Doing so may make sound difficult to hear. 5 Lens barrier 6 Monitor (P58, 165, 183) • Peel off the protective film before use. [EXPOSURE] button (P70, 71, 72) Charging lamp (P13) Wi-Fi® connection lamp (P126) Motion picture button (P34) [(] (Playback) button (P37) [MENU/SET] button (P41) [DISP.
Before Use 15 Strap eyelet (P24) • To prevent dropping, be sure to attach the 15 supplied strap and fit it to your wrist. 16 16 Lens barrel 17 [HDMI] socket (P155) • Do not connect with any cable other than an 17 18 HDMI micro cable. Doing so may cause malfunction. 18 [AV OUT/DIGITAL] socket (P13, 156, 158, 160) • This socket is also used when charging the battery. 19 Microphone • Be careful not to cover the microphone with 19 20 21 your finger.
Before Use Monitor You can adjust the angle of the monitor. 1 When closing 2 1 Flip up the bottom of the monitor lightly to open. 2 Adjust the angle of the monitor. • Be careful not to catch your finger, etc. in the monitor. • When rotating the monitor, be careful not to apply too much force or drop the camera. This may cause scratches and malfunctions. • When not using this unit, close the monitor completely back to the original position.
Preparation Charging the Battery Use the dedicated AC adaptor (supplied), USB connection cable (supplied) and battery. • The battery is not charged when the camera is shipped. Charge the battery before use. • Charge the battery only when it is inserted in the camera.
Preparation Inserting the Battery 1 Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Being careful about the battery orientation, securely insert it all the way in, and then check that it is locked by the lever A. To remove the battery, move the lever A in the direction of the arrow. 3 1: Close the card/battery door.
Preparation Charging • Charge the battery in areas with an ambient temperature, between 10 oC and 30 oC (50 oF and 86 oF) (same as the battery temperature), is recommended. Insert the battery into this unit. Check that this unit is turned off.
Preparation ∫ About the charging lamp Lit red: Off: Charging. Charging has completed. (When charging is complete, disconnect the camera from the power outlet or computer.) Blinking red: Charging error. (Refer to P170 for details.) ∫ Charging time When using the AC adaptor (supplied) Charging time Approx. 210 min • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.
Preparation • Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated. • Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional). • Do not use any other AC adaptors except the supplied one. • Do not use a USB extension cable.
Preparation Approximate operating time and number of recordable pictures ∫ Recording still pictures Number of recordable pictures Approx. 350 pictures Recording time Approx. 180 min By CIPA standard in Programme AE Mode Recording conditions by CIPA standard • CIPA is an abbreviation of [Camera & Imaging Products Association]. • Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when monitor is on. • Using a Panasonic SD Memory Card. • Using the supplied battery.
Preparation ∫ Playback Playback time Approx. 270 min • The operating times and number of recordable pictures will differ according to the environment and the operating conditions. For example, in the following cases, the operating times will shorten and the number of recordable pictures is reduced: – In low-temperature environments, such as on ski slopes. – When using [Monitor Luminance]. – When operations such as flash and zoom are used repeatedly.
Preparation Inserting and Removing the Card (optional) • Check that this unit is turned off. • We recommend using a Panasonic card. 1 2 Slide the release lever in the direction of the arrow and open the card/battery door. Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it. To remove the card, push the card until it clicks, then pull the card out upright. A: Do not touch the connection terminals of the card.
Preparation About the Built-in Memory/the Card The following operations can be performed using this unit: When a card has not been inserted Pictures can be recorded on the built-in memory and played back. When a card has been inserted Pictures can be recorded on the card and played back.
Preparation • During access (image writing, reading and deleting, formatting etc.), do not turn this unit off, remove the battery, card or disconnect the AC adaptor (supplied). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again.
Preparation Approximate number of recordable pictures and available recording time ∫ About the display of the number of recordable pictures and available recording time • Switch the display (number of recordable pictures, Number of Available recording available recording time, etc.) by pressing [DISP.]. recordable pictures time (P58) • The number of recordable pictures and the available R1m10s 5 recording time are an approximation. (These vary depending on the recording conditions and the type of card.
Preparation Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Press camera [ON/OFF] button. • If the language select screen is not displayed, proceed to step 4. 2 3 4 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. Press [MENU/SET]. Please set the clock Clock Set 5 Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set.
Preparation Changing the Clock Setting Select [Clock Set] on the [Setup] menu and then press [MENU/SET]. (P41) • The clock can be reset as shown in steps 5 and 6. • The clock setting is maintained for about 14 days using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 2 hours to charge the built-in battery.
Preparation Tips for taking good pictures Fit the strap and hold the camera carefully Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Do not swing around or pull forcefully on the unit with the strap attached. The strap may break. • Be careful not to move the camera when you press the shutter button. • Be careful not to put your fingers on the flash, AF assist lamp, microphone, speaker or lens etc.
Basic Selecting the Recording Mode Switching the mode by rotating the mode dial. • Rotate the mode dial slowly to select the desired mode. ∫ List of Recording Modes ¦ Intelligent Auto Mode (P26) The subjects are recorded using settings automatically selected by the camera. Programme AE Mode (P31) The subjects are recorded using your own settings. Aperture-Priority AE Mode (P70) The shutter speed is automatically determined by the aperture value you set.
Basic Taking pictures using the automatic function (Intelligent Auto Mode) Recording Mode: The camera will set the most appropriate settings to match the subject and the recording conditions so we recommend this mode for beginners or those who want to leave the settings to the camera and take pictures easily. • The following functions are activated automatically. – Scene Detection – Backlight Compensation – Intelligent ISO sensitivity control – Auto White Balance – Face Detection – [i.Exposure] – [i.
Basic 2 Press the shutter button halfway to focus. A • The focus indication A (green) lights when the subject is focused. • The AF area B is displayed around the subject’s face by the Face Detection function. In other cases, it is displayed at the point on the subject which is in focus. • The minimal distance (how close you can be to the subject) will change depending on the zoom factor. Please check with the recordable range display on the screen.
Basic Scene Detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its colour changes to the usual red. When taking pictures [i-Portrait] [i-Scenery] [i-Macro] [i-Night Portrait]¢1 [i-Night Scenery] [iHandheld Night Shot]¢2 [i-Sunset] ¢1 Only displayed when the flash is set to [ ]. ¢2 Only displayed when [iHandheld Night Shot] is set to [ON].
Basic Changing the settings Following menus can be set. Menu Item ¢ ¢ [Rec] [Picture Size] /[Burst Shooting] /[Motion Deblur]/[iHandheld Night Shot]/[iHDR]/[Self Shot] [Motion Picture] [Rec Quality] [Setup] [Online Manual]/[Clock Set]/[World Time]/[Airplane Mode]/[Beep]¢/ [Language] • Menu items other than those listed above are not displayed, but you can set them in other Recording Modes.
Basic Menus specific to Intelligent Auto Mode ∫ [Motion Deblur] When [Motion Deblur] is set to [ON], [ ] is displayed on the recording screen. The camera automatically sets an optimal shutter speed according to the motion of the subject to reduce blur on the subject. • It is initially set to [ON] on the camera.
Basic Taking Pictures with Your Favourite Settings (Programme AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 Set the mode dial to [ 2 Aim the AF area at the point you want to focus on. 3 Press the shutter button halfway to focus. ].
Basic Focusing A Aim the AF area at the subject, and then press the shutter button halfway. B 100 Focus When the subject is focused Focus indication A F3.3 1/60 When the subject is not focused On Blinks AF area B White>Green White>Red Sound Beeps 2 times Beeps 4 times • The AF area may be displayed larger for certain zoom magnifications and in dark places. ∫ About focus range The focus range is displayed when operating the zoom.
Basic ∫ When the subject is not in focus (such as when it is not in the centre of the composition of the picture you want to take) 1 Aim the AF area at the subject, and press the shutter button half way to fix the focus and exposure. 2 Press and hold the shutter button half way while moving the camera as you compose the picture. • You can repeatedly retry the actions in step 1 before pressing the shutter button fully.
Basic Recording Motion Pictures Applicable modes: 1 Start recording by pressing the motion picture button. A Available recording time B Elapsed recording time • You can record motion pictures fitting each Recording Mode. • Release the motion picture button right after you press it. • The recording state indicator (red) C will flash while recording motion pictures. • For the setting of [Rec Quality], refer to P105. A C R1m07s 3s B 2 Stop the recording by pressing the motion picture button again.
Basic • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction. • The screen may be blacked out momentarily, or the unit may record noise due to static electricity or electromagnetic waves etc. depending on the environment of the motion picture recording. • Even if the aspect ratio setting is the same in still pictures and motion pictures, the angle of view may change at the start of the motion picture recording.
Basic Recording still pictures while recording motion pictures Still pictures can be recorded even while recording a motion picture. (Simultaneous recording) During motion picture recording, press the shutter button fully to record a still picture. • The picture is saved with the following conditions. Recording quality setting Picture size [FHD]/[HD] 3.5 M (16:9) • You can record up to 2 pictures per motion picture recording.
Basic Playing Back 1 Press [(]. 2 Press 2/1 to select pictures. A A File number B Picture number • If you press and hold 2/1, you can play back the pictures in succession. • Speed of picture Forwarding/Rewinding changes depending on the playback status. ∫ Playing Back Motion Pictures Press 2/1 to select a picture with a Motion Picture icon (such as [ ]), and then press 3 to play back.
Basic • When the camera is turned off, press and hold [(]. If you turn it on this way, the playback screen will be displayed automatically. (If too many images are stored in the card, it may take a while for the camera to turn on.) • This camera complies with the DCF standard “Design rule for Camera File system” established by JEITA “Japan Electronics and Information Technology Industries Association” and with Exif “Exchangeable Image File Format”.
Basic Creating Still Pictures from a Motion Picture You can create a single still picture from a recorded motion picture. 1 2 Press 3 to pause motion picture playback. Press [MENU/SET]. • Confirmation screen is displayed. It is executed when [Yes] is selected. • Still pictures will be saved with the following settings: [Picture Size] 2M (16:9) [Quality] › • Still pictures created from a motion picture may be coarser than with normal picture quality.
Basic Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures on the built-in memory or the card that are being played back will be deleted. • Pictures that are not in the DCF standard or those that are protected cannot be deleted. To delete a single picture Select the picture to be deleted, and then press [ ]. • Confirmation screen is displayed. Picture is deleted by selecting [Yes]. To delete multiple pictures (up to 50) or all the pictures 1 2 Press [ ].
Basic Setting the Menu The camera comes with menus that allow you to choose the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [Setup] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera.
Basic 3 Press 3/4 to select the menu item and then press [MENU/SET]. A Menu screen page • It will switch to the next page when you reach the bottom. (It will also switch by rotating the zoom lever) 4 Press 3/4 to select the setting and then press [MENU/SET]. • Depending on the menu item, its setting may not A 2/4 Rec AF Mode Metering Mode i.Exposure OFF i.
Basic Using the Quick Menu By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. 1 2 Press [Q.MENU] when recording. Press 3/4/2/1 to select the menu item and the setting and then press [MENU/ SET] to close the menu.
Basic About the Setup Menu For details on how to select the [Setup] menu settings, refer to P41. • [Clock Set], [Economy] and [Auto Review] are important items. Check their settings before using them. • In Intelligent Auto Mode, only [Online Manual], [Clock Set], [World Time], [Airplane Mode], [Beep]¢, [Language] can be set. ¢ Available settings are different from other Recording Modes. [Online Manual] U [Clock Set] [URL display]/[USB connection]/[QR Code display] Setting Date/Time.
Basic Restricts Wi-Fi settings. [ON]: Wi-Fi functions cannot be used. [Airplane Mode] [OFF] • When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to [ON], and turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with gauges. This allows you to set the beep and shutter sound. r [Beep Level]: [t] r [Beep] ([Low]) [ [u] ([High]) [ ] ([High]) [s] [ ] ([Off]) [ [Shutter Tone]: 1 ]/[ 2 ]/[ 3 ] [ [Cust.Set Mem.] [Shutter Vol.
Basic These menu settings make it easier to see the monitor when you are in bright places. [Monitor Luminance] [„] ([Auto Power Monitor])¢: The brightness is adjusted automatically depending on how bright it is around the camera. […] ([Power Monitor]): The monitor becomes brighter and easier to see even when taking pictures outdoors. [OFF] ¢ Can be set only when Recording Mode is set.
Basic [Video Rec Area] Angle of view for motion picture recording can be checked. [ON]/[OFF] • Motion picture recording area display is only an approximation. • Recording area display may disappear when zooming to Tele depending on the picture size setting. • The setting is fixed to [OFF] in the following case. – Intelligent Auto Mode [Zoom Resume] This allows you to save the zoom position when you turn off the camera. [ON]/[OFF] • The setting is fixed to [OFF] in the following case.
Basic Set the length of time that the picture is displayed after taking the still picture. [1SEC] o [Auto Review] [2SEC] [HOLD]: The pictures are displayed until one of the buttons is pressed. [OFF] • [Auto Review] is activated regardless of its setting in the following cases. – When using Auto Bracket – When using [Burst Shooting]. • The setting is fixed to [2SEC] in the following case. – Intelligent Auto Mode • [Auto Review] does not work when recording motion pictures.
Basic Set to match the colour television system in each country or the type of TV. | [TV Connection] [|] ([Video Out]): [NTSC]: Video output is set to NTSC system. [PAL]: Video output is set to PAL system. • This will operate when the AV cable (optional) or HDMI micro cable is connected. [ ] ([TV Aspect]): [W]: When connecting to a 16:9 screen TV. [X]: When connecting to a 4:3 screen TV. • This will work when the AV cable (optional) is connected.
Basic [Format] The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting. • Do not turn the camera off during formatting. • If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card. • If the card has been formatted on a PC or other equipment, format it on the camera again. • It may take longer to format the built-in memory than the card.
Recording Taking Pictures of Yourself ([Self Shot]) Applicable modes: If you rotate the monitor, Self Shot Mode is activated. You can easily take pictures of yourself while looking at the screen. • When [Self Shot] (P104) in [Rec] menu is set to [OFF], even if you rotate the monitor, the camera will not be set to Self Shot Mode. (It is set to [ON] at the time of purchase.) In Self Shot Mode... • Deciding on a composition is easier because recording is performed while looking at the screen.
Recording 2 Press [MENU/SET] to set the soft skin effect, the number of pictures to be taken, and other details. (P53) M 1SLF • Operate the buttons on the back of the unit while looking at the screen. Be careful not to operate the wrong buttons and not to drop the camera. • Press 3/4 to select a setting, press 2/1 to select an option, and press [MENU/SET]. 3 Decide on your poses while looking at the monitor. • The AF area is displayed around the subject’s face by the Face Detection function.
Recording Recording settings in Self Shot Mode When you press [MENU/SET] in step 2, you can change the following settings. • You can also change the [Slimming Mode] setting in [Self Shot] in the [Rec] menu. (P54) Settings ([Soft Skin]) Description of settings Makes people’s faces look brighter and their skin tones look softer. ] ([Low])/[ ] ([Medium])/[ ] ([High]) [ ] ([OFF])/[ Blurs the background. The in-focus portion guide is displayed on the screen.
Recording • When the [Soft Skin] is set – The smoothing effect is applied to the part that has a similar tone to the complexion of a subject, as well. – This mode may not be effective under insufficient lighting. • When a setting other than [OFF] is selected for [Defocusing], display of the recording screen will be delayed more than usual.
Recording ∫ [Wink detector] When the camera detects a wink using the Face Detection function, it counts down from three and takes a picture. 1 Check that a yellow frame is displayed on the face of the person who will wink. • Winks of the people who are not indicated with the yellow frame will not be detected. 2 Wink at the camera. • Close the other eye until a countdown starts. • When the wink is detected, a countdown starts. A picture will be taken when the countdown is over.
Recording Taking panorama pictures in Self Shot Mode You can also take panorama pictures in Self Shot Mode. By recording with Panorama Shot Mode, you can enjoy a variety of self-portraits, such as those with your friends or those incorporating a wide background. • For information on taking pictures in Panorama Shot Mode, please also refer to P73 “Taking panorama pictures (Panorama Shot Mode)”. 1 2 Set the mode dial to [ ]. Press 3/4 to select the recording direction and then press [MENU/SET].
Recording ∫ Technique for Panorama Shot Mode Swivel the camera around its centre when moving it in the recording direction. Hold the camera with both hands, taking care not to shake it. • Swivel the camera at a speed of about 2 seconds per quarter Example: When you have selected [ ] in step 2 revolution. • If the camera shakes too much, pictures may not be able to be recorded, or the recorded panorama picture may become narrower (smaller).
Recording About the Monitor Press [DISP.] to change. • During motion picture playback, panorama playback or a slide show, you can only select “Normal Display” or “No Display”. In Recording Mode Normal display¢1 Normal display¢1 5 R1m10s 1 2 No display Guidelines¢1, 2 1 Number of recordable pictures 2 Available recording time In Playback Mode Normal display 100-0001 1/5 Display with recording information¢1 100-0001 No display 1/5 AWB 10:00 1.DEC.2015 Retouch 100 F3.
Recording Using the Zoom Applicable modes: You can zoom in to make people and objects appear closer or zoom out to record landscapes in wide angle. To make subjects appear further away use (Wide) Rotate the zoom lever towards Wide. To make subjects appear closer use (Tele) Rotate the zoom lever towards Tele. ∫ Screen display Example of display when Extra Optical Zoom (EZ), Intelligent Zoom and Digital Zoom are used together.
Recording Extra Optical Zoom (EZ) This function works when any of the picture sizes (P91) indicated with is selected. You can zoom in further than you can with the Optical Zoom without deteriorating the image quality. Maximum magnification: 45k (This includes the optical zoom magnification. The magnification level differs depending on [Picture Size] setting.) • “EZ” is an abbreviation of “Extra Optical Zoom”.
Recording Digital Zoom This function works when [Digital Zoom] (P100) in the [Rec] menu is set to [ON]. (DMC-TZ57) Although the image quality deteriorates every time you zoom in further, you can zoom in up to four times the original zoom magnification. (DMC-TZ58) Although the image quality deteriorates every time you zoom in further, you can zoom in up to twice the original zoom magnification. • (DMC-TZ57) When using the [i.Zoom], the maximum magnification of the Digital Zoom is limited to 2k.
Recording Taking Pictures Using the Built-in Flash Applicable modes: Flash Do not cover it with your fingers or other objects. Switching to the appropriate flash setting Set the flash to match the recording. 1 Press 1 [‰].
Recording 2 Press 3/4 to select the setting and then press [MENU/SET]. Settings ([Auto]) ([iAuto])¢1 [‡] [ ] [ ] ([Auto/Red-Eye])¢2 [‰] [ [Œ] ([Forced Flash On]) ] ([Slow Sync./ Red-Eye])¢2 ([Forced Flash Off]) Description of settings The flash is automatically activated when the recording conditions make it necessary. The flash is automatically activated when the recording conditions make it necessary.
Recording ∫ Available Flash Settings in Recording Mode The available flash settings depend on the Recording Mode. (±: Available, —: Not available, ¥: Scene Mode initial setting) ‡ ‰ ±¢ — — / ± ± / ± ± ± *+:; ,/ ï5 . 1í9 Œ — ± ± ± ± ± — ± ¥ ± — ± — — — — ¥ ¥ — ± — ± — — — ¥ ± ± — ± — ¥ ¢ [ ] is displayed. • When [ ] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of subject and brightness. • When [ ], [ ] is set, [Red-Eye Removal] is enabled.
Recording ∫ The available flash range (approximation) [AUTO] in [Sensitivity] Wide Tele 0.6 m (2.0 feet) to 6.0 m (20 feet) 1.0 m (3.3 feet) to 3.1 m (10 feet) ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) Flash setting Shutter speed (Sec.) ‡ 1 or 1/8 to 1/2000¢ 1/60 to 1/2000 ‰ Œ ¢ The shutter speed changes depending on the [Stabilizer] setting. The shutter speed becomes a maximum of 1 second in the following cases.
Recording Taking Close-up Pictures ([AF Macro]/[Macro Zoom]) Applicable modes: This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of flowers. 1 Press 4 [#]. 2 Press 3/4 to select the item and then press [MENU/SET]. Item Description of settings You can take pictures of a subject as close as 3 cm (0.098 feet) [ ] ([AF Macro]) from the lens by rotating the zoom lever upmost to Wide (1k).
Recording Taking Pictures with the Self-timer Applicable modes: 1 Press 2 [ë]. 2 Press 3/4 to select the setting and then press [MENU/SET]. [ ] Settings ([10sec.]) [ ] ([2sec.]) Description of settings Picture is taken 10 seconds after shutter is pressed. Picture is taken 2 seconds after shutter is pressed. • When using a tripod, etc., this setting is a convenient way to avoid the jitter caused by pressing the shutter button.
Recording Compensating the Exposure Applicable modes: Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Underexposed Properly exposed Compensate the exposure towards positive. 1 2 Overexposed Compensate the exposure towards negative. Press 3 [È] to display [Exposure Comp.]. Press 2/1 to compensate the exposure and then press [MENU/SET]. • The exposure compensation value appears on the screen.
Recording Taking Pictures Using Auto Bracket Applicable modes: In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. With Auto Bracket d1 EV 1 2 1st picture 2nd picture 3rd picture d0 EV j1 EV i1 EV Press 3 [È] repeatedly until [Auto Bracket] is displayed. Press 2/1 to set the compensation range of the exposure and then press [MENU/SET]. • When you do not use Auto Bracket, select [OFF] (d0).
Recording Taking Pictures by Specifying the Aperture/ Shutter Speed Recording Mode: Aperture-Priority AE Mode Set the aperture value to a higher number when you want a sharp focus background. Set the aperture value to a lower number when you want a soft focus background. 1 2 3 Set the mode dial to [ ]. Press [EXPOSURE]. Press 2/1 to set the aperture value. A Aperture Value 4 Press [EXPOSURE]. F 3.3 A • The brightness of the monitor and the recorded pictures may differ.
Recording Shutter-Priority AE Mode Set with a faster shutter speed when you want to take a sharp picture of a fast moving subject. Set to a slower shutter speed when you want to create a trail effect. 1 2 3 Set the mode dial to [ ]. Press [EXPOSURE]. Press 3/4 to set the shutter speed. A Shutter Speed 4 1/30 Press [EXPOSURE]. A • The brightness of the monitor and the recorded pictures may differ. Check the pictures on the playback screen.
Recording Manual Exposure Mode Determine the exposure by manually setting the aperture value and the shutter speed. 1 2 3 Set the mode dial to [ ]. Press [EXPOSURE]. Press 3/4/2/1 to set the aperture and shutter speed. 2/1: Aperture Value A 3/4: Shutter Speed B 4 Press [EXPOSURE]. F 3.
Recording Taking panorama pictures (Panorama Shot Mode) Recording Mode: Pictures are recorded continuously while moving the camera horizontally or vertically, and are combined to make a single panorama picture. This mode allows you to add any of 13 types of effects before recording. 1 2 3 Set the mode dial to [ ]. Press 3/4 to select the recording direction and then press [MENU/SET]. Press 3/4 to select image effects and then press [MENU/SET].
Recording 6 Press the shutter button fully and record a picture while moving the camera in a small circle in the direction selected in Step 2. Recording from left to right A Trace a half-circle with the camera, taking about 4 seconds. • Move the camera at a constant speed. Pictures may not be able to be recorded properly if the camera is moved too fast or slow. A Recording direction and panning (Guide) • If the camera is not panned enough (1/4 or less of a circle), the recording may not be successful.
Recording • The zoom position is fixed to Wide. • [Stabilizer] is fixed to [OFF]. • The focus, White Balance, and exposure are fixed at the optimum values for the first picture. As a result, if the focus or brightness changes substantially during recording, the entire panorama picture may not be recorded at the suitable focus or brightness. • White Balance is fixed to [AWB] while an image effect is applied.
Recording Taking pictures that match the scene being recorded (Scene Mode) Recording Mode: You can select any of 16 types of Scene Modes according to the subject and scene. 1 2 Set the mode dial to [ ]. Press 3/4/2/1 to select the Scene Mode and then press [MENU/SET]. Scene Mode 1 2 Baby1 Suitable for taking pictures of your Cancel Select Set • To change the Scene Mode, press [MENU/SET], select [Scene Mode] using 3/4/2/1, and then press [MENU/SET].
Recording [Portrait] When taking pictures of people outdoors during the daytime, this mode allows you to improve the appearance and make their skin tones look healthier. ∫ Technique for Portrait Mode To make this mode more effective: 1 Rotate the zoom lever as far as possible to Tele. 2 Move close to the subject to make this mode more effective. [Soft Skin] When taking pictures of people outdoors during the daytime, this mode enables the texture of their skin to appear even softer than with [Portrait].
Recording [Night Portrait] This allows you to take pictures of a person and the background with near real-life brightness. • Use the flash. (You can set to [ ].) • Ask the subject not to move while taking a picture. • We recommend using a tripod and the Self-timer for taking pictures. • Shutter speed may slow down up to 4 seconds. • Noise may become visible when you take pictures in dark places. [Night Scenery] This allows you to take vivid pictures of the nightscape.
Recording [HDR] You can combine several pictures with different levels of exposure into a single picture with rich gradation. You can minimise the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. ∫ What Is HDR? HDR stands for High Dynamic Range and refers to a technique for expressing a wide contrast range. • Do not move the camera during the continuous shooting after pressing the shutter button.
Recording [Baby1]/[Baby2] This takes pictures of a baby with a healthy complexion. It is possible to set different birthdays and names for [Baby1] and [Baby2]. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [Text Stamp] (P116). ∫ Birthday/Name setting Press 3/4 to select [Age] or [Name] and then press [MENU/SET]. Press 3/4 to select [SET] and then press [MENU/SET]. Enter the birthday or name.
Recording [High Sens.] This mode minimises the jitter of the subjects, and enables you to take pictures of these subjects in dimly lit rooms. ∫ Picture Size Select the picture size of 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1). [Starry Sky] This mode allows you to take vivid pictures of a starry sky or a dark subject. ∫ Setting the shutter speed Select a shutter speed of [15 sec.] or [30 sec.]. • Press the shutter button fully to display the countdown screen.
Recording Taking Pictures with different image effects (Creative Control Mode) Recording Mode: This mode allows you to add any of 15 types of effects before recording. You can set the effects to add by selecting example images and checking them on the screen. 1 2 Set the mode dial to [ ]. Press 3/4 to select image effects and then press [MENU/SET]. A • The image effect of the selected example image will be applied in a preview display A.
Recording For details on how to select the “Creative Control Mode” settings, refer to P82. ¢ These pictures are examples to show the effect. [Expressive] This effect emphasises the colour to make a pop art picture. [Retro] This effect gives a faded image. [Old Days] This effect adds a bright, soft and nostalgic feel to the overall image. [High Key] This effect adds a bright, airy and soft feel to the overall image.
Recording [Low Key] This effect adds a dark and relaxing feel to the overall image and enhances bright parts. [Sepia] This effect creates a sepia image. [Dynamic Monochrome] This effect gives a higher contrast to create an impressive black and white picture. [Impressive Art] This effect gives your photo a dramatic contrast look. • If you select this effect with Panorama Shot Mode, seams between pictures may become noticeable.
Recording [High Dynamic] This effect produces the optimum brightness for both dark and bright parts. [Cross Process] This effect gives your photo a dramatic colour look. Items that can be set Colour Green tone/Blue tone/Yellow tone/Red tone • Press 2/1 to select the colour to enhance, and press [MENU/SET]. [Toy Effect] This effect reduces peripheral brightness to give the impression of a toy camera.
Recording [Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama. Items that can be set Direction of the blur Horizontal/Vertical • Press 2/1 to select the direction of the blur, and press [MENU/SET]. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are being dropped during motion picture recording. • No sound is recorded in motion pictures.
Recording [Star Filter] This effect transforms pin-points of light into a star effect. [One Point Color] This effect leaves one selected colour to emphasise impressiveness. ∫ Set the colour to leave in 1 Fit the colour you want to leave in the frame at the centre of the screen, and then press [MENU/ SET]. • You can set the colour again by 2 Check the colour you have set, and then press [MENU/SET]. • The set colour is memorised even if pressing [DISP.]. the camera is turned off.
Recording Taking Pictures in Custom Mode Recording Mode: You can register the current camera settings as custom settings. If you then record in Custom Mode, you can use the registered settings. • Initial setting of the Programme AE Mode is registered as the custom settings initially. Registering Personal Menu Settings (Registering custom settings) If you want to take pictures that have the same settings, you can register up to four items of the current camera settings to [Cust.Set Mem.].
Recording Recording using registered custom set You can easily call up the settings you have registered using [Cust.Set Mem.]. (When calling up a custom set registered for [ Set the mode dial to [ ]. • The custom set registered for [ ] is called up. (When calling up a custom set registered for [ 1 2 ]) Set the mode dial to [ ]/[ ]/[ ]) ]. Press 3/4 to select the custom set, and press [MENU/SET]. • Saving of the selected custom settings is displayed on the screen.
Recording Entering Text You can enter the name of your baby or pet when taking pictures. In addition, you can enter characters (comments) on the pictures you have taken. When a screen that looks like the one on the right is displayed, you can enter characters. (Only alphabetical characters and symbols can be entered.) ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 & A a Delete Delete Set Cancel 1 A a Select Input Press 3/4/2/1 to select text and then press [MENU/SET] to register.
Recording Using the [Rec] Menu For details on [Rec] menu settings, refer to P41. [Picture Size] Applicable modes: Set the number of pixels. The higher the numbers of pixels, the finer the detail of the pictures will appear even when they are printed onto large sheets. Settings [ Picture Size ] 4608k3456 [ ]¢ 3264k2448 [ ] 2048k1536 ¢ [ [ ] 640k480 ] 4608k3072 [ 7 ]¢ 3264k2176 [ 2.5 ] 2048k1360 [ ] 4608k2592 [ ] 1920k1080 [ ] 3456k3456 [ 2.
Recording [Quality] Applicable modes: Set the compression rate at which the pictures are to be stored. Settings Description of settings [A] ([Fine]) When giving priority to the picture quality [›] ([Standard]) When using the standard picture quality and increasing the number of pictures to be recorded without changing the number of pixels • The setting is fixed to [›] in the following case. – [High Sens.
Recording [Sensitivity] Applicable modes: This allows the Sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. Settings [AUTO] [ ] Description of settings The ISO sensitivity is automatically adjusted according to the brightness.
Recording [White Balance] Applicable modes: In sunlight, under incandescent lights or in other such conditions where the colour of white takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest to what is seen by the eye in accordance with the light source.
Recording ∫ Auto White Balance Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a colour close to white, Auto White Balance may not function properly. In this case, set the White Balance to a mode other than [AWB].
Recording Finely adjusting the White Balance You can finely adjust the White Balance when you cannot acquire the desired hue by setting the White Balance. • Fine adjustment is possible only when the White Balance is set to [V]/[Ð]/[î]/[Ñ]/[Ò]. 1 2 3 Select the White Balance to finely adjust and then press [DISP.] to display [WB Adjust.]. Press 2/1 to adjust the White Balance. 2 ([Red]): Press when the hue is bluish. 1 ([Blue]): Press when the hue is reddish.
Recording [AF Mode] Applicable modes: This allows the focusing method that suits the positions and number of the subjects to be selected. Settings [š] Description of settings ([Face Detection]) The camera automatically detects the person’s face. (max. 12 areas) The focus and exposure can then be adjusted to fit that face no matter what portion of the picture it is in. [ ] ([AF Tracking])¢ Focus can be adjusted to a specified subject. Focus will keep on following the subject even if it moves.
Recording ∫ About [š] ([Face Detection]) The following AF area frames are displayed when the camera detects the faces. Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as the faces within the yellow AF areas are also brought into focus.
Recording ∫ Setting up [ ] ([AF Tracking]) Align the subject with the AF tracking frame, and then press 4 to lock onto the subject. A AF tracking frame • AF area will be displayed in yellow when a subject is recognised, and focus will automatically adjust continuously following the subject’s movement (Dynamic tracking). • AF tracking is cancelled when 4 is pressed again.
Recording [i.Exposure] Applicable modes: Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to real life. Settings: [ON]/[OFF] • Compensation effect may not be achieved depending on the conditions. [i.Zoom] Applicable modes: Zoom magnification can be increased while minimising deterioration of the image quality. Settings: [ON]/[OFF] • Refer to P60 for details.
Recording [Burst Shooting] Applicable modes: Pictures are taken continuously while the shutter button is pressed. Settings Description of settings Number of recordable pictures • The focus is adjusted for each picture recorded in [ ] ([2 fps AF-Continuous]) the burst. max. • The Burst speed changes according to the recording 100 pictures¢ conditions. [ 10 ] [ ([10 fps AF-Single]) ] ([Hi-Speed Burst]) • The focus, exposure and White Balance are fixed to max. the settings for the first picture.
Recording • Depending on the operating conditions, it may take time to take the next picture if you repeat the recording of pictures. • It may take time to save pictures taken in Burst Mode on the card. If you take pictures continuously while saving, the maximum number of recordable pictures decreases. For continuous shooting, use of a high speed memory card is recommended. • The burst speed (pictures/second) may become slower depending on the recording environment.
Recording [Red-Eye Removal] Applicable modes: When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed whenever the flash is used. The camera automatically detects red-eye and corrects the picture. Settings: [ON]/[OFF] • This function works only when the camera detects a face. • Under certain circumstances, red-eye cannot be corrected. [Stabilizer] Applicable modes: The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter.
Recording [Date Stamp] Applicable modes: You can take a picture with date and time of recording. Settings Description of settings [W/O TIME] Stamp the year, month, and day. [WITH TIME] Stamp the year, month, day, hour, and minutes. [OFF] — • Date information for pictures recorded with the [Date Stamp] set cannot be deleted. • When printing pictures with [Date Stamp] at a shop or with a printer, the date will be printed on top of the other if you choose to print with the date.
Recording Using the [Motion Picture] Menu For details on [Motion Picture] menu settings, refer to P41. • The [Motion Picture] menu is not displayed in the following cases. – [Soft Focus]/[Star Filter] (Creative Control Mode) [Rec Quality] Applicable modes: This sets up the picture quality of motion pictures.
Recording [Continuous AF] Applicable modes: It will continually keep on focusing on a subject for which the focus was once set. Settings: [ON]/[OFF] • Set this function to [OFF] if you wish to fix the focus on the position where you started the motion picture recording. • The setting is fixed to [OFF] in the following case. – [Starry Sky] (Scene Mode) [Wind Cut] Applicable modes: This reduces the wind noise in the audio recording.
Playback/Editing Various methods of playback You can play back the recorded pictures in various methods. 1 2 3 4 Press [(]. Press [MENU/SET]. Press 3/4/2/1 to select [Playback Mode], and then press [MENU/SET]. Press 3/4 to select item, and then press [MENU/SET]. • Following items can be selected.
Playback/Editing [Slide Show] You can play back the pictures you have taken in sequence at specified intervals. In addition, you can play back the slideshow of a desired type of images, such as pictures or motion pictures. This playback method is recommended when you have connected the camera to a TV set to view the pictures you have taken. Press 3/4 to select [Start] and then press [MENU/ SET].
Playback/Editing ∫ To filter images for slide show playback You can filter images and play them back in a slide show by selecting [Filtering] on the slide show menu screen. • If you select [All], you can play back all images in a slide show. You can also filter images by using the same setting as [Filtering Play]. Refer to P110–111 for the setting.
Playback/Editing [Filtering Play] You can play back images sorted by category or recording date. Settings Description of settings [Picture Only] Only still pictures are played back. [Video Only] Only motion pictures are played back. [Category Selection] This mode allows you to search images by Scene Mode or other categories (such as [Portrait], [Scenery] or [Night Scenery]) and sort the pictures into each of the categories. You can then play back the pictures in each category.
Playback/Editing You can play back pictures taken on each date 1 2 Press 3/4 to select [Select Date] and then press [MENU/SET]. Press 3/4/2/1 to select the date to be played back, and then press [MENU/SET]. • If there were no pictures recorded during a month, that month is not displayed. • The recording date of the picture selected in the playback screen becomes the date selected when the calendar screen is first displayed. • You can display the calendar between January 2000 and December 2099.
Playback/Editing [Calendar] You can search for images by recorded date. 1 2 Press 3/4/2/1 to select the date you want to search. Press [MENU/SET] to display a list of pictures. 1/52 • Pictures are displayed with Multi Playback (30 screens). The cursor appears on the picture at the beginning of the selected date. 3 Press 3/4/2/1 to select a picture and then press [MENU/SET]. • To continue the search, return to the previous screen by rotating the zoom lever towards [W].
Playback/Editing Having Fun with Recorded Pictures ([Creative Retouch]) You can add your desired effects to the pictures that you have taken. • The processed pictures are newly generated, so be sure that you have enough space in the built-in memory or on the card. Note also that processing will not be possible if the Write-Protect switch of the card is in the [LOCK] position. • Effects may be difficult to see depending on the picture. 1 2 Press 2/1 to select a picture, and then press 3.
Playback/Editing Using the [Playback] Menu For details on [Playback] menu settings, refer to P41. You can perform actions like cropping recorded pictures, as well as set up the protection of recorded images, etc. • With [Creative Retouch], [Text Stamp], [Resize] or [Cropping], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture.
Playback/Editing ∫ To delete the received location information 1 Select [Location Logging] on the [Playback] menu. 2 Press 3/4 to select [Delete Location Data] and then press [MENU/SET]. 3 Press 3/4 to select the period you want to delete, then press [MENU/SET]. • Confirmation screen is displayed. It is executed when [Yes] is selected.
Playback/Editing [Text Stamp] You can stamp recording dates/times and names on recorded pictures. 1 2 3 Select [Text Stamp] on the [Playback] menu. Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET] to set. • [‘] is displayed on pictures already with date or text stamped. [MULTI] setting Press [DISP.] to set (repeat), and then press [MENU/ SET] to set. • The setting is cancelled when [DISP.] is pressed again.
Playback/Editing 7 8 Press [ ]. Press 3 to select [OK], and then press [MENU/SET]. • Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed. • When you print pictures stamped with text, the date will be printed over the stamped text if you specify printing of the date at the photo shop or on the printer. • You can set up to 50 pictures at one time in [MULTI]. • The picture quality may deteriorate when text stamping is carried out.
Playback/Editing [Video Divide] Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need. It cannot be restored once divided. 1 2 3 Select [Video Divide] on the [Playback] menu. Press 2/1 to select the motion picture to divide, and then press [MENU/ SET]. Press 3 at the location to divide. • Motion picture is played back from the same location when 03s 3 is pressed again.
Playback/Editing [Resize] To allow easy posting to web pages, attachment to email etc., picture size (number of pixels) is reduced. 1 2 3 Select [Resize] on the [Playback] menu. Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture and size. [SINGLE] setting 1 Press 2/1 to select the picture, and then press [MENU/SET]. 2 Press 2/1 to select the size, and then press [MENU/SET]. [MULTI] setting 1 Press 3/4 to select the size, and then press [MENU/SET].
Playback/Editing [Cropping] You can enlarge and then clip the important part of the recorded picture. 1 2 3 4 Select [Cropping] on the [Playback] menu. Press 2/1 to select the picture, and then press [MENU/SET]. Use the zoom lever and press 3/4/2/1 to select the parts to be cropped. Zoom lever (W): Reduction Zoom lever (T): Enlargement 3/4/2/1: Move Press [MENU/SET]. • Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.
Playback/Editing [Print Set] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card (P124) and then set the print setting.
Playback/Editing ∫ To print the date After setting the number of prints, set/cancel printing with the recording date by pressing [DISP.]. • Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer. • The date cannot be printed on pictures with date or text stamped. • You can set the number of prints up to 999.
Playback/Editing [Protect] You can set protection for pictures you do not want to be deleted by mistake. 1 2 3 Select [Protect] on the [Playback] menu. Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET]. • The settings are cancelled when [MENU/SET] is pressed again. • Exit the menu after it is set. [SINGLE] [MULTI] 1 2 3 4 5 6 ∫ Cancelling all the [Protect] settings 1 Select [Protect] on the [Playback] menu.
Playback/Editing [Copy] You can copy the data of the pictures you have taken from the built-in memory to a card or from a card to the built-in memory. 1 2 Select [Copy] on the [Playback] menu. Press 3/4 to select the copy destination and then press [MENU/SET]. [ ] ([IN>SD]): All the picture data in the built-in memory are copied onto the card at one time. [ ] ([SD>IN]): One picture at a time is copied from the card to the built-in memory. Press 2/1 to select the picture and then press [MENU/SET].
Wi-Fi Wi-FiR function ∫ Use the camera as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device.
Wi-Fi ∫ About the Wi-Fi connection lamp Lit blue: The Wi-Fi connection is on standby Blinking blue: Sending/receiving data through the Wi-Fi connection ∫ About the [Wi-Fi] button Pressing and holding [Wi-Fi] before connecting to Wi-Fi (When connecting to a smartphone/tablet) • The information required for connecting the smartphone/tablet to this unit (QR code, SSID and password) is displayed.
Wi-Fi What you can do with the Wi-Fi function Controlling with a Smartphone/Tablet Recording images remotely with a smartphone (P133) Playing back pictures in the camera (P133) Saving images stored in the camera (P134) Sending acquired location information to the camera (P135) When sending images to PC Sending an image each time a recording is made (P140) Sending selected images (P141) To transfer images automatically (P142) These operating instructions refer to both smartphones and tablets as “smart
Wi-Fi Controlling with a Smartphone/Tablet Using a smartphone, you can record images on the camera and save them. You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on your smartphone. Installing the smartphone/tablet app “Image App” The “Image App” is an application provided by Panasonic. • OS App for AndroidTM: Android 2.3.3 or higher App for iOS: iOS 6.0 or higher (Please note that the iPhone 3GS is not supported.) 1 2 Connect the smartphone to a network.
Wi-Fi Connecting to a smartphone/tablet By pressing and holding [Wi-Fi], you can easily connect the camera to a smartphone or tablet. Preparations • Install the “Image App” in advance. (P128) 1 Press and hold [Wi-Fi]. • The information required for connecting the smartphone to this unit (QR code, SSID and password) is displayed. • If you press and hold [Wi-Fi] when the camera is turned off, you can turn it on.
Wi-Fi If you are using an iOS device When scanning the QR code to set up a connection (If you are reconnecting the camera, steps 1 to 5 are not required) 1 Start “Image App”. (P128) 2 Select [QR code], and then select [OK]. 3 Using “Image App”, scan the QR code displayed on the screen of the camera. Please set on your smartphone Please scan the QR code using "Image App", or enter the password into Wi-Fi settings SSID: Password: Cancel 4 Install the profile. • A message will be displayed on the browser.
Wi-Fi When using an SSID and password to set up a connection 1 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet. 2 Select the SSID displayed on the screen of the camera. Wi-Fi 0123456789ABC 3 Enter the password displayed on the screen of the camera. (Only when connecting for the first time) 4 Start “Image App”. (P128) If you are using an Android device When scanning the QR code to set up a connection 1 Start “Image App”. (P128) 2 Select [QR code].
Wi-Fi When using an SSID and password to set up a connection 1 Start “Image App”. (P128) • If a message appears stating that a camera search is in progress, close the message. 2 Select [Wi-Fi]. 3 Select the SSID displayed on the screen of the camera. Please set on your smartphone Please scan the QR code using "Image App", or enter the password into Wi-Fi settings SSID: Password: Cancel 4 Enter the password displayed on the screen of the camera.
Wi-Fi Taking pictures via a smartphone/tablet (remote recording) 1 2 Connect to a smartphone. (P129) Operate the smartphone. 1 Select [ ]. 2 Operate the zoom to decide on the composition. 3 Release the shutter. • The recorded images are saved in the camera. • Motion pictures cannot be recorded. • Some settings are not available. A • Remote recording is disabled in the following Recording Modes. If you try to use it, the camera will switch to Programme AE Mode.
Wi-Fi Saving images stored in the camera 1 2 Connect to a smartphone. (P129) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch and hold an image, and drag it to save it.
Wi-Fi Sending location information to the camera from a smartphone/tablet You can acquire location information from a smartphone, and write it on images afterwards. • You can write location information sent from a smartphone on images by using [Location Logging] in the [Playback] menu of the camera.
Wi-Fi Sending images to a smartphone/tablet by controlling the camera ∫ Methods for sending and images that can be sent JPEG MP4 Sending an image each time a recording is made ([Send Images While Recording]) ± — Sending selected images ([Send Images Stored in the Camera]) ± ± • Some images may not be played back or sent depending on the device. • For information on the playback of images, check the operating instructions of the destination device.
Wi-Fi Sending an image each time a recording is made ([Send Images While Recording]) 1 2 3 Press [Wi-Fi]. Press 3/4/2/1 to select [New Connection], and then press [MENU/SET]. Press 3/4 to select [Send Images While Recording], and then press [MENU/SET]. Select a function Remote Shooting & View Send Images While Recording Send Images Stored in the Camera Cancel 4 5 6 7 8 9 Select Press 3/4 to select [Smartphone], and then press [MENU/SET]. Press [MENU/SET]. Press [MENU/SET].
Wi-Fi Sending selected images ([Send Images Stored in the Camera]) 1 2 3 Press [Wi-Fi]. Press 3/4/2/1 to select [New Connection], and then press [MENU/SET]. Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/SET]. Select a function Remote Shooting & View Send Images While Recording Send Images Stored in the Camera Select Cancel 4 5 6 7 8 9 Set Press 3/4 to select [Smartphone], and then press [MENU/SET]. Press [MENU/SET]. Press [MENU/SET].
Wi-Fi When sending images to PC You can send pictures and motion pictures recorded with this unit to a PC. You can also set this unit so that images on it are transferred automatically while it is being charged.
Wi-Fi To create a folder that receives images • Create a PC user account [account name (up to 254 characters) and password (up to 32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. • The name of a destination folder must consist of 20 or less alphanumeric characters. (For Windows) Supported OS: Windows VistaR/WindowsR 7/WindowsR 8/WindowsR 8.
Wi-Fi Sending selected images ([Send Images Stored in the Camera]) 1 2 3 4 5 6 7 8 9 Press [Wi-Fi]. Press 3/4/2/1 to select [New Connection], and then press [MENU/SET]. Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/ SET]. Press 3/4 to select [PC], and then press [MENU/SET]. Press [MENU/SET]. • For details on the connection methods, refer to P146. Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].
Wi-Fi To transfer images automatically ([Smart Transfer]) Smart Transfer is a function that automatically transfers images in the camera to a PC. The transfer starts when you connect the camera to the AC adaptor (supplied). Example of [Auto Transfer] A AC adaptor (supplied) B USB connection cable (supplied) C PC 1 2 3 4 Set [Auto Transfer] to [ON] Record Charge Start a transfer To perform Smart Transfer, follow the steps below: 1 Set up Smart Transfer (initial setup).
Wi-Fi Configuring [Smart Transfer] When using Smart Transfer for the first time, follow the steps below to set it up. From the next time on, you can change the settings from [Set Destination] (P144). 1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P41) 2 Press 3/4 to select [Smart Transfer], and press [MENU/SET]. 3 Select the method for connecting to a wireless access point, and set. • Refer to P146 for details. 4 Set the transfer destination.
Wi-Fi [Set Destination] Changing the transfer destination or settings of images. 1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P41) 2 Press 3/4 to select [Smart Transfer], and press [MENU/SET]. 3 Press 3/4 to select [Set Destination], and press [MENU/SET]. 4 Press 3/4 to select the item, and press [MENU/SET]. Item Description of settings [Destination] Changes the wireless access point to be connected. Select the method for connecting to a wireless access point, and set.
Wi-Fi About Connections You can select a connection method after selecting a Wi-Fi function and a destination. When connecting with the same settings as the previous ones, you can use the Wi-Fi function quickly by connecting via [History Connection] or [Favorite Connection]. Connecting to a PC ([Via Network]) (P146) Connects via a wireless access point. Connect to the network (AP) Via Network A OK Cancel Connecting to a smartphone/tablet ([Direct]) (P148) Your device connects directly to this unit.
Wi-Fi Connecting to a PC (via a network) You can select the method for connecting to a wireless access point. ¢ WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the manual of the wireless access point.
Wi-Fi If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted. • When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using. 1 2 Press 3/4 to select the wireless access point you are connecting to, and press [MENU/SET]. • Pressing [DISP.
Wi-Fi Connecting to a smartphone/tablet (direct connection) You can directly connect your device and the camera. Enter SSID and password Manual Connection OK Cancel Connection method [Manual Connection] Description of settings Enter the SSID and password into the device. The SSID and password are displayed on the connection waiting screen of this unit. • You can also set up a connection by scanning a QR code with a smartphone.
Wi-Fi Connecting quickly with the same settings as the previous ones ([History Connection]/[Favorite Connection]) When the Wi-Fi function is used, a record is saved in the history. You can register records as favourites. Connecting from the history or favourites allows you to easily connect with the same settings as the previous ones. 1 2 Press [Wi-Fi]. Press 3/4/2/1 to select [History Connection] or [Favorite Connection], and then press [MENU/ SET].
Wi-Fi Editing the items registered to favourites 1 2 3 4 Press [Wi-Fi]. Press 3/4/2/1 to select [Favorite Connection], and then press [MENU/SET]. Select the favourite item you want to edit with 3/4, and then press 1. Press 3/4 to select the item, and press [MENU/SET]. Item Description of settings [Remove from Favorite] [Change the Order in Favorite] [Change the Registered Name] — Select the destination with 3/4, and then press [MENU/SET].
Wi-Fi About settings for sending images To send images, select [New Connection] , and select the method for sending them. Even after completing the connection, you can still change the size of the images to be sent. Select a function Remote Shooting & View Send Images While Recording Send Images Stored in the Camera Cancel Select Set ∫ Images that can be sent Destination JPEG MP4¢ [Smartphone] ± ± [PC] ± ± ¢ Sending by [Send Images While Recording] is not available.
Wi-Fi Send Images While Recording A picture can be automatically sent to a specified device every time you take it. • Since the camera gives priority to recording, sending may take longer during the recording. • When connected with [Send Images While Recording], [ ] is displayed on the recording screen, and [ ] is displayed while sending a file. • If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will not be resent.
Wi-Fi [Wi-Fi Setup] Menu For details on how to select the [Wi-Fi] menu settings, refer to P41. Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi. 1 2 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. Press 3/4 to select item, and press [MENU/SET]. [Smart Transfer] — • Refer to P142 for details. [PC Connection] You can set the workgroup.
Wi-Fi [Wi-Fi Password] To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Delete] • For details on how to enter characters, refer to “Entering Text” section on P90. • Make a copy of password.
Connecting to other equipment Playing Back Pictures on a TV Screen Pictures recorded with this unit can be played back on a TV screen. Preparations: Turn this unit and the TV off. • Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 HDMI socket Video socket High quality Connect the camera and a TV. • Check the directions of the connectors, and plug them straight in or unplug them straight out.
Connecting to other equipment To connect with an AV cable (optional) D AV cable (optional) E Yellow: to the video input socket F White: to the audio input socket G Insert the AV cable so that its [ ] mark will face the [ ] mark side of the camera. • Always use a genuine Panasonic AV cable (DMW-AVC1: optional). • Check the [TV Aspect]. (P49) • [Wi-Fi] menu cannot be used. 2 3 Turn on the TV and select the input to match the terminal in use. Turn the camera on and then press [(].
Connecting to other equipment Saving still pictures and motion pictures on your PC You can transfer the pictures in the camera to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. • If the computer being used does not support SDXC Memory Cards, a message prompting you to format may appear. (Doing so will cause recorded images to be erased so do not choose to format.
Connecting to other equipment Transferring images to a PC 1 Connect the computer and camera with the USB connection cable (supplied). • Please turn this unit on and your PC before connecting. • Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may bend out of shape, which may cause malfunction.) • Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).
Connecting to other equipment ∫ About the folder structure of the camera The content (folder structure) of the built-in memory of the camera/the card is displayed on a PC as follows: • Built-in Memory • Card DCIM 100_PANA P1000001.JPG P1000002.JPG DCIM: 1 Folder number 2 File number 3 JPG: MP4: MISC: Images Still pictures Motion pictures DPOF print ¢ Cannot be created in the built-in memory. P1000999.
Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s monitor. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures from the built-in memory.
Connecting to other equipment Selecting a single picture and printing it 1 2 Press 2/1 to select the picture and then press [MENU/SET]. Press 3 to select [Print start] and then press [MENU/SET]. • Refer to P162 for the items which can be set before starting to print the pictures. PictBridge 6LQJOH 6HOHFW 3ULQW VWDUW 3ULQW ZLWK 'DWH OFF 1XP RI SULQWV 1 3DSHU 6L]H 3DJH /D\RXW • Disconnect the USB connection cable after printing.
Connecting to other equipment Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures in a paper size or a layout which is not supported by the camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.
Connecting to other equipment [Paper Size] { Settings on the printer are prioritised. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm • Paper sizes not supported by the printer will not be displayed.
Connecting to other equipment [Page Layout] (Layouts for printing that can be set with this unit) { Settings on the printer are prioritised. á 1 picture with no frame on 1 page â 1 picture with a frame on 1 page ã 2 pictures on 1 page ä 4 pictures on 1 page • An item cannot be selected if the printer does not support the page layout.
Others Screen Display ∫ In recording 1 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 2 3 4 5 678 9 10 11 5 12 13 14 15 16 C1 3s 100 F3.
Others ∫ In playback 1 18 17 16 15 14 2 3 4 100 _ 0001 03s 5 6 7 1/5 8 1 9 10 11 13 12 1 2 3 4 5 6 7 8 Playback Mode (P107) Protected picture (P123) Date/Text stamped display (P104, 116) After Creative Retouch (P113) Picture Size (P91) Quality (P92) Battery indication (P14) Picture number Total pictures Elapsed playback time (P37): 08m30s ¢ 9 Location Information display (P114, 135) 10 Histogram (P46) 11 Number of prints (P121) 12 Creative Retouch (P113) Motion picture playback (P37) Play panor
Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [This picture is protected] • Delete the picture after cancelling the protect setting. (P123) [Some pictures cannot be deleted]/[This picture cannot be deleted] • Pictures not based on the DCF standard cannot be deleted. Perform formatting (P50) on this unit after saving necessary data on a PC, etc.
Others [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with this unit. (P19) [Insert SD card again]/[Try another card] • An error has occurred accessing the card. Insert the card again. • Insert a different card. [Read Error/Write Error Please check the card] • It has failed to read or write data. Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again. • The card may be broken. • Insert a different card.
Others [Failed to connect wireless access point]/[Connection failed]/[No destination found] • Check following regarding the wireless access point. – The wireless access point information set on this unit is wrong. Check the authentication type, encryption type, and encryption key. (P147) – Power of the wireless access point is not turned on. – Setting of the wireless access point is not supported by this unit. • Check the network setting of the destination.
Others Troubleshooting First, try out the following procedures (P170–181). If the problem is not resolved, it may be improved by selecting [Reset] (P48) on the [Setup] menu. Battery and power source The camera cannot be operated even when it is turned on. The camera turns off immediately after it is turned on. • The battery is exhausted. > Charge the battery. • If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [Economy].
Others Recording The picture cannot be recorded. • Is the mode dial correctly set? • Is there any memory remaining on the built-in memory or the card? > Delete the pictures which are not necessary to increase available space in the memory. (P40) • You may not be able to record for a short while after turning this unit on when using a large capacity card. The recorded picture is whitish. • The picture can become whitish if there is dirt, e.g. fingerprints on the lens.
Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P93) > Take pictures in bright places. • Have you set [High Sens.
Others Subject cannot be locked. (AF tracking not possible) • Set the AF area to the distinctive colour of the subject if there is a part that is different from the surrounding colour. (P99) Recording by Panorama Shot Mode is ended before finishing. • If the camera is moved too slowly, the camera assumes that camera motion was stopped and ends the still picture recording. • If there is a lot of camera shake in the recording direction while moving the camera, recording ends.
Others Monitor The monitor becomes darker or brighter for a moment. • This phenomenon appears when you press the shutter button halfway to set the aperture value and does not affect the recorded pictures. • This phenomenon also appears when the brightness changes when the camera is zoomed or when the camera is moved. This is because of operation of the automatic aperture of the camera, and it is not a malfunction. The monitor flickers indoors.
Others Flash The flash is not activated. • Is the flash setting set to [Œ]? > Change the flash setting.
Others With a Calendar Search, pictures display dates differing from the actual dates on which the pictures were taken. • Is the clock in the camera set properly? (P22) • When pictures edited using a PC or pictures taken by other equipment are searched, they may display dates differing from the actual dates on which the pictures were taken. White round spots like soap bubbles appear on the recorded picture.
Others About the Wi-Fi function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. (General tips for using a Wi-Fi connection) • Try [Reset Wi-Fi Settings] in the [Setup] menu. • Use within the communication range of the device to be connected. • Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? > Radio waves may get interrupted when used simultaneously.
Others This unit is not displayed in the Wi-Fi setting screen of the smartphone. • From the Wi-Fi setting menu on the smartphone, turn off and then on the Wi-Fi function. Images cannot be transmitted to a PC. • When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not be possible. When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and password are not recognised, so I cannot connect to the PC.
Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? > Set the TV input to External Input Mode. The display areas on the TV screen and the camera’s monitor are different. • Depending on the TV model, the pictures may be elongated horizontally or vertically or they may be displayed with their edges cut off. The motion pictures cannot be played back on a TV.
Others The ends of the pictures are cut at printing. • When using a printer with a Cropping or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.) • When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be printed. The panorama picture is not printing correctly.
Others When pictures are taken using the zoom, they are slightly distorted and the areas around the subject contain colours which are not actually present. • It is possible that the subject may be warped slightly, or the borders get coloured, depending on the zoom magnification, due to the characteristics of the lens, but this is not a malfunction. Zooming stops instantaneously. • When using the Extra Optical Zoom, the zooming action will stop temporarily. This is not a malfunction.
Others Cautions for Use Optimal use of the camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
Others Cleaning Before cleaning the camera, remove the battery or disconnect the power plug from the outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. If the surrounding temperature is too high or too low, the operating time of the battery may become shorter. Always remove the battery after use. • Place the removed battery in a plastic bag, and store or carry away from metallic objects (clips, etc.).
Others Card Do not leave the card where the temperature is high, where electromagnetic waves or static electricity are easily generated or exposed to direct sunlight. Do not bend or drop the card. • The card may be damaged or the recorded content may be damaged or deleted. • Put the card in the card case or the storage bag after use and when storing or carrying the card. • Do not allow dirt, dust, or water to get into the terminals on the back of the card and do not touch the terminals with your fingers.
Others When not using the camera for a long period of time • Store the battery in a cool and dry place with a relatively stable temperature: [Recommended temperature: 15 oC to 25 oC (59 oF to 77 oF), Recommended humidity: 40%RH to 60%RH] • Always remove the battery and the card from the camera. • If the battery is left inserted in the camera, it will discharge even if the camera is turned off.
• SDXC Logo is a trademark of SD-3C, LLC. • HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. • iPhoto, iTunes, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. • iPhone is a trademark of Apple Inc., registered in the U.S.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
