Operating Instructions for advanced features Digital Camera Model No. DMC-TZ70 DMC-TZ71 Please read these instructions carefully before using this product, and save this manual for future use.
Contents Preparations Basics Before use............................................... 8 Standard Accessories.......................... 10 Names and Functions of Main Parts............................................. 11 Viewfinder (LVF)...........................................14 [MENU/SET] button / Cursor button / Control dial...................................................16 Putting on the hand strap.............................16 Sequence of operations.......................
Contents Using the [Setup] menu....................... 63 [Clock Set]....................................................63 [World Time].................................................63 [Travel Date].................................................63 [Airplane Mode]............................................63 [Beep]...........................................................64 [Cust.Set Mem.]...........................................65 [Fn Button Set].............................................
Contents Taking pictures by setting the aperture value [Aperture-Priority] Mode.................... 107 Taking pictures by setting the shutter speed [Shutter-Priority] Mode...................... 108 Taking pictures by setting the aperture value and shutter speed [Manual Exposure] Mode................... 109 Taking Pictures with different picture effects [Creative Control] Mode......................111 [Expressive]................................................ 113 [Retro].................................
Contents Using the [Rec] menu......................... 141 [Aspect Ratio].............................................141 [Picture Size]..............................................141 [Quality]......................................................142 [Sensitivity].................................................143 [ISO Limit Set]............................................144 [White Balance]..........................................145 [AF Mode]...................................................
Contents Wi-Fi/NFC Wi-Fi® Function and NFC Function...................................... 189 [Airplane Mode]..........................................191 What you can do with the Wi-Fi function...................................... 192 Operating the camera using a smartphone/tablet.............................. 193 Installing the smartphone/tablet app “Panasonic Image App”..............................193 Connecting to a smartphone/tablet............
Contents Connecting with other devices Others Viewing on TV screen........................ 261 VIERA Link (HDMI) (HDAVI Control™)......263 Viewing 3D still pictures.............................265 Storing recorded still pictures and motion pictures in the recorder........ 267 Copying by inserting the card into the recorder......................................................267 Dubbing playback pictures via AV cables (optional)....................................................
Preparations Before use ■■Camera handling Keep the camera away from excessive vibration, force, or pressure. ●●Avoid using the camera under the following conditions, which may damage the lens, LCD monitor, viewfinder, or camera body. This may also cause the camera to malfunction or prevent recording.
Preparations Before use ■■Always take a test shot first Before important events when you will use the camera (at weddings, for example), always take a test shot to make sure that pictures and sound record correctly. ■■No compensation for missed shots We cannot compensate for missed shots if technical problems with the camera or card prevent recording.
Preparations Standard Accessories Check that all the accessories are supplied before using the camera. ●●The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to Basic Operating Instructions. ●●Battery Pack is indicated as battery pack or battery in the text. ●●SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text. ●●Please dispose of all packaging appropriately.
Preparations Names and Functions of Main Parts 1 2 3 4 5 1 Flash (→31, 86) 2 Self-timer indicator (→106) / AF Assist Lamp (→152) Illuminates when the self-timer is set or when the Auto Focus is operated in dark locations. 3 Control ring (→33) Allows you to zoom and adjust settings when recording. 4 Lens barrel 5 Lens 6 Speaker 7 Microphones (→31, 49) (Top) 6 7 8 9 10 11 8 Mode dial (→30) 12 Use this to select the recording mode.
Preparations Names and Functions of Main Parts 16 17 18 19 20 21 22 23 24 16 Viewfinder (LVF) (→14) In this manual, “viewfinder” is used to indicate the LVF. 17 Diopter adjustment dial (→15) Turn the dial to adjust the focus in the viewfinder. 18 Eye Sensor The display is automatically switched to viewfinder when your eye or an object moves close to the viewfinder. (→14) 19 [LVF] button (→14) / [Fn2] button (→14, 134) Use this to switch display between viewfinder and LCD monitor.
Preparations Names and Functions of Main Parts 22 25 27 26 31 28 30 29 32 22 Strap eyelet (→16) 25 [Wi-Fi] antenna 26 NFC antenna (→201) 27 [Wi-Fi] button (→190) 28 Playback button Use this to select the recording mode or playback mode. 29 [Q.MENU/ ] / [ ] button You can display the Quick Menu (→34) and erase pictures (→59). You can also use this button to return to the previous screen while a menu is displayed (→61). 30 [DISP.] button (→77, 159) Use this to change display.
Preparations Names and Functions of Main Parts Viewfinder (LVF) When you use the viewfinder, you can check the view of the subject even if you are in a bright area. ■■Switching between the LCD monitor and viewfinder You can operate the [LVF]/[Fn2] button in two ways, using it either as the [LVF] button or as a function button [Fn2]. You can use this button as the [LVF] button at the time of purchase. ••For details on the function button, refer to (→134).
Preparations Names and Functions of Main Parts ■■Setting the sensitivity of the eye sensor or setting to switch the display between the viewfinder and monitor The sensitivity of the eye sensor can be set using [Eye Sensor] in the [Setup] menu. Select [Eye Sensor] from the [Setup] menu (→61) Use to select [Sensitivity] or [LVF/Monitor Switch] and press [MENU/SET] Use to select the setting and press [MENU/SET] [Sensitivity] Use this setting to set the sensitivity of the eye sensor.
Preparations Names and Functions of Main Parts [MENU/SET] button / Cursor button / Control dial [MENU/SET] button •• Use this button to display the menus, enter the settings, etc. (→61) Cursor button This button is used to move the cursor on the menu screens and for other functions. (→61) You can perform the following operations while recording.
Preparations Charging battery Always use the dedicated AC adaptor (supplied), USB connection cable (supplied), and battery for this camera. ••Always charge before first use! (battery shipped uncharged) ••Charge the battery while it is in the camera. Camera status Charge Turn off Yes Turn on No ■■About batteries that you can use with this unit It has been found that counterfeit battery packs which look very similar to the genuine products are made available to purchase in some markets.
Preparations Charging battery Inserting the battery To charge the battery, insert it into the camera. Slide the release lever to the [OPEN] position and open the card/battery door [OPEN] [LOCK] Release lever Insert the battery all the way ••Insert the battery all the way firmly and check that it is locked by lever. Close the card/battery door and then slide the release lever to the [LOCK] position Lever Make sure to insert the battery in the correct orientation.
Preparations Charging battery Charging the battery We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F) (same for the battery temperature). Make sure that the camera is turned off. AC adaptor (supplied) USB connection cable (supplied) Computer Getting ready: Turn on the computer. When charging the camera, connect the USB connection cable (supplied) to the [AV OUT/DIGITAL] socket.
Preparations Charging battery ●●If the computer enters sleep mode during charging, charging may be stopped. ●●If a notebook computer that is not connected to an electrical outlet is connected to the camera, the battery of the notebook computer will be depleted. Do not leave the camera and notebook connected for a long period of time. ●●Always connect the USB connection cable to the USB connector on your computer.
Preparations Charging battery ●●Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional). Doing so may cause malfunction of the camera. ●●Do not use any other AC adaptors except the supplied one. ●●Do not use a USB extension cable. ●●The AC adaptor (supplied) and the USB connection cable (supplied) are dedicated accessories of this camera. Do not use them for other devices.
Preparations Charging battery Remaining battery When using the camera, the remaining battery capacity is displayed. Remaining battery (only when using battery) (flashes red) If the battery mark flashes red, recharge or replace battery. Estimated number of recordable pictures and operating time The operating times and number of recordable pictures will differ according to the environment and the operating conditions.
Preparations Charging battery ■■Recording motion pictures (When using LCD monitor) [Rec Format] [Rec Quality] Available recording time Actual available recording time* [AVCHD] [FHD/50p] [MP4] [FHD/50i] [FHD/25p] Approx. 75 min Approx. 80 min Approx. 90 min Approx. 30 min Approx. 35 min Approx. 40 min * The time you can actually record when repeatedly turning the camera on and off, starting and stopping recording and using zoom. ●●Recording conditions ••Temperature 23 °C (73.
Preparations Inserting and removing the card (optional) ••Make sure that the camera is turned off. Slide the release lever to the [OPEN] position and open the card/ battery door [OPEN] [LOCK] Release lever Insert the card all the way ••Push in until it clicks. Close the card/battery door and then slide the release lever to the [LOCK] position Card (Check orientation) ■■To remove card Do not touch the terminals on the back of the card.
Preparations Saving your pictures (cards and built-in memory) Pictures will be saved to a card if one is inserted, or to the built-in memory [ ] if not. ■■Built-in memory (approx. 86 MB) ●●Pictures may be copied between cards and the built-in memory. (→188) ●●The access time for the built-in memory may be longer than the access time for a card. ■■Compatible memory cards (optional) The following SD standard-based cards (Panasonic brand recommended) can be used.
Preparations Saving your pictures (cards and built-in memory) Estimated recording capacity (number of pictures/recording time) The number of pictures you can take and the recording time vary in proportion to card capacity (and depending on recording conditions and type of card). Estimated remaining pictures or recording time capacity (switch with [Remaining Disp.
Preparations Saving your pictures (cards and built-in memory) ■■Recording time capacity (motion pictures) ([h], [m] and [s] indicate “hour”, “minute” and “second”.
Preparations Setting the clock The clock is not set when the camera is shipped. ••Disconnect the unit from the AC adaptor (supplied). Press the Camera [ON/OFF] button The camera is turned on. If the language select screen is not displayed, proceed to step . Press [MENU/SET] while the message is displayed Press to select the language, and press [MENU/SET] ••The [Please set the clock] message appears.
Preparations Setting the clock When [Please set the home area] is displayed, press [MENU/SET] Press to set your home area and press [MENU/SET] Current time City or area name Difference from GMT (Greenwich Mean Time) ●●If the clock is not set, the correct date cannot be printed when you order a photo studio to print the picture, or when you stamp the date on the pictures with [Date Stamp] or [Text Stamp].
Basics Sequence of operations Press the Camera [ON/OFF] button to turn on the camera 1 Set to the desired recording mode Align the mode dial correctly to → the mode that you want to use. [Intelligent Auto] Mode [Program AE] Mode 2 [Aperture-Priority] Mode [Shutter-Priority] Mode [Manual Exposure] Mode [Custom] Mode [Panorama Shot] Mode [Scene Mode] [Creative Control] Mode Take pictures with automatic settings. (→35) Take pictures with automatic shutter speed and aperture value settings.
Basics Sequence of operations Aim the camera and shoot ■■Taking still pictures Press the shutter button halfway to focus Press the shutter button fully to take the picture Press halfway (press lightly to focus) Press fully (press the button all the way to record) ■■Recording motion pictures Press the motion picture button to start recording Press the motion picture button again to end recording 3 ■■Holding the camera Flash/AF Assist Lamp Microphones Do not block the flash or the lamp.
Basics Sequence of operations Play back pictures Press the Playback button 4 Press or turn the control dial to select the picture to be displayed ■■Viewing motion pictures Select a picture with the motion picture icon, and press .
Basics Using the control ring/control dial The “Control Ring/Control Dial” is an easy and convenient way to adjust several settings, depending on the camera mode selected. You can use the control ring ( )/control dial ( ) to change the settings of the unit. (In [Intelligent Auto] Mode) Setting indication Items that can be set by the control ring/control dial vary depending on recording modes. Following are the pre-assigned settings.
Basics Using the control ring/control dial Using Quick menu During recording, you can easily call some of the menu items and set them. Press [Q.MENU/ ] button Press to select menu items ••The menu items and setting items that are displayed differ depending on the recording mode.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode ■■Recording mode: This mode is recommended for those who want to point and shoot or beginners as the camera optimises settings to match the subject and recording environment.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode Automatic Scene Detection Camera reads scene when pointed at subject, and makes optimum settings automatically.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode Defocusing the background You can also use [Intelligent Auto] Mode to adjust background defocusing easily, as with in [Aperture-Priority] mode. Press Turn the control ring or control dial to adjust background defocusing Defocus background condition Defocus the background Focus the background ••[AUTO] is displayed in the icon during automatic adjustment. ••You can also make adjustments with .
Basics Taking pictures with automatic settings [Intelligent Auto] Mode ●●When you record motion pictures, the camera performs aperture control within the appropriate exposure range, and the background defocusing may not change for some subject brightness. ●●You can use [Intelligent Auto Plus] Mode to adjust brightness and colouring. (→42) ●●If the camera is turned off or the recording mode is changed, the background defocusing setting returns to [AUTO].
Basics Taking pictures with automatic settings [Intelligent Auto] Mode [iHandheld Night Shot] If a night scene is detected automatically while the unit is being handheld, [iHandheld Night Shot] can record a still picture with less jitter and less noise without using a tripod by combining a burst of pictures. It is preset to [ON] with this unit.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode [iHDR] When there is, for example, strong contrast between the background and the subject, [iHDR] records multiple still pictures with differing exposures and combines them to create a single still picture rich in gradation. It is preset to [ON] with this unit.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode AF Tracking This function enables the camera to continue to focus on the subject and adjust the exposure of the subject even when the subject is moving. Press to set [AF Mode] to AF Tracking ••To cancel AF Tracking → Press . Align the AF Tracking frame with the subject and press the shutter button halfway to lock ••To cancel AF Lock → Press [MENU/SET].
Basics Taking pictures with automatic settings [Intelligent Auto] Mode [Intelligent Auto Plus] Mode When [Intelligent Auto Plus] (iA+) Mode is selected, you can easily adjust the brightness and colouring, in addition to the background defocusing, without compromising the userfriendly operation of the [Intelligent Auto] Mode. ■■Switching to [Intelligent Auto Plus] Mode Use the [iA MODE] menu to switch the mode.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode ■■Adjusting brightness, colouring, and background defocusing Press Press to select an item to adjust Adjusts brightness. Adjusts background defocusing. Adjusts colouring. ••[AUTO] is displayed in the icon during automatic adjustment.
Basics Taking pictures with automatic settings [Intelligent Auto] Mode About [Intelligent Auto] setting items Only the menu items which are displayed in the [Intelligent Auto] Mode can be set. The settings selected in the [Program AE] or other modes will reflect on the menu items in the [Setup] menu that are not displayed. ●●The settings for the following items are different from other recording modes: ••[Picture Size] on the [Rec] menu ••[Beep] on the [Setup] menu ([Beep Level] and [Shutter Vol.
Basics Taking pictures with your own settings [Program AE] Mode ■■Recording mode: Take pictures with automatic shutter speed and aperture value settings. Using the [Rec] menu to change settings and set up your own recording environment. Set mode dial to [ ] ([Program AE] Mode) Take a picture Press halfway (press lightly to focus) Press fully (press the button all the way to record) ●●If a warning is displayed about jitter, use [Stabilizer], a tripod, or [Self Timer].
Basics Taking pictures with your own settings [Program AE] Mode Programme Shift The function for maintaining the same exposure (brightness) while changing the shutter speed and aperture value combination is called “Programme Shift”. You can use “Programme Shift” to take pictures by adjusting the shutter speed and aperture value even in [Program AE] Mode. Press the shutter button halfway ••The shutter speed and aperture value are displayed in yellow on the screen.
Basics Taking pictures with your own settings [Program AE] Mode ●●When the camera is turned off, Programme Shift is cancelled. ●●Programme Shift is cancelled if more than 10 seconds pass after Programme Shift is activated. However, the Programme Shift setting is memorised. ●●Depending on the brightness of the subject, Programme Shift may not be activated.
Basics Adjusting focus When [AF Mode] is set to [ ] (1-area-focusing), focus on the AF area in the centre of the picture. If a subject you want to record is not in the centre, follow the steps below.
Basics Recording motion pictures ■■Recording mode: You can record motion pictures with audio (stereo). ••You can record a motion picture to the built-in memory only in [MP4] using the [VGA] setting. Press the motion picture button to start recording Microphones [Rec Format] (→155)/ [Rec Quality] (→155) ●●Do not block the microphones when recording motion pictures. ●●Immediately release the motion picture button after pressing it. ●●You can record motion pictures fitting each recording mode.
Basics Recording motion pictures ■■About the recording format for recording motion pictures This unit can record motion pictures in either AVCHD or MP4 formats. AVCHD: You can record high definition quality images with this format. It is suitable for viewing motion pictures on a high-resolution TV or for saving them to a disc. AVCHD Progressive: The [50p] in [FHD] is a mode that allows motion pictures to be recorded at 1920 x 1080/50p, the highest quality* that complies with the AVCHD standard.
Basics Recording motion pictures ●●If the surrounding temperature is high, or a motion picture is recorded continuously, [ ] is displayed and recording may be stopped halfway through to protect the camera. ●●When using zoom while recording motion pictures, it may take some time to focus. ●●Depending on the environment when recording motion pictures, the screen may turn black for an instant or noise may be recorded because of static electricity, electromagnetic waves, etc.
Basics Recording motion pictures Taking still pictures while a motion picture is being recorded Still pictures can be recorded even while a motion picture is being recorded. Press the shutter button fully during the motion picture recording Still pictures can be taken while a motion picture is being recorded. [Still Picture Size] (→156) 9M 6M 2M Maximum number of pictures 10 pictures ••The clicking sound made when the shutter button is operated may be recorded.
Basics Viewing your pictures When a card is in the camera, pictures are played back from the card. Without a card, pictures are played back from the built-in memory. Press the Playback button ••By holding down the Playback button while the camera is off, you can turn the camera on in playback mode. Press or turn the control dial to select the picture to be displayed ••When you press and hold , the pictures are displayed one after another.
Basics Viewing your pictures Zooming in and viewing “Playback Zoom” Move the zoom lever toward T side Current zoom position ••Each time you move the zoom lever toward the T side, the magnification increases through four levels: 2x, 4x, 8x, and 16x. (The picture quality displayed becomes successively lower.) ••To reduce zoom → Move the zoom lever toward W side. ••Move zoom position → Press .
Basics Viewing your pictures Viewing a list of pictures “Multi Playback” Move the zoom lever toward W side Picture no./Total no. Motion pictures Panorama pictures ••Move the zoom lever toward the W side and you can switch the display methods in the following order: 1-picture screen (full-screen) → 12-picture screen → 30-picture screen → Calendar screen. (Move the lever to the T side to return.
Basics Viewing your pictures Searching and viewing pictures by their recording date [Calendar] Move the zoom lever toward W side several times Use to select recording date and press [MENU/SET] ••Pictures are displayed in Multi Playback (30-picture screen). The cursor will appear on the first picture taken on the selected date. ••You can also select the date with the control dial. ●●Only months when pictures were taken are shown on the calendar screen.
Basics Viewing motion pictures This unit was designed to play motion pictures using the AVCHD, MP4 and QuickTime Motion JPEG formats. Select a picture with the motion picture icon, and press Playback now starts. Motion picture recording time Example: After 29 minutes and 30 seconds: [29m30s] •• After playback starts, the elapsed playback time is displayed on the screen.
Basics Viewing motion pictures Capturing still pictures from motion pictures Save a scene from a motion picture as a still picture. Display the picture that you want to capture as a still picture by pausing a motion picture during playback Press [MENU/SET] ••A confirmation screen is displayed. Select [Yes] and press [MENU/SET] to save the picture. ••Still pictures are saved with [Aspect Ratio] setting of [16:9] and [Picture Size] at 2M*. * In the following cases, saved pictures become [4:3], 0.3M.
Basics Deleting pictures Pictures will be deleted from the card if the card is inserted, or from the built-in memory if the card is not inserted. (Deleted pictures cannot be recovered.) However, pictures will not be deleted in the following cases: ••Protected pictures ••Card switch is in “LOCK” position. ••Pictures that are not based on the DCF standard (→53) Press [ ] button to delete displayed picture ••A confirmation screen is displayed. Select [Yes] and press [MENU/SET].
Basics Deleting pictures To delete multiple (up to 100)/To delete all pictures A picture group (→160) is handled as 1 picture. (All the pictures in the selected picture group are deleted.) Press [ ] button while viewing a picture Use to select [Delete Multi]/[Delete All] and press [MENU/SET] ••Items can also be selected by turning the control dial. ●●[Delete Multi] Use to select picture and press [DISP.] button Picture selected ••To cancel → Press [DISP.] button again.
Basics Setting the menu Refer to the procedure below for an example on how to operate the menus. Example: Changing [AF Mode] in the [Rec] menu in [Program AE] Mode Press [MENU/SET] Press or turn the control dial to select the [Rec] menu, and press [MENU/SET] Press or turn the control dial to select [AF Mode], and press [MENU/SET] Pages (The pages can also be selected with the zoom lever.
Basics Setting the menu Menu type ●●In recording mode ●●In playback mode [Rec] You can perform settings such as tones, Sensitivity, Aspect Ratio, and Picture Size. [Motion Picture] You can select the recording format and picture quality and other settings. [Setup] You can perform settings for convenience of use such as the clock setting and changing of the beep sounds. [Wi-Fi] You can perform settings required to use a Wi-Fi connection and Wi-Fi functions.
Basics Using the [Setup] menu [Clock Set] and [Economy] are important for clock setting and battery life. Please check these before use. ••For the setting procedures of the menu. (→61) ●●In [Intelligent Auto] Mode, only [Clock Set], [World Time], [Airplane Mode], [Beep], [Composition Guide] and [Language] are set. [Clock Set] Set time, date, and display format. (→29) [World Time] Set the local time at travel destination. (→140) [Travel Date] Record the number of days elapsed in your travels.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Beep] Change or mute the beep/shutter sounds. ●●[Beep Level] ■■Settings: ●●[Beep Tone] ■■Settings: ([Low]) / / ([High]) / ([OFF]) ([High]) / ([OFF]) / ●●[Shutter Vol.] ■■Settings: ●●[Shutter Tone] ■■Settings: ([Low]) / / / ■■Beep sounds when operating the control ring Beep sounds are audible when turning the control ring.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Cust.Set Mem.] Register the current camera settings. (→132) [Fn Button Set] Register frequently used functions from the [Rec] menu, [Setup] menu or other menus to the function buttons for faster operation. (→134) [Zoom Lever Set] Switches the zoom lever operation setting. (→84) ■■Settings [Zoom] [Step Zoom] The zoom operates in the normal way.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Live View Mode] Sets the display speed and picture quality of the screen (Live View screen) when recording pictures using the LCD monitor or viewfinder. ■■Settings [30fps] Picture quality has higher priority over display speed and pictures are displayed at 30 fps. For example, use when you want to record a comparatively slow-moving subject while confirming the focusing.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Monitor Luminance] Make LCD monitor easier to see. ■■Settings [Auto Power Monitor] [Power Monitor] The brightness is adjusted automatically depending on how bright it is around the camera. The brightness becomes higher than usual for easy viewing outdoors. [OFF] — ●●Cannot select [Auto Power Monitor] in playback mode. ●●[Power Monitor] returns to ordinary brightness if there is no operation for 30 seconds when recording.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Histogram] Displays distribution of brightness in picture – e.g. if the graph peaks at the right, this means there are several bright areas in the picture. A peak in the centre represents correct brightness (correct exposure). This can be used as a reference for exposure correction, etc.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Remaining Disp.] Switch the display between the remaining number of still pictures you can take or the remaining recording time of a motion picture that you can record for the available card or built-in memory. ■■Settings This will display the number of recordable pictures for still pictures. This will display the available recording time for motion pictures.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Economy] Turn off the camera or make the LCD monitor go dark while not using the camera to minimise battery consumption. ●●[Auto Power Off] The camera is automatically turned off while not in use. ■■Settings: [2MIN.] / [5MIN.] / [10MIN.] / [OFF] ●●When you want to use the camera again, turn the camera back on.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Auto Review] Automatically display still pictures immediately after taking them. ■■Settings [1SEC] / [2SEC] Displays the playback screen for the set time before automatically returning to the recording screen. [HOLD] Keeps the automatic playback screen displayed until [MENU/SET] is pressed. [OFF] — ●●For [Intelligent Auto] Mode, the setting is fixed to [2SEC].
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [No.Reset] Reset picture file numbers. (The folder number is updated and the file number starts from 0001.) ••To reset folder number to 100: First, format the built-in memory or card, and reset the file numbers using [No.Reset]. Then, select [Yes] on the folder number reset screen. ●●A folder number between 100 and 999 can be assigned. Numbers cannot be reset once folder number reaches 999.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [USB Mode] Select communication method for when connecting camera to a computer or printer with USB connection cable (supplied). ■■Settings [Select on connection] [PictBridge(PTP)] Select communication method each time you connect to a computer or PictBridge-compatible printer. Select when connecting to a PictBridge-compatible printer. Select when connecting to a computer.
Basics Using the [Setup] menu ●●[VIERA Link] Enable automatic linking with other VIERA Link-compatible devices, and operability with a VIERA remote control when connecting via an HDMI micro cable. (→263) ■■Settings [ON] Operations may be performed via the remote control of the VIERA Link-compatible device. •• Not all operations will be available. •• Operability of the camera’s own buttons will be limited. [OFF] Operations must be performed via the camera’s own buttons.
Basics Using the [Setup] menu ••For the setting procedures of the menu. (→61) [Version Disp.] Check the camera firmware version or display software information. ●●When you press [MENU/SET] while the version is displayed, software information such as the licence is displayed. [Format] Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting the built-in memory or card. When a card/built-in memory is formatted, the data cannot be restored.
Basics Entering Text Use the cursor button to enter names with the Face Recognition function and in Scene Modes [Baby] and [Pet], or to register locations in [Travel Date] etc. Use to select characters Press [MENU/SET] several times until the desired character is displayed Text is inserted at the cursor position. ●●To change the character type ••Press [DISP.] button ••Use to select [ ] and press [MENU/SET].
Application (Record) Switching the display of recording information, etc. You can also turn off the recording information (such as icons for various settings) and the level gauge (→80). You can switch the display, such as turning off the display of information for a simple display, for example when determining the composition. Press [DISP.
Application (Record) Taking pictures with the composition determined [Composition Guide] ■■Recording mode: By using the viewfinder or LCD monitor to consider the placement of your subject (the composition), you can take more impressive still pictures. The following guidelines can be used. Composition name [Rule of Thirds Offset] Guideline Description This composition creates a more interesting photo by offsetting the subject from the centre.
Application (Record) Taking pictures with the composition determined [Composition Guide] ■■How to select guidelines Press [Fn1] button Use to select the guideline to display and press [MENU/SET] ••You can also select the guideline with the control dial. ••Explanations and examples of the composition will be displayed in turn when you press the [DISP.] button. to flip. ••If the guideline allows horizontal flipping, use ••To turn off guideline display, select [No Guide].
Application (Record) Using the level gauge ■■Recording mode: If you want to make sure that the camera is not slanted or tilted, for example, when you take a picture of a landscape, use the level gauge indication as a reference. Press [DISP.] button to switch the display Press the button to switch the display. Press the button until the level gauge is displayed. Correct camera angle ■■Using the level gauge The yellow line indicates the current angle.
Application (Record) Using Zoom ■■Recording mode: You can adjust the area of a picture to be taken using zoom. Move the zoom lever Capture a wider area (wide-angle) Enlarge the subject (telephoto) •• The zoom speed can be set to one of 2 levels using the angle at which the zoom lever is moved. When Extra optical zoom is set Focus range Zoom ratio Digital Zoom range Optical Zoom range Zoom bar i.Zoom range ••The illustration is an example of when using Extra optical zoom, [i.
Application (Record) Using Zoom ●●If you are not holding the camera while using zoom, such as during self-timer recording (→106), [Time Lapse Shot] recording (→150), or remote recording (→203), the camera could tilt when the lens barrel extends, so be sure to secure the camera in place on a tripod or by other means. ●●Do not touch the lens barrel during zooming. ●●Adjust the focus after adjusting the zoom. ●●The zoom ratio and the zoom bar displayed on the screen are estimates.
Application (Record) Using Zoom To increase the zoom ratio further, the following zoom can be used in combination. ■■[i.Zoom] You can use the camera’s Intelligent Resolution technology to increase the zoom ratio up to 2x higher than the original zoom ratio with limited deterioration of picture quality. Set the [i.Zoom] in the [Rec] menu to [ON]. (→149) ●●The camera’s Intelligent Resolution technology is applied to a picture in the zoom range of [i.Zoom]. ●●[i.
Application (Record) Using Zoom [Step Zoom] You can set the zoom operation to allow easy visualisation of the angle of view (picture angle) for the focal length of a regular fixed focal length lens (as with a 35 mm film camera). When using the Step Zoom, you can operate the zoom ratio as easily as changing the camera lens. ••If recording in [Intelligent Auto] Mode, you can adjust the [Step Zoom] with the control ring/control dial.
Application (Record) Using Zoom ●●When using [Step Zoom], the focal length displayed is an estimate. It is based on the [Aspect Ratio] setting of 4:3.
Application (Record) Taking pictures with flash ■■Recording mode: Press [ ] button ( ) Use to select the desired type and press [MENU/SET] Type, operations ∗1 Uses [Auto] •• Automatically judges when to use flash Normal use [Auto/Red-Eye]∗2 •• Automatically judges when to use flash (reduces red-eye) Taking pictures of subjects in dark places [Forced Flash On] •• Always uses flash Taking pictures with backlight or under bright lighting (e.g. fluorescent) [Slow Sync.
Application (Record) Taking pictures with flash ●●Do not put your hands over the light-emitting area of the flash (→11) or look at it from close range. Do not use the flash at close distances to other subjects (heat/light may damage subject). ●●The effect of red-eye reduction varies depending on the subject and is affected by factors such as distance to the subject, whether the subject is looking at the camera during preliminary flash, and so on.
Application (Record) Taking pictures with flash ■■Available types in each mode (○: Available, –: Not available, : Default setting) [Scene Mode] ○∗1 ○ ○ ○ ○ – – – ○ ○ ○ – ○ ○ ○ ○ ○ ○ ○ – – – ○ ○ ○ – – – ○ ○ ○ ○ ○ – ○ – ○ ○ ○ – – – ○ ∗1 Set to [ ], [ ], [ ] or [ ] depending on the subject and brightness. ••The flash cannot be used when recording motion pictures or in the [ [ ], [ ], [ ], [ ], [ ], and [ ] Scene Modes.
Application (Record) Taking pictures with Auto Focus ■■Recording mode: When Auto Focus is enabled, press the shutter button halfway to focus. Focusing methods differ depending on recording mode and [AF Mode] setting. Press [ ] button ( ) Use to select [AF] and press [MENU/SET] ■■Switching [AF Mode] Select [AF Mode] from the [Rec] menu ••For the setting procedures of the menu.
Application (Record) Taking pictures with Auto Focus Taking front-on pictures of people (Face Detection) Recognises faces (up to 15 people) and adjusts exposure and focus accordingly. AF area Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as faces within the yellow AF area are also focused.
Application (Record) Taking pictures with Auto Focus Automatically locking the focus on a moving subject (AF Tracking) Align the AF Tracking frame with the subject and press the shutter button halfway AF Tracking frame When the subject is recognised, the AF Tracking frame changes from white to yellow, and the subject is automatically kept in focus. If AF Lock fails, a red frame flashes. ••To release AF Tracking → Press [MENU/SET].
Application (Record) Taking pictures with Auto Focus Subject not centred in picture (23-area-focusing) Focuses on the subject in the wide range area (up to 23-area-focusing) on the recording screen. ●●Focus is fixed to [ ] (1-area-focusing) during motion picture recording.
Application (Record) Taking pictures with Auto Focus ■■Changing the position and size of the AF area ([Focus Area Set]) When [AF Mode] is set to [ ] (1-area-focusing), you can move the position or size of the AF area at the centre. Select [AF Mode] from the [Rec] menu and press [MENU/SET] (→61) Use to select [ ] from the [AF Mode] items and press [DISP.
Application (Record) Taking close-up pictures (Macro recording) ■■Recording mode: When you want to enlarge the subject, setting to [AF Macro] ([ ]) enables you to take pictures at an even closer distance than the normal focus range (up to 3 cm (0.098 feet) for max. Wide).
Application (Record) Taking close-up pictures (Macro recording) Focus range When a subject is too close to the camera, the picture may not be properly focused. ■■Shortest recording distance The shortest recording distance is the distance from the lens front to the subject. This distance changes gradually depending on the zoom position. Zoom [Focus Mode] [AF] ) [AF Macro] ( [MF] (→97) Max. W 50 cm (1.6 feet) 3 cm (0.098 feet) 3 cm (0.098 feet) Max. T 200 cm (6.6 feet) 200 cm (6.
Application (Record) Taking close-up pictures (Macro recording) [Macro Zoom] ■■Recording mode: To take even larger images of the subject, setting to [Macro Zoom] ([ subject to appear even larger than when using [AF Macro] ([ ]). ]) enables the Press [ ] button ( ) Use to select [Macro Zoom] ([ ]) and press [MENU/SET] Adjust the magnification with the zoom lever The zoom position is fixed at the Wide end. Focus range is 3 cm (0.098 feet) Return [ Enlarge .
Application (Record) Taking pictures with Manual Focus ■■Recording mode: Manual Focus is convenient when you want to lock the focus to take pictures or when it is difficult to adjust focus using Auto Focus. Press [ ] button ( ) Use to select [MF] and press [MENU/SET] Turn the control ring to adjust focus Focus range indication Focus range ••If [Peaking] is set to [ON], colour is added to the portions of the image that are in focus. (→99) ●●After zoom operation, readjust the focus.
Application (Record) Taking pictures with Manual Focus ■■1 Shot AF When [1 Shot AF] is registered to a function button (→134), press this button once to temporarily turn on Auto Focus and focus on a subject. ••First use [1 Shot AF] to focus on an area close to the subject. This makes it easier to adjust the focus with the control ring.
Application (Record) Taking pictures with Manual Focus ■■[Peaking] Peaking If [Peaking] is set to [ON] in the [Setup] menu, colour is added to the portions of the image that are in focus.
Application (Record) Taking pictures by locking the focus and/or exposure [AF/AE Lock] ■■Recording mode: The AF/AE Lock function is convenient, for example, when there is too much contrast with the subject and you cannot get appropriate exposure (AE Lock) or when you want to take a still picture composed with the subject outside the AF area (AF Lock). Preparation: To execute the AF/AE Lock function, it is necessary to register [AF/AE Lock] to the function button.
Application (Record) Taking pictures with Exposure Compensation ■■Recording mode: Corrects the exposure when there is a backlight or when the subject is too dark or too bright. Press [ ] button ( ) Turn the control ring or control dial to select the compensation value and press [MENU/SET] ••If the picture is too dark, adjust the exposure to the “+” direction. ••If the picture is too bright, adjust the exposure to the “-” direction.
Application (Record) Taking pictures with Exposure Compensation Recording while exposure is changed automatically ([Auto Bracket]) ■■Recording mode: Records 3 pictures in continuous succession while exposure is changed automatically. After exposure adjustment, the adjustment value is set as the standard. Press [ Use ] button ( ) to select [Auto Bracket] and press [MENU/SET] ••To change the compensation margin, press the [DISP.] button and select a compensation margin with .
Application (Record) Burst function ■■Recording mode: A burst of still pictures can be recorded while the shutter button is pressed fully. Press [ Use ] button ( ) to select [Burst] and press [MENU/SET] ••To change the burst setting, press the [DISP.] button and select a setting with Setting *1 Speed Description No. of pictures∗2 Approx. 3 - 10 pictures/sec. •• The burst speed is adjusted automatically in accordance with the movements of people, pets or other subjects.
Application (Record) Burst function Setting ∗2 Speed Description No. of pictures∗1 Approx. 10 pictures/sec. •• Focus, exposure and White Balance are fixed in the first picture. 6 Approx. 40 pictures/sec. •• Focus, exposure and White Balance are fixed in the first picture. •• Note on the picture size setting. 30 Approx. 60 pictures/sec. •• Focus, exposure and White Balance are fixed in the first picture. •• The recordable range is reduced. •• Note on the picture size setting.
Application (Record) Burst function ●●Pictures taken with the [ ] or [ ] setting are recorded together as a group (picture group). (→160) ●●Depending on changes in the brightness of the subject, the second and subsequent pictures may be recorded brighter or darker when using the burst function at the [ ], [ ], [ ] or [ ] setting. ●●Burst speed may be reduced if shutter speed is reduced in darker locations.
Application (Record) Taking pictures with self-timer ■■Recording mode: We recommend using a tripod. This is also effective for preventing jitter when pressing the shutter button, by setting the self-timer to 2 seconds. Press [ Use ] button ( ) to select [Self Timer] and press [MENU/SET] ••To change the time setting, press the [DISP.] button and select a time setting with . Take a picture Press the shutter button fully to start recording after the preset time.
Application (Record) Taking pictures by setting the aperture value [Aperture-Priority] Mode ■■Recording mode: When recording, you can control the aperture value to meet your recording purposes. Shutter speed is automatically adjusted to be appropriate for the set aperture value. Set mode dial to [ ] Turn the control ring or control dial to select the aperture value About the exposure meter Shutter speed (Automatic adjustment) ••Proper exposure is not possible in the range indicated in red.
Application (Record) Taking pictures by setting the shutter speed [Shutter-Priority] Mode ■■Recording mode: When recording, you can control the shutter speed to meet your recording purposes. Aperture is automatically adjusted to be appropriate for the set shutter speed. Set mode dial to [ ] Turn the control ring or control dial to select the shutter speed About the exposure meter Set shutter speed ••Proper exposure is not possible in the range indicated in red.
Application (Record) Taking pictures by setting the aperture value and shutter speed [Manual Exposure] Mode ■■Recording mode: Determine the exposure by manually setting the aperture value and the shutter speed. The Manual Exposure Assistance appears on the lower portion of the screen to indicate the exposure.
Application (Record) Taking pictures by setting the aperture value and shutter speed [Manual Exposure] Mode ■■Manual exposure assist (estimate) Shows pictures with standard brightness (appropriate exposure). Shows brighter pictures. For the appropriate exposure, either use a faster shutter speed or increase aperture value. Shows darker pictures. For the appropriate exposure, either use a slower shutter speed or reduce aperture value.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode ■■Recording mode: You can select your own settings from various effects and take pictures while confirming these effects on the screen. Set mode dial to [ ] Use to select an effect, and then press [MENU/SET] ••If you press the [DISP.] button, an explanation of the effect appears.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode ●●The flash is set to [ ] ([Forced Flash Off]). ●●The display of a picture reflecting a selected effect in the preview screen or recording screen may differ from the actual recorded pictures. ●●A setting that was selected in [Creative Control] mode is retained even after the camera is turned off. ●●Following [Rec] menu settings will be automatically adjusted and cannot be selected manually.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [Expressive] This effect emphasises the colour to make a pop art picture. ■■Items that can be set (→112) Brightness Underexposure (darker) Overexposure (brighter) Degree of background defocusing Defocuses the background The background is in focus as well Vividness Subdued colouring Gaudy colouring [Retro] This effect gives a faded image.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [High Key] This effect adds a bright, airy and soft feel to the overall image.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [Dynamic Monochrome] This effect gives a higher contrast to create an impressive black and white picture.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [Cross Process] This effect gives your photo a dramatic colour look.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [Soft Focus] This effect blurs the overall image to produce a soft feel.
Application (Record) Taking Pictures with different picture effects [Creative Control] Mode For the [Creative Control] menu setting procedures. (→111) [One Point Color] This effect leaves one selected colour to emphasise impressiveness.
Application (Record) Recording panorama pictures [Panorama Shot] Mode ■■Recording mode: You can easily record a panorama picture by panning the camera towards the direction you want to record, and automatically combining the burst of pictures taken during that time. ••The recording direction is set as “left → right” and the picture effect is set to [No Effect] at the time of purchase.
Application (Record) Recording panorama pictures [Panorama Shot] Mode Press the shutter button fully and pan the camera in a small circular motion to the recording direction to start recording ••Taking pictures from left to right 2 sec. 1 sec. Recording direction and progress status (approximate). 3 sec. 4 sec. ••Pan the camera so that you make a complete circuit in approx. 8 seconds - Pan the camera at a constant speed.
Application (Record) Recording panorama pictures [Panorama Shot] Mode ■■Changing the recording direction or picture effects Press Use to select the recording direction and press [MENU/SET] Use to select the picture effect and press [MENU/SET] ■■Tips ••Pan the camera in the recording direction as steadily as possible. If the camera shakes too much, it may not be able to take pictures or may end up creating a narrow (small) panorama picture.
Application (Record) Recording panorama pictures [Panorama Shot] Mode ●●The zoom position is fixed to the W end. ●●The focus, exposure and White Balance are all fixed to optimal values for the first picture. If the focusing or brightness of pictures recorded as part of a Panorama picture after the first picture are significantly different from those of the first picture, the Panorama picture as a whole (when all pictures are stitched together) may not have consistent focus and brightness.
Application (Record) Taking pictures according to the scene [Scene Mode] ■■Recording mode: Using [Scene Mode] enables you to take pictures with optimum settings (exposure, colouring, etc.) for given scenes.
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [Portrait] Improves the skin tone of subjects for a healthier appearance in bright daylight conditions. ■■Tips ••The more the zoom is drawn towards T side and a distant background is selected, the greater the effect will be. [Soft Skin] Smoothes skin colours in bright, outdoor daylight conditions (portraits from chest upwards).
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [Sports] Takes pictures of scenes with fast movement, e.g. sports. ■■Tips ••Stand at least 5 m (16 feet) away. ●●Shutter speed may slow down up to 1 second. [Night Portrait] Takes pictures of people and nightscapes with close to actual brightness. ■■Tips ••Use flash. ••Subject should not move. ••Tripod, self-timer recommended. ●●Shutter speed may slow down up to 4 seconds.
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [Handheld Night Shot] Takes clear still pictures of night scenes with less jitter and less noise by combining a burst of still pictures. ■■Tips ••After the shutter button has been pressed, do not move the camera during the burst operation. ••Stand at least 5 m (16 feet) away.
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [Baby] This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual. ■■To record age and name [Baby1] and [Baby2] can be set separately.
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [High Sens.] Prevents blurring of subject in dark, indoor conditions. Use ■■Settings: to select the aspect ratio, and then press [MENU/SET] [3M] / [2.5M] / [2M] / [2.5M] [Starry Sky] Gives starry skies and dark subjects a clear appearance. Use to select shutter speed, and then press [MENU/SET] ■■Settings: [15 sec.] / [30 sec.] / [60 sec.] ■■Tips ••Tripod, self-timer recommended.
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [High Speed Video] Motion pictures are recorded by greatly increasing frames per second, so movement can be displayed in slow motion during playback.
Application (Record) Taking pictures according to the scene [Scene Mode] ••How to select a scene (→124) [3D Photo Mode] Pictures are recorded continuously while moving the camera horizontally, and two pictures selected automatically are combined to make a single 3D picture. To view 3D pictures, a television that supports 3D is required. (This unit will play back in 2D.) (→265) ••3D still pictures are recorded in MPO format (3D). ••The picture size is fixed to 2M [ ].
Application (Record) Registering your own settings and recording [Custom] Mode Registering your preferred recording mode, [Rec] menu settings, etc. to [Cust.Set Mem.] and setting the mode dial to [ ] / [ ] allows you to switch quickly to those settings. [Cust.Set Mem.] ■■Recording mode: Up to 4 current camera settings can be registered. Select the recording mode you wish to register and set the [Rec] menu, [Motion Picture] menu, [Setup] menu, etc. ••For the setting procedures of the menu.
Application (Record) Registering your own settings and recording [Custom] Mode [Custom] ■■Recording mode: Settings registered in [Cust.Set Mem.] can be quickly called up by setting the mode dial to [ ] / [ ]. Set mode dial to [ ] / [ ] ([Custom] mode) ••When set to [ ] → The camera switches to the recording mode and settings registered in [ ••When set to [ ] → Perform steps - . Use ]. to select custom set ••Use and to confirm the registered settings.
Application (Record) Registering preferred functions to the function button ■■Recording mode: Register frequently used functions from the [Rec] menu, [Setup] menu or other menus to the [Fn1] button or [Fn2] button for faster operation. ••The [Fn1] button is set to [Composition Guide] and [Fn2] button is set to [LVF/Monitor Switch] at the time of purchase.
Application (Record) Changing the settings assigned to the control ring/control dial ■■Recording mode: Changes the settings assigned to the control ring/control dial. Select [Ring/Dial Set] from [Setup] menu and press [MENU/SET] (→61) Use to select [ ] (control ring) or [ ] (control dial) and press [MENU/SET] Use to select the setting and press [MENU/SET] Control ring Control dial [DEFLT] [Default Control] [Zoom] (→81) ••To return to the default setting, select [Default Control].
Application (Record) Recording with the Face Recognition function [Face Recog.] ■■Recording mode: ••Default [Face Recog.] setting is [OFF]. ••When the face pictures are registered, the setting will be [ON] automatically. ■■How the Face Recognition function works During recording ••The camera recognises a registered face and adjusts focus and exposure. ••When registered faces that have set names are recognised, the names are displayed (max. 3 people).
Application (Record) Recording with the Face Recognition function [Face Recog.] Registering face pictures Up to 6 people’s face pictures can be registered along with such information as name and birthdate. You can facilitate Face Recognition by the way you register faces: for example, register multiple face pictures of the same person (up to 3 pictures in one registration). Select [Face Recog.
Application (Record) Recording with the Face Recognition function [Face Recog.] ■■Recording tips when registering face pictures ••Make sure the subject’s eyes are open and mouth closed; have the subject face the camera directly, and make sure the outline of the face, the eyes and eyebrows are not hidden by hair. ••Make sure there are no heavy shadows on the face. (During registration, the flash is not used.
Application (Record) Useful features for travel [Travel Date] If you set your travel schedule and record pictures, the day of your trip on which the picture was taken will be recorded.
Application (Record) Useful features for travel [World Time] Set the recording date and time with the local time at your destination. ••Set [Home] when you use the camera for the first time after purchasing it. You can set [Destination] after setting [Home].
Application (Record) Using the [Rec] menu You can perform settings such as tones, Sensitivity, Aspect Ratio, and Picture Size. ••For the setting procedures of the menu. (→61) [Aspect Ratio] ■■Recording mode: Set the aspect ratio of still pictures. ■■Settings: [ ] / [ ] / [ ] / [ ] ●●Edges may be cut off when printing – be sure to check in advance.
Application (Record) Using the [Rec] menu ●●Mosaic effect may appear depending on subject and recording conditions. ●●Cannot be set in the following cases: ••Scene Modes ([High Sens.], [3D Photo Mode]) ••When [Quality] is set to [ ] ••For the setting procedures of the menu. (→61) [Quality] ■■Recording mode: Set the picture quality. ■■Settings [Fine] [Standard] [RAW+Fine] [RAW+Standard] [RAW] [3D+Fine] [3D+Standard] Gives priority to picture quality and saves pictures in JPEG file format.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [Sensitivity] ■■Recording mode: Set ISO Sensitivity (sensitivity to lighting) manually. We recommend higher settings to take clear pictures in darker locations.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [ISO Limit Set] ■■Recording mode: You can set the upper limit of ISO Sensitivity when [Sensitivity] is set to [AUTO] or [ ]. ■■Settings: [AUTO] / [200] / [400] / [800] / [1600] / [3200] / [6400] ●●This function is disabled during motion picture recording.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [White Balance] ■■Recording mode: Adjust the colour depending on the light source to ensure natural colour. ■■Settings AWB (automatic white balance) (clear sky) Automatic adjustment in accordance with the light source. Adjust to the colour under a clear sky. (cloudy sky) Adjust to the colour under a cloudy sky. (shade) Adjust to the colour in the shade.
Application (Record) Using the [Rec] menu ■■White Balance fine adjustment (excluding [AWB]) White Balance settings can be individually fine-tuned if colours still do not appear as anticipated. Select the White Balance to be fine-tuned, and press the [DISP.] button to display the [WB Adjust.] screen Turn the control ring or the control dial to the right if red is strong and to the left if blue is strong ••You can also press to make adjustments.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [AF Mode] ■■Recording mode: For details (→89). [Quick AF] ■■Recording mode: The focus is automatically adjusted when camera blurring is small even when the shutter button is not pressed. (Increases battery consumption) ■■Settings: [ON] / [OFF] ●●Focus alignment may take time if zoom is suddenly changed from max. W to max. T, or if suddenly moving closer to subject.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [Metering Mode] ■■Recording mode: You can change the position for measuring brightness when correcting exposure.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [Min. Shtr Speed] ■■Recording mode: Sets the minimum value for the shutter speed. We recommend using slower shutter speeds to take brighter pictures in dark locations. ■■Settings: [AUTO] [1/250] [1/125] [1/60] [1/30] [1/15] [1/8] [1/4] [1/2]* [1]* * If the ISO Sensitivity setting is [3200] or [6400], the shutter speed becomes [1/4].
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [Time Lapse Shot] ■■Recording mode: You can preset the recording start time, the recording interval, and the number of pictures to take still pictures automatically. This setting is convenient for taking pictures of landscape scenes, observation of the gradual changes in animals/plants etc., and other applications from a fixed point. The pictures are recorded as a single group picture (→160).
Application (Record) Using the [Rec] menu Press to select [Start Shooting] and press [MENU/SET] Press the shutter button fully ••The recording starts automatically. ••If the recording interval is set to 40 seconds or more, this camera will turn off automatically while in recording standby. The [Time Lapse Shot] recording will continue even if the camera is turned off, and the camera is automatically turned on at the recording start time.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [AF Assist Lamp] ■■Recording mode: Illuminates lamp when dark to facilitate focus alignment. ■■Settings [ON] Lamp illuminated with halfway press of shutter button. ([ [OFF] Lamp is not illuminated. (Taking pictures of animals in the dark, etc.) ] appears.) ●●The AF Assist Lamp has an effective distance of 1.5 m (4.9 feet).
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [Motion Deblur] ■■Recording mode: For details (→38). [iHandheld Night Shot] ■■Recording mode: For details (→39). [iHDR] ■■Recording mode: For details (→40). [Stabilizer] ■■Recording mode: Automatically detects and prevents jitter. ■■Settings: [ON] / [OFF] ●●The setting is fixed to [ON] in [Handheld Night Shot] Scene Mode.
Application (Record) Using the [Rec] menu ••For the setting procedures of the menu. (→61) [Date Stamp] ■■Recording mode: Still pictures can be taken with the recording date and time stamped on the still picture. ■■Settings: [W/O TIME] / [WITH TIME] / [OFF] ●●Do not request date printing in store or make date printing on printer for still pictures with date stamps. (Date printing may be overlapped.) ●●Date stamps on still pictures cannot be erased.
Application (Record) Using the [Motion Picture] menu You can select the recording mode and picture quality and other settings. ••For the setting procedures of the menu. (→61) [Rec Format] ■■Recording mode: Sets the data format of the motion picture that is recorded. ■■Settings [AVCHD] This is a data format suitable for playback on high-definition TVs. [MP4] This data format is suited for playing back motion pictures on a computer and other such devices.
Application (Record) Using the [Motion Picture] menu ■■About motion picture icon [Rec Format] Picture size 50i fps ●●What is bit rate Bit rate is the volume of data for a definite period of time, and the quality becomes higher when the number gets bigger. This unit uses the “VBR” recording method. “VBR” is an abbreviation of “Variable Bit Rate”, and the bit rate (volume of data for definite period of time) is changed automatically depending on the subject to record.
Application (Record) Using the [Motion Picture] menu ••For the setting procedures of the menu. (→61) [Continuous AF] ■■Recording mode: Either allow the focus to be constantly adjusted during motion picture recording, or fix the focus position at the start of recording. ■■Settings [ON] [OFF]: Fix focus position at the start of motion picture recording.
Application (Record) Using the [Motion Picture] menu ••For the setting procedures of the menu. (→61) [Wind Cut] ■■Recording mode: Automatically detects wind sounds (wind noise) captured by the microphones and suppresses the sound if the wind is blowing too strongly. ■■Settings [AUTO]: Wind noise is automatically suppressed depending on volume. [OFF] ●●When [Wind Cut] is set to [AUTO], the sound quality may differ from that of normal recordings.
Application (View) Changing the picture information display, etc. You can disable the display of picture information (file number, etc.) and recording information (settings used for recording, etc.) when a picture is played back. Press [DISP.] button to change display Has picture information (recording date and time, etc.) Has recording information ([Flash], [Sensitivity] etc.
Application (View) Viewing the group picture You can consecutively play back multiple pictures in a group or play back group pictures one by one. [ ]: Group pictures recorded consecutively by setting [Burst] to [ ] or [ ] (→103) [ ]: Group pictures recorded using [Time Lapse Shot] (→150) A representative picture (the first picture in a group) is displayed when it is displayed together with other still pictures or with motion pictures. ••You can delete or edit pictures in group units.
Application (View) Viewing the group picture ■■Playing back group pictures one by one Select a picture with the group picture icon ([ ] or [ ]), and press Use to scroll through the pictures ••Press again to return to the normal playback screen. ••You can use the same operations for pictures stored in a group as in normal still picture playback. (Multi Playback, Playback Zoom, deletion of pictures, etc.
Application (View) Viewing the group picture ●●If only one still picture is left over in a picture group after deletion or other operations, it will not be formed into a group. ●●Burst pictures will not be grouped if recorded without setting the clock. ●●Not all pictures in a picture group can be displayed at the same time during [Favorite] playback with [Slide Show] or [Filtering Play]. ●●The following operation cannot be performed while a representative picture is being displayed.
Application (View) Different playback methods [Playback Mode] Recorded pictures can be played back in a variety of ways. To change the playback mode, refer to and perform the following steps. Press [MENU/SET] in playback mode The menu selection screen is displayed. Use to select [Playback Mode] menu and press [MENU/SET] Use to select the playback mode and press [MENU/SET] [All] Plays back all pictures. (→53) [2D/3D Settings] Switches the output format between 2D and 3D pictures.
Application (View) Selecting pictures to play back [Filtering Play] You can narrow down the pictures to be displayed with set filters, such as recording dates, categories, or favourite pictures. Select [Filtering Play] from the [Playback Mode] menu (→163) Use to select the filtering method and press [MENU/SET] [Picture Only] Play back still pictures. (→165) [Video Only] Play back motion pictures. (→165) [3D Play] Play back only 3D still pictures.
Application (View) Selecting pictures to play back [Filtering Play] Narrowing down by selecting picture type Select picture type, such as still pictures only or motion pictures only, then play them back. Select [Picture Only] / [Video Only] / [3D Play] in [Filtering Play] and press [MENU/SET] (→164) [Picture Only] Play back still pictures.
Application (View) Selecting pictures to play back [Filtering Play] Narrowing down by selecting picture category or a person in the picture Play back pictures that have been narrowed down by category, such as Scene Mode. Also, from among the pictures recorded using the Face Recognition function (→136), select a person in the picture and play back. Select [Category Selection] in [Filtering Play] and press [MENU/SET] (→164) Use to select the setting and press [MENU/SET] [Face Recog.
Application (View) Selecting pictures to play back [Filtering Play] Narrowing down by selecting recording date Select the recorded date, and play the pictures back. Select [Select Date] in [Filtering Play] and press [MENU/SET] (→164) Use to select recording date and press [MENU/SET] ■■To change the date to display Press Use in the 1-picture Playback screen to select [Change Date] and press [MENU/SET] ●●Only months when pictures were taken are shown on the calendar screen.
Application (View) Playing back pictures in order automatically [Slide Show] Automatically play pictures in order. Recommended when viewing on TV screen. Select [Slide Show] from the [Playback Mode] menu (→163) Use to select [Start] and press [MENU/SET] ■■To select pictures for automatic play back If you have previously selected the pictures to display in [Filtering Play] of the [Playback Mode] menu, the Slide Show will play back the same pictures.
Application (View) Playing back pictures in order automatically [Slide Show] ■■Operations during Slide Show ●●Cursor button The operation guide appears on the bottom right on the screen. Pause/Play Volume down Next Previous Volume up Stop ••If you do not perform any operation for approx. 2 seconds, the operation guide is turned off. To display the guide again, press the [DISP.] button.
Application (View) Searching by recording date [Calendar] You can search for pictures by the date they were recorded. Select [Calendar] from the [Playback Mode] menu (→163) Use to select recording date to display ••Only months when pictures were taken are shown on the calendar screen.
Application (View) Retouching pictures [Auto Retouch] You can adjust the colour and brightness of a still picture to bring them into balance. ••New pictures are created after editing pictures with [Auto Retouch]. Before starting to edit, make sure that there is enough free space in the built-in memory or on the memory card.
Application (View) Retouching pictures [Creative Retouch] You can retouch recorded still pictures by selecting the effect that you want to apply. ••New pictures are created after editing pictures with [Creative Retouch]. Before starting to edit, make sure that there is enough free space in the built-in memory or memory card.
Application (View) Retouching pictures Setting Effect [Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama. [Soft Focus] This effect blurs the overall image to produce a soft feel. [Star Filter] This effect transforms pin-points of light into a star effect. [One Point Color] This effect leaves one selected colour to emphasise impressiveness. ••For more information about picture effects. (→113 - 119) ••When you press [DISP.
Application (View) Using the [Playback] menu You can specify picture protection, cropping, print settings, and other settings for pictures you have taken. ••For the setting procedures of the menu. (→61) ••The setting methods vary depending on the menu item. ●●In the following cases, new pictures are created after they have been edited. Before starting to edit, make sure that there is enough free space in the built-in memory or memory card.
Application (View) Using the [Playback] menu ■■Abort writing location information Press [MENU/SET] while location information is being written ••[ ] is displayed for the period of the abort operation. If selected again while [ ] is displayed, writing location information will resume where it left off.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Title Edit] You can give titles, etc. to your favourite still pictures. Use to select [SINGLE] or [MULTI] and press [MENU/SET] Select a still picture ●●[SINGLE] ●●[MULTI] Use to select a still picture and press [MENU/SET] (up to 100 pictures with the same text) Use to select a still picture and press [DISP.] button [Title Edit] setting [Title Edit] already set •• To cancel → Press [DISP.] button again.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Text Stamp] You can stamp the recording date and time, names, travel destination, travel dates, etc. on the recorded still pictures. Use to select [SINGLE] or [MULTI] and press [MENU/SET] Select a still picture ●●[SINGLE] ●●[MULTI] (up to 100 pictures) Use to select a still picture and press [MENU/SET] Use to select a still picture and press [DISP.
Application (View) Using the [Playback] menu ■■Items that can be stamped [Shooting Date] [Name] [W/O TIME]: Stamp recording date [WITH TIME]: Stamp recording date and time : Stamp name registered in Face Recognition : Stamp name registered in [Baby] or [Pet] [Location] Stamp location registered in [Setup] menu’s [Travel Date] [Travel Date] Stamp number of days that have elapsed since the travel date set in [Setup] menu’s [Travel Date] [Title] Stamp text registered in [Title Edit] ••Items set to [OF
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Video Divide] A single motion picture can be split into 2 parts. This function is convenient when you are travelling, for example, and you just want to keep necessary scenes, or you wish to delete unnecessary scenes to free up space on the built-in memory or your card.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Time Lapse Video] You can create a motion picture from the pictures in a group that was recorded using [Time Lapse Shot]. The motion picture you created is saved in the MP4 recording format.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Resize] Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc. (Still pictures recorded at the smallest recording pixel level cannot be further reduced.) ■■[SINGLE] Use to select [SINGLE] and press [MENU/SET] Use to select a still picture and press [MENU/SET] Use to select size and press [MENU/SET] Current size Size after change ••Confirmation screen is displayed.
Application (View) Using the [Playback] menu ■■[MULTI] Use to select [MULTI] and press [MENU/SET] Use to select size and press [MENU/SET] Use to select a still picture and press [DISP.] button (up to 100 pictures) Number of pixels before/after resizing Resize setting •• To cancel → Press [DISP.] button again. •• To execute → Press [MENU/SET]. ••Confirmation screen is displayed. If you select [Yes], the operation is executed. ●●Picture quality is reduced after resizing.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Cropping] Enlarge your still pictures and crop unwanted areas. Use to select a still picture and press [MENU/SET] Select area to crop and press [MENU/SET] Expand Change position ••Confirmation screen is displayed. If you select [Yes], the operation is executed. ••You can also enlarge the still picture with the control dial.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Favorite] By labelling your favourite pictures with a star ( ), you can play back your favourite pictures only, or you can delete all pictures except your favourites. Up to 999 pictures can be set as favourites.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Print Set] Picture/picture no./date printing settings can be made for when printing with DPOF printcompatible shops or printers. (Ask at the shop to check for compatibility.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Protect] Set protection to disable picture deletion. Prevents deletion of important pictures. Use to select [SINGLE] or [MULTI] and press [MENU/SET] Use ●●[SINGLE] to select picture and press [MENU/SET] ●●[MULTI] Picture protected Picture protected ••To cancel → Press [MENU/SET] again.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Face Rec Edit] Edit or delete the recognition information for pictures with mistaken Face Recognition. Use to select [REPLACE] or [DELETE] and press [MENU/SET] Use to select picture and press [MENU/SET] Use to select a person and press [MENU/SET] ••If [DELETE], go to step . ••People whose Face Recognition information has not been registered cannot be selected.
Application (View) Using the [Playback] menu ••For the setting procedures of the menu. (→61) [Copy] You can copy pictures between built-in memory and memory card. Use to select the copy method (direction) and press [MENU/SET] : Copy all pictures from built-in memory to card (go to step : Copy 1 picture at a time from card to built-in memory. Use Use ). to select picture and press [MENU/SET] to select [Yes] and press [MENU/SET] ••To cancel → Press [MENU/SET].
Wi-Fi/NFC Wi-Fi® Function and NFC Function ■■Use the camera as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device.
Wi-Fi/NFC Wi-Fi® Function and NFC Function ■■About the Wi-Fi connection lamp Wi-Fi connection lamp Lit blue: When the Wi-Fi function is ON Blinking blue: When sending data ■■About the [Wi-Fi] button ●●If you press the [Wi-Fi] button before a Wi-Fi connection is established, you can connect a smartphone/tablet directly to this unit. (→194) At this time, if you press the [DISP.] button, you can perform the following operations.
Wi-Fi/NFC Wi-Fi® Function and NFC Function ●●The camera cannot be used to connect to a public wireless LAN connection. ●●Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point. ●●We recommend that you use a fully charged battery when you send pictures. ●●When the battery indicator is flashing red, the connection with other equipment may not start or the connection may be disrupted. (A message such as [Communication error] is displayed.
Wi-Fi/NFC What you can do with the Wi-Fi function Operating the camera using a smartphone/tablet Taking pictures via a smartphone/tablet (remote recording) (→203) Playing back pictures in the camera on a smartphone/tablet (→204) Saving pictures in the camera to the smartphone/tablet (→204) Sending pictures in the camera to social networking services (→207) Adding location information to pictures in the camera (→208, 211) Connect easily, transfer pictures easily You can easily use the Wi-Fi function by pr
Wi-Fi/NFC Operating the camera using a smartphone/tablet You can remotely operate the camera using a smartphone. The “Panasonic Image App” (hereafter “Image App”) must be installed on your smartphone. Installing the smartphone/tablet app “Panasonic Image App” The “Image App” is an application provided by Panasonic that allows your smartphone to perform the following operations of a Wi-Fi-compatible LUMIX. For Android™ apps For iOS apps Supported OS Android 2.3.3 or later* iOS 6.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Connecting to a smartphone/tablet You can easily establish a Wi-Fi connection on this unit without entering a password on your smartphone. [Wi-Fi Password] is set to [OFF] at the time of purchase. In [OFF] state, a third party can tap into the Wi-Fi transmission and steal transmitted data. To set [Wi-Fi Password] to [ON], refer to (→196). Preparation: Install “Image App” in advance.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Operate the smartphone ••When a connection is established, a message indicating the successful connection will be displayed on the smartphone screen. (It may take some time after the operation for the connection to be established.) ••The connection method differs depending on the smartphone used.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Start “Image App” (→193) Select [ ] Select the SSID displayed on this unit •• When the connection confirmation screen appears on this unit, select [Yes] and press [MENU/SET]. (Only when making a connection for the first time.) ■■Setting a password When [Wi-Fi Password] is set to [ON] (→259), you can strengthen security by using manual input or a QR code for password authentication.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Install the profile The message is displayed in the Web browser. •• If a passcode is required to unlock the smartphone, you will have to input the passcode.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ●●When reading a QR Code to connect Start “Image App” (→193) Select [ ] Read the QR Code displayed on this unit with “Image App” ••The smartphone camera may not be able to read the QR code successfully depending on its quality. If you cannot use the QR code, connect the smartphone to this unit using SSID and a password.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Changing the connection method Press [Wi-Fi] button Press [DISP.] button Select [New Connection] and press [MENU/SET] Select [Remote Shooting & View] and press [MENU/SET] Press [DISP.] button When [Wi-Fi Password] is [OFF]. When [Wi-Fi Password] is [ON].
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Closing the connection After use, close the connection with the smartphone. When the connection is cancelled, you will be able to record and play back pictures on the camera as normal. (On the camera) Press [Q.MENU/ ] button ••A confirmation screen is displayed. Select [Yes] and press [MENU/SET].
Wi-Fi/NFC Operating the camera using a smartphone/tablet Connecting to a smartphone/tablet using NFC function Using the NFC (Near Field Communication) function, the camera and a smartphone can easily exchange the information needed to establish a Wi-Fi connection. Compatible models: This function can be used with NFC compatible devices with Android (2.3.3 or above).
Wi-Fi/NFC Operating the camera using a smartphone/tablet Start “Image App” on your smartphone Hold the smartphone close to the [ ] on this unit ••It may take some time to complete the connection. ••When the connection is complete, live images captured by the camera will be displayed on your smartphone. ••If you connect during playback of one picture, it will be transferred to the smartphone. (→205) Hold the smartphone close to this area (within 5 mm (0.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ●●You can register up to 20 smartphones. If the number of registered smartphones exceeds 20, registrations will be deleted starting from the smartphone touched first. ●●If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted. ●●If the communication environment is bad, the NFC function may not be usable. ●●If there is not a response immediately, shift the position slightly.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Playing back pictures in the camera on a smartphone/tablet Connect to a smartphone (→194) Select [ ] from “Image App” ••The images captured by the camera are displayed on the smartphone. ••When the picture is touched, it is played back at a larger size. Saving pictures in the camera to the smartphone/tablet Connect to a smartphone (→194) Select [ ] from “Image App” ••The images captured by the camera are displayed on the smartphone.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Easily transferring pictures in the camera You can establish a Wi-Fi connection using the NFC function and easily transfer over Wi-Fi the picture on display simply by holding the smartphone close to the camera. Pictures can be transferred as soon as they are recorded, so you can easily transfer them to your friends’ and family’s smartphones.* * “Image App” must be installed to use this function.
Wi-Fi/NFC Operating the camera using a smartphone/tablet On the camera, play back the picture you wish to transfer to a smartphone Start “Image App” on the smartphone you are transferring the picture to Hold the smartphone close to the [ ] on this unit ••It may take some time to complete the connection. ••If you are transferring multiple pictures, repeat steps cannot be transferred in one batch.) and . (Multiple pictures Hold the smartphone close to this area (within 5 mm (0.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Sending pictures in the camera to social networking services Connect to a smartphone (→194) Select [ ] from “Image App” ••The images captured by the camera are displayed on the smartphone. Press and hold the picture and drag it to send it to the social networking service, etc. Switch the location of the pictures to be displayed ••The picture will be sent to the social networking service or other WEB services.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Adding location information to a picture in the camera that is being played back You can use the NFC function to write location information obtained with your smartphone to a picture that is being played back.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Writing location information to a picture Preparations: (On the camera) Set [NFC Operation] to [ON] (→259) (On your smartphone) Start “Image App” Select [ ] Select [ ] Play back the recorded pictures (→53) Hold the smartphone close to the [ ] on this unit ••The location information is written to the picture being played back. ••Writing the location information may take several minutes.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ●●Caution: Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use this function. Use at your own risk.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Adding location information to pictures in the camera You can write the location information acquired on your smartphone to a picture recorded in the camera on the same date/time using the Wi-Fi function.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Writing location information to a picture Preparations: (On the camera) Connect to a smartphone (→194) Operate the smartphone Start “Image App” Select [ ] Select [ ] Select [ ] ••Follow the messages on the screen to perform the operation. ••[ ] is displayed for pictures that have location information written to it. ••You can also use [Location Logging] in the [Playback] menu to write the sent location information to the pictures.
Wi-Fi/NFC Operating the camera using a smartphone/tablet Operating the camera to send pictures to a smartphone or tablet ■■Sending method, and pictures that can be sent JPEG RAW MP4 AVCHD 3D Sending a picture each time one is recorded [Send Images While Recording] ○ – – – – Sending selected pictures [Send Images Stored in the Camera] ○ – ○ – – ••Some images may not be played back or sent depending on the device.
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Sending a picture each time one is recorded ([Send Images While Recording]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images While Recording] and press [MENU/SET] Use cursor button to select [Smartphone] and press [MENU/SET] (Continued on the next page) - 214 - SQW0206
Wi-Fi/NFC Operating the camera using a smartphone/tablet Select [Via Network] or [Direct] and press [MENU/SET] ●●When connecting with [Via Network] (On the camera) Connect the camera to a wireless access point (→250) (On your smartphone) Set Wi-Fi function to “ON” Select the wireless access point you connected to the camera, and set Start “Image App” (→193) ●●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct] (On the camera) Connect the camera to a smartphone (→253) (On your sma
Wi-Fi/NFC Operating the camera using a smartphone/tablet ■■Sending selected pictures ([Send Images Stored in the Camera]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images Stored in the Camera] and press [MENU/SET] Use cursor button to select [Smartphone] and press [MENU/SET] (Continued on the next page) - 216 - SQW0206
Wi-Fi/NFC Operating the camera using a smartphone/tablet Select [Via Network] or [Direct] and press [MENU/SET] ●●When connecting with [Via Network] (On the camera) Connect the camera to a wireless access point (→250) (On your smartphone) Set Wi-Fi function to “ON” Select the wireless access point you connected to the camera, and set Start “Image App” (→193) ●●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct] (On the camera) Connect the camera to a smartphone (→253) (On your sma
Wi-Fi/NFC Displaying still pictures on a TV You can display still pictures on a TV that is compatible with a DLNA certified digital media renderer (DMR) function. Preparations: Set the TV to DLNA waiting Mode. ••Read the operating instructions for your TV.
Wi-Fi/NFC Wireless printing You can send still pictures to a compatible printer and print them wirelessly. ■■Sending method, and pictures that can be sent JPEG RAW MP4 AVCHD 3D ○ – – – – Sending selected pictures [Send Images Stored in the Camera] ••Some images may not be played back or sent depending on the device. ••For more details about picture sending methods. (→257) Preparation: ••You can print out recorded still pictures wirelessly from a PictBridge (wireless LANcompatible)* printer.
Wi-Fi/NFC Sending pictures to AV equipment Still pictures and motion pictures can be sent to AV equipment in the home (home AV equipment), such as DLNA compatible recorders. You can make a setting so that pictures in the camera can be sent to AV equipment automatically while the camera battery is charging.
Wi-Fi/NFC Sending pictures to AV equipment ■■Sending a picture each time one is recorded ([Send Images While Recording]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images While Recording], and then press [MENU/SET] Use cursor button to select [AV device], and then press [MENU/SET] Select [Via Network] or [Direct] to connect (→249) Select the device you wish to connect to ••When the connection is established, the confirmation screen for the tra
Wi-Fi/NFC Sending pictures to AV equipment ■■Sending selected pictures ([Send Images Stored in the Camera]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images Stored in the Camera], and then press [MENU/SET] Use cursor button to select [AV device], and then press [MENU/SET] Select [Via Network] or [Direct] to connect (→249) Select the device you wish to connect to ••When the connection is established, the confirmation screen for the transmission
Wi-Fi/NFC Sending pictures to a PC Still pictures and motion pictures recorded by the camera can be sent to a PC. You can make a setting so that pictures in the camera can be sent to a PC automatically while the camera battery is charging.
Wi-Fi/NFC Sending pictures to a PC ■■To create a folder that receives images ••Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. ■■When using “PHOTOfunSTUDIO” Install “PHOTOfunSTUDIO” on the PC ••“PHOTOfunSTUDIO” is not compatible with Mac.
Wi-Fi/NFC Sending pictures to a PC ■■Sending a picture each time one is recorded ([Send Images While Recording]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images While Recording] and press [MENU/SET] Use cursor button to select [PC] and press [MENU/SET] Select [Via Network] or [Direct] to connect (→249) Select the PC you want to connect to ••If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer name
Wi-Fi/NFC Sending pictures to a PC ■■Sending selected pictures ([Send Images Stored in the Camera]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images Stored in the Camera], and then press [MENU/SET] Use cursor button to select [PC] and press [MENU/SET] Select [Via Network] or [Direct] to connect (→249) Select the PC you want to connect to ••If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer name (f
Wi-Fi/NFC Sending pictures to a PC ●●Folders sorted by the sent date are created in the specified folder, and pictures are saved in those folders. ●●If the screen for a user account and password entry appears, enter the one you set on your PC. ●●If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the name may not be properly recognised.
Wi-Fi/NFC Using WEB services Through “LUMIX CLUB”, you can send still pictures and motion pictures to social networking services, etc. By selecting the setting to automatically transfer still pictures and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures and motion pictures on a PC or a smartphone. You can make a setting so that pictures in the camera can be sent to a WEB service or cloud synchronisation service automatically while the camera battery is charging.
Wi-Fi/NFC Using WEB services When sending images to WEB service ■■Sending method, and pictures that can be sent JPEG RAW MP4 AVCHD 3D Sending a picture each time one is recorded [Send Images While Recording] ○ – – – ○ Sending selected pictures [Send Images Stored in the Camera] ○ – ○ – ○ ••Some images may not be played back or sent depending on the device. ••For details about playback of pictures, check the WEB service to which you will send the pictures.
Wi-Fi/NFC Using WEB services ●●Images uploaded to the WEB service cannot be displayed or deleted with this camera. Check images by accessing the WEB service with your smartphone or computer. ●●If sending images fails, a report email outlining the failure will be sent to the email address registered with “LUMIX CLUB”. ●●Images may contain personal information that can be used to identify the user, such as a title, the time and date when the images were taken, and the location where the image was taken.
Wi-Fi/NFC Using WEB services ■■Using WEB services When sending images to WEB services, such as Facebook or YouTube, the WEB service being used must be registered with the “LUMIX CLUB”. Registering multiple WEB services will send images to all services simultaneously. ••Check the “FAQ/Contact us” on the following site for compatible WEB services. http://lumixclub.panasonic.
Wi-Fi/NFC Using WEB services ■■Sending a picture each time one is recorded ([Send Images While Recording]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images While Recording], and then press [MENU/SET] Use cursor button to select [Web service], and then press [MENU/SET] Select [Via Network] and connect (→250) Select a WEB service you want to connect ••When the connection is established, the confirmation screen for the transmission setting is di
Wi-Fi/NFC Using WEB services ■■Sending selected pictures ([Send Images Stored in the Camera]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images Stored in the Camera], and then press [MENU/SET] Use cursor button to select [Web service], and then press [MENU/SET] Select [Via Network] and connect (→250) Select a WEB service you want to connect ••When the connection is established, the confirmation screen for the transmission setting is displayed.
Wi-Fi/NFC Using WEB services When sending images to [Cloud Sync. Service] ■■Sending method, and pictures that can be sent JPEG RAW MP4 AVCHD 3D Sending a picture each time one is recorded [Send Images While Recording] ○ – – – ○ Sending selected pictures [Send Images Stored in the Camera] ○ – ○ – ○ ••Some images may not be played back or sent depending on the device. ••See the operating instructions of the destination device for more information about picture playback.
Wi-Fi/NFC Using WEB services ■■Sending a picture each time one is recorded ([Send Images While Recording]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images While Recording], and then press [MENU/SET] Use cursor button to select [Cloud Sync.
Wi-Fi/NFC Using WEB services ■■Sending selected pictures ([Send Images Stored in the Camera]) Select [New Connection] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Send Images Stored in the Camera], and then press [MENU/SET] Use cursor button to select [Cloud Sync.
Wi-Fi/NFC Using “LUMIX CLUB” About the “LUMIX CLUB” Acquire a “LUMIX CLUB” login ID (free). If you register this unit to the “LUMIX CLUB”, you can synchronise images between the devices you are using, or transfer these images to WEB services. Use the “LUMIX CLUB” when uploading pictures to WEB services. ••You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (→240) Refer to the “LUMIX CLUB” site for details. http://lumixclub.panasonic.
Wi-Fi/NFC Using “LUMIX CLUB” Select the method for connecting to a wireless access point, and set ••For details (→250). ••The settings screen will only appear during the first connection. Connection methods set on this unit are stored and will be used for subsequent connections. If you want to change the wireless access point to connect to, press the [DISP.] button, then change the connecting destination. Read through the “LUMIX CLUB” terms of use and select [Agree] ••You can press to switch pages.
Wi-Fi/NFC Using “LUMIX CLUB” ■■Using a previously acquired login ID/confirming and changing login ID and password ([Set Login ID]) Preparation: To use a previously acquired login ID, confirm your ID and password. To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” website from your smartphone or PC and change the “LUMIX CLUB” password in advance.
Wi-Fi/NFC Using “LUMIX CLUB” ■■To set the same login ID for the camera and the smartphone/tablet ••Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or WEB services. ■■When either this unit or the smartphone/tablet has acquired the login ID Connect this unit to the smartphone (→194) From the “Image App” menu, set the common login ID ••The login IDs for this unit and the smartphone become the same.
Wi-Fi/NFC Using “LUMIX CLUB” ■■Delete your login ID and account from the “LUMIX CLUB” Delete the login ID from the camera when transferring it to another party or disposing of it. You can also delete your “LUMIX CLUB” account. Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [LUMIX CLUB], and press [MENU/SET] Select [Delete account] ••The message is displayed. Select [Next].
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] [Smart Transfer] automatically transfers pictures from your camera to your PC, AV equipment or Cloud Folder. [Auto Transfer] automatically transfers pictures while charging the camera, and [Transfer Now] transfers the recorded pictures immediately.
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] ●●When [Auto Transfer] is set to [ON], the camera automatically uploads recorded pictures. For this reason pictures may be uploaded unintentionally if, for example, you share this unit with other people. Panasonic assumes no responsibility for any damages caused by uploaded images. ●●Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer].
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] Setting [Smart Transfer] The first time you use [Smart Transfer], follow the steps below to make settings. For the second and subsequent times, you can change the settings with [Set Destination] (→247).
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] [Auto Transfer] Automatically transfer pictures during charging. Preparation: Set [Smart Transfer].
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] [Transfer Now] Transfer pictures to the preset destination immediately. Preparation: Set [Smart Transfer]. (→244) Connect the AC adaptor (supplied) and the camera using the USB connection cable (supplied), and plug the AC adaptor (supplied) into the electrical outlet ••Switch to playback mode.
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] [Set Destination] Changes transfer destination of pictures and settings. Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Smart Transfer] and press [MENU/SET] Use cursor button to select [Set Destination] and press [MENU/SET] Use cursor button to select an item and press [MENU/SET] Item Description [Destination] Change the transfer destination. [PC], [Cloud Sync.
Wi-Fi/NFC Transferring pictures automatically [Smart Transfer] [Charge Priority] Set priority to charge or picture transfer. Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET] (→61) Use cursor button to select [Smart Transfer] and press [MENU/SET] Use cursor button to select [Charge Priority] and press [MENU/SET] Use cursor button to select an item and press [MENU/SET] Item Description [ON] Give priority to charging. Pictures are transferred after charging.
Wi-Fi/NFC About connections After selecting the Wi-Fi function and sending destination, select the connection method. If you are out and unable to use your wireless access point, or temporarily connecting to equipment you do not ordinarily use, or in a similar situation, it is convenient to make a direct connection. If you are connecting with the same settings as used previously, you can quickly start using the Wi-Fi function by connecting with [History Connection] or [Favorite Connection].
Wi-Fi/NFC About connections [Via Network] Connecting via a wireless access point Select a connection method to the wireless access point. ••WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the instruction manual of the wireless access point.
Wi-Fi/NFC About connections ■■If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. ••Confirm encryption key of the selected wireless access point if the network authentication is encrypted. ••When connecting by [Manual Input], confirm SSID, network authentication type, encryption type, encryption key of the wireless access point you are using.
Wi-Fi/NFC About connections ■■When connecting with [Manual Input] On the screen of step of “If you are not sure about the WPS compatibility (connecting by [From List])”, select [Manual Input] (→251) Enter the SSID of the wireless access point you are connecting to, then select [Set] ••For details on how to enter characters, refer to “Entering Text” (→76). Select the network authentication type ••For information on network authentication, see the instruction manual of the wireless access point.
Wi-Fi/NFC About connections [Direct] Connecting directly You can select the connection method to your equipment. Select a connection method with which your equipment is compatible. ••To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the device must be compatible with Wi-Fi Direct™. ••WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices.
Wi-Fi/NFC About connections Connecting quickly with the same settings as used previously ([History Connection] / [Favorite Connection]) The camera keeps a History of times you used the Wi-Fi function. You can register items in the History to Favourite. You can easily connect with the same settings as used previously by connecting from History or Favourite.
Wi-Fi/NFC About connections ■■Registering History items to Favourite Select [History Connection] from the [Wi-Fi] menu (→61) Select the item you wish to register and press Enter a registration name ••For details on how to enter characters, refer to “Entering Text” (→76). ••Up to 30 characters can be entered. A double-byte character will be treated as two characters.
Wi-Fi/NFC About connections ■■Editing items registered in Favourite Select [Favorite Connection] from the [Wi-Fi] menu (→61) Select the Favourite item you wish to edit and press Select item Item Description [Remove from Favorite] — [Change the Order in Favorite] Select the destination. [Change the Registered Name] •• For details on how to enter characters, refer to “Entering Text” (→76). •• Up to 30 characters can be entered. A double-byte character will be treated as two characters.
Wi-Fi/NFC About connections Settings for sending pictures When sending pictures, first select [New Connection], then select the method of sending pictures. After you have completed connecting, you can also change the sending settings, such as the size of pictures to be sent. ■■[Send Images While Recording] A picture can be automatically sent to a specified device every time you take it.
Wi-Fi/NFC About connections ■■Changing the settings for sending images After you have completed connecting, you can change the sending settings, such as the size of pictures to be sent, by pressing the [DISP.] button. Item [Size] [File Format]*2 Description Resize the image to send. [Original]/[Auto]*1/[Change] •• If you select [Auto], the image size is determined by the circumstances at the destination. •• You can select the image size for [Change] from [M] or [S]. The aspect ratio does not change.
Wi-Fi/NFC [Wi-Fi Setup] menu Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi. (excluding [Network Address]) ••For details on how to select the [Setup] menu settings, refer to (→61). Select [Wi-Fi Setup] in the [Wi-Fi] menu Use cursor button to select item, and press [MENU/SET] Item Description [Wi-Fi Password] Use a password to directly connect to your smartphone. [ON]: Establishes a Wi-Fi connection using a password.
Wi-Fi/NFC [Wi-Fi Setup] menu ••For details on how to select the [Setup] menu settings, refer to (→61). Item [Wi-Fi Function Lock] To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. Description Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password.
Connecting with other devices Viewing on TV screen You can view pictures on a TV screen by connecting your camera to your TV with the HDMI micro cable or AV cable (optional). ●●Also consult TV operating manual. Preparation: ••Set [TV Aspect] to connect your camera to a TV using the AV cable (optional) (→73). ••Turn off both camera and TV. Connect camera to TV ■■To connect with an HDMI micro cable An HDMI micro cable can be used to enable viewing of still and motion pictures in high resolution.
Connecting with other devices Viewing on TV screen ■■To connect with an HDMI micro cable ●●Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI micro cable” (Type D-Type A plug, up to 2 m (6.6 feet) long) ●●Some of the playback functions cannot be performed. ●●The following menus cannot be used: [Setup], [Playback] and [Wi-Fi].
Connecting with other devices Viewing on TV screen VIERA Link (HDMI) (HDAVI Control™) What is VIERA Link (HDMI)? ●●VIERA Link is a function that automatically links this camera to VIERA Linkcompatible devices by connecting HDMI micro cables for enabling easy operation with the VIERA remote control. (Some operations are not available.) ●●VIERA Link (HDMI) is an exclusive Panasonic function added to the industrystandard HDMI control functions known as HDMI CEC (Consumer Electronics Control).
Connecting with other devices Viewing on TV screen Preparation: Set [VIERA Link] to [ON] (→74). Connect the camera to a VIERA Link (HDMI)-compatible Panasonic television (VIERA) with an HDMI micro cable (→261) Turn on the camera and press the Playback button ••By holding down the Playback button while the camera is turned off, you can turn the camera on in playback mode.
Connecting with other devices Viewing on TV screen Viewing 3D still pictures If you connect this camera to a 3D-capable TV, and play back still pictures that you recorded in 3D, you can enjoy impressive 3D still pictures on the TV. If a 3D-capable TV has an SD card slot, you can play back 3D still pictures that you recorded by inserting the card into the slot. Preparation: Set [3D Playback] to [3D] (→73).
Connecting with other devices Viewing on TV screen ■■To switch the playback method for the still pictures recorded in 3D Select the picture recorded in 3D Select [2D/3D Settings] on the [Playback Mode] menu and then press [MENU/SET] (→163) ••Playback method will switch to 3D if it is playing back in 2D (conventional image), or it will switch to 2D if it is playing back in 3D. ••If you feel tired, uncomfortable or otherwise strange when playing back pictures recorded in 3D, set to 2D.
Connecting with other devices Storing recorded still pictures and motion pictures in the recorder Follow the correct method for your device. Copying by inserting the card into the recorder You can copy pictures using Panasonic equipment (such as Blu-ray disc recorders) with support for each file format. ••See the instruction manual for the recorder for details for copying and playing back.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC Still/motion pictures can be copied from the camera to your computer by connecting the two together. ••Some computers can read directly from the camera’s memory card. For details, see the instruction manual for your computer. ••If your computer does not support SDXC Memory Cards a message will be displayed requesting you to format the card. (Do not format the card. This will erase recorded pictures.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC About supplied software The supplied CD-ROM contains the following software. Install the software on your computer before using. ■■PHOTOfunSTUDIO 9.6 PE You can capture still pictures or motion pictures to your PC, or organise captured pictures by categorising by recording date, model name of the digital camera used to record, etc. You can also correct still pictures, edit motion pictures, or write to DVD.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC ■■LoiLoScope 30 day full trial version (Windows 8.1 / 8 / 7 / Vista) LoiLoScope is a video editing software that draws out the full power of your PC. Creating videos is as easy as organising cards on top of a desk. Use your music, picture and video files to create videos to share with your friends and family by burning it to a DVD, uploading it to websites, or simply share your videos with your friends via e-mail.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC Downloading SILKYPIX Developer Studio SE This software develops and edits RAW file pictures. Edited pictures can be saved in a file format such as JPEG or TIFF that can be displayed on a PC, etc. ■■Download procedure Download SILKYPIX Developer Studio SE from the following site and install it on your computer to use. (This software is not provided on the supplied CD-ROM.) http://www.isl.co.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC Copying still pictures and motion pictures Preparation: ••When importing pictures from the built-in memory, remove any memory cards. ••Install “PHOTOfunSTUDIO” on your computer before starting the copying procedure. (→270) ••Turn on the camera and computer. Check the plug direction and insert it straight in.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC ■■Copying to your computer without using “PHOTOfunSTUDIO” (except AVCHD motion pictures) You can save pictures to use on your computer by dragging and dropping folders and files into separate folders on your computer. DCIM (Still/motion pictures) 100_PANA (Up to 999 pictures/folder) ●●Windows Drives are displayed in “Computer” folder. ●●Mac Drives are displayed on the desktop.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC ■■For PTP mode The camera can be connected to your computer even if [USB Mode] (→73) is set to [PictBridge(PTP)]. ••Only picture output can be performed. ••If you cannot connect to your PC in PTP mode, set [USB Mode] to [PC] and reconnect. ••It may not be possible to import if there are 1000 or more pictures on the card. ••Motion pictures, 3D still pictures or RAW pictures cannot be read.
Connecting with other devices Printing You can connect directly to a PictBridge-compatible printer for printing. ••Some printers can print directly from the camera’s memory card. For details, see the manual for your printer. Preparation: ••When printing pictures from the built-in memory, remove any memory cards. ••Adjust the print quality or other settings on your printer, as needed. ••Turn on the camera and printer. Check the plug direction and insert it straight in.
Connecting with other devices Printing ●●The group pictures are displayed one by one instead of all pictures at the same time. ●●Turn off the camera before inserting or removing memory cards. ●●Disconnect USB connection cable (supplied) after printing. ●●When the battery begins to run out during communication, a warning beep sounds. Cancel printing and disconnect USB connection cable (supplied). ●●Still pictures recorded in a RAW file cannot be printed.
Connecting with other devices Printing Printing multiple pictures Multiple pictures are printed at one time. Press to select [Multi Print] in step Use to select the item and press [MENU/SET] (→275) ••[Multi Select]: croll between pictures with cursor button, select pictures S to print with the [DISP.] button. (Press [DISP.] button again to release selection.) Press [MENU/SET] when selection is complete. ••[Select All]: Print all pictures.
Connecting with other devices Printing Making print settings on the camera Setting options include the number of printed pictures and their size. Make settings before selecting [Print start]. Use to select the item and press [MENU/SET] Item Settings [Print with Date] [ON] / [OFF] [Num.of prints] Set number of pictures (up to 999 pictures) [Paper Size] When [ [Page Layout] [ [ Use ] is selected, the printer settings take priority.
Others List of LCD monitor/Viewfinder displays Screens shown here are only examples. The actual display may vary.
Others List of LCD monitor/Viewfinder displays Brightness (→43, 112, 120) Exposure Compensation (→101) Manual Exposure Assistance (→110) AF Tracking (→41, 91) AF Assist Lamp (→152) Metering Mode (→148) AE Lock (→100) Defocus background condition (→37, 43, 112) Programme Shift (→46) F5.
Others List of LCD monitor/Viewfinder displays Destination settings (→139) Travel elapsed days (→139) Name (→128, 137) Age in years/months (→128, 137) Current date/time (→140) World time (→140) Focus range (→95) Zoom (→81) - 281 - SQW0206
Others List of LCD monitor/Viewfinder displays In playback Playback mode (→163) Protected picture (→186) Favourites (→184) Date/text stamped display (→154, 177) Retouched picture (→171, 172) Aspect Ratio (→141) Picture Size (→141) Quality (→142) Remaining battery (→22) 50i 30s Rec Format (→155) Rec Quality (→155) Motion picture recording time* (→57) Burst (→160) Histogram (→68) Retouch (→171) Motion picture playback (→57) Panorama playback (→123) Burst playback (→160) Continuous playback of Time Lapse
Others List of LCD monitor/Viewfinder displays Folder/File number (→53, 273) Picture number/Total pictures (→53) 25s Elapsed playback time*1 (→57) Recording date/time World time (→140) Name*2 (→128, 137) Age in years/months*2 (→128, 137) Title*2 (→176) Print settings (→185) Destination settings*2 (→139) Travel elapsed days*2 (→139) With location information (→174, 208, 211) [Time Lapse Shot] (→160) Acquiring information icon (→161) Monitor Luminance (→67) Recording mode (→30) Flash Mode (→86) White
Others Message displays The following explains the meaning of major messages displayed on the LCD monitor or viewfinder, and how to respond to them. [This memory card cannot be used] ●●Not compatible with the camera. Use a compatible card. [Some pictures cannot be deleted] [This picture cannot be deleted] ●●Non-DCF pictures (→53) cannot be deleted. → Save needed data on a computer or other device, and then use [Format] on the camera.
Others Message displays [Read Error] / [Write Error] [Please check the card] ●●Data read has failed. → Check whether card has been inserted correctly (→24). ●●Data write has failed. → Turn off the camera and remove the card. Reinsert the card and turn the camera on again. ●●Card may possibly be damaged. → Try with a different card. [Cannot record due to incompatible format(NTSC/PAL) data on this card.] ●●Format the card after saving necessary data on a PC etc.
Others Message displays [Failed to connect wireless access point] / [Connection failed] / [No destination found] ●●Check following regarding the wireless access point. → The wireless access point information set on this unit is wrong. Check the authentication type, encryption type, and encryption key. (→252) → Power of the wireless access point is not turned on. → Setting of the wireless access point is not supported by this unit. ●●Check the network setting of the destination.
Others Message displays [Unavailable. Please set Login settings on LUMIX CLUB web site.] ●●Login to the “LUMIX CLUB” from your smartphone or PC, and set the login details of the destination WEB service. [Both picture and video sharing service cannot be selected together] ●●WEB services designed only for pictures, and WEB services designed only for motion pictures cannot be selected at the same time. Deselect one of the services. [Cannot get IP address.
Others Q&A Troubleshooting Try checking these items (→288 - 298) first. If the problem persists, Performing [Reset] in the [Setup] menu may resolve the issue (→72). (Note that except for some items such as [Clock Set], all settings are returned to their values at the time of purchase.) Also, see the Panasonic support site for the latest support information. http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.) Battery, power The charging lamp is flashing.
Others Q&A Troubleshooting Recording Cannot record pictures. ●●Built-in memory/card is full. → Free space by deleting unwanted pictures (→59). Recorded pictures look white. ●●Lens is dirty (fingerprints, etc.). → Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth. ●●Lens is foggy (→8). Recorded pictures are too bright/too dark. ●●Adjust the exposure (→101). ●●[Min. Shtr Speed] is set to a fast speed, such as [1/250]. (→149) → Set [Min.
Others Q&A Troubleshooting Recording (continued) Brightness or colouring of recorded picture different from real life. ●●When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may introduce slight changes to brightness and colour. These are a result of the characteristics of the light source and do not indicate a malfunction.
Others Q&A Troubleshooting LCD monitor/Viewfinder The monitor/viewfinder is turned off although the camera is turned on. ●●When a hand or object is close to the eye sensor, the monitor display mode could be switched to viewfinder display mode without your knowledge. (→12) Pictures do not show on the LCD monitor. ●●The camera is set for viewfinder display. → Press [LVF] button and switch to LCD monitor display. Brightness is unstable. ●●Aperture value is set while shutter button is pressed halfway.
Others Q&A Troubleshooting Playback Pictures have been rotated. ●●[Rotate Disp.] is activated. (→74) Cannot view pictures. There are no recorded pictures. ●●No pictures in built-in memory or card (pictures played from card if inserted, from built-in memory if not). ●●Has the file name of the picture been changed on a computer? If so, it cannot be played back on the camera. ●●During [Filtering Play], only pictures under the set filters are displayed. → Cancel filtering (→164).
Others Q&A Troubleshooting About the Wi-Fi function It cannot connect to the wireless LAN. Radio waves get disconnected. ●●Use within the communication range of the wireless LAN network. ●●Connection types and security setting methods are different depending on the wireless access point. → Refer to the operating instructions of the wireless access point. ●●When the radio waves are interrupted, the condition may improve by moving the location or changing the angle of the wireless access point.
Others Q&A Troubleshooting About the Wi-Fi function (continued) The camera cannot be connected to Mac computer/Windows PC via Wi-Fi connection. → Please confirm login name and password are correctly typed. →W hen the system time of Mac computer or Windows PC connected to a camera differs severely from that of the camera, the camera cannot be connected to the computer or PC in some OSs.
Others Q&A Troubleshooting About the Wi-Fi function (continued) I cannot display or delete the images uploaded to the WEB service by this unit. ●●The images uploaded to the WEB service cannot be displayed or deleted by this unit. → Perform the task using a smartphone or a PC. Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to be repaired. ●●The settings stored in the camera may be deleted depending on the type of repair. → Always make a copy of important settings.
Others Q&A Troubleshooting TV, computer, printer No image appears on TV. Image blurred or not coloured. ●●Not connected correctly (→261). ●●The television has not been switched to auxiliary input. The display on the TV and on the camera do not match. ●●Aspect ratio may be incorrect or edges may be cut off with certain televisions. Cannot play motion pictures on TV. ●●Card is inserted into TV. →C onnect with AV cable (optional) or HDMI micro cable and play on camera (→261).
Others Q&A Troubleshooting TV, computer, printer (continued) Computer does not recognise card (only reads built-in memory). ●●Disconnect USB connection cable (supplied) and reconnect with card in place. ●●If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal. Computer does not recognise card. (When using an SDXC Memory Card) → Check whether your computer is compatible with SDXC Memory Cards. http://panasonic.
Others Q&A Troubleshooting Others Menu not displayed in desired language. ●●Change [Language] setting (→75). Camera rattles if shaken. ●●This sound is made by the lens movement and is not a fault. Red lamp illuminated when pressing shutter button halfway in dark locations. ●●[AF Assist Lamp] is set to [ON] (→152). AF Assist Lamp is not illuminated. ●●[AF Assist Lamp] is set to [OFF] (→152). ●●Not illuminated in bright locations. Camera is hot.
Others Usage cautions and notes When in use ●●Camera may become warm if used for long periods of time, but this is not a fault. ●●Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). •• If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
Others Usage cautions and notes When not using for a while ●●Turn off the camera before removing battery and card (ensure that battery is removed to prevent damage through over-discharge). ●●Do not leave in contact with rubber or plastic bags. ●●Store together with a drying agent (silica gel) if leaving in drawer, etc. Store batteries in cool (15 °C to 25 °C (59 °F to 77 °F)) places with low humidity (40%RH to 60%RH) and no major temperature changes.
Others Usage cautions and notes Battery ●●The battery is a rechargeable lithium ion battery. If the temperature is too high or too low, the operating time of the battery will become shorter. ●●The time required for charging varies depending on conditions of battery usage. Charging takes longer at high or low temperatures and when the battery has not been used in some time. ●●Battery will be warm during charging and for some time thereafter.
Others Usage cautions and notes 3D viewing ●●Anyone who is hypersensitive to light, suffers from heart disease or is otherwise unwell should avoid viewing 3D pictures. •• Viewing 3D pictures may have an adverse effect to the individual. ●●If you feel tired, uncomfortable or otherwise strange when viewing 3D pictures, stop viewing at once. •• Continuing to view may cause illness. •• After stopping viewing, please rest appropriately.
Others Usage cautions and notes ••SDXC Logo is a trademark of SD-3C, LLC. ••HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ••HDAVI Control™ is a trademark of Panasonic Corporation. ••“AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ••Manufactured under license from Dolby Laboratories.
Others Usage cautions and notes ••The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. ••The Wi-Fi Protected Setup™ Identifier mark is a certification mark of Wi-Fi Alliance®. ••“Wi-Fi®” and “Wi-Fi Direct®” are registered trademarks of Wi-Fi Alliance®. ••“Wi-Fi Protected Setup™”, “WPA™” and “WPA2™” are trademarks of Wi-Fi Alliance®. ••DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
Others Usage cautions and notes This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, and/or (3) open source software The software categorised as (3) is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
