Owner’s Manual for advanced features Digital Camera Model No. DMC-ZS100 DMC-ZS100 DMC-ZS60 DMC-ZS60 Please read these instructions carefully before using this product, and save this manual for future use. Message Display →375 Q&A Troubleshooting →383 Finding the information you need →2 Contents →5 Contents by Function →13 Menu list →379 Register online at http://shop.panasonic.com/support (U.S.
Finding the information you need In this “Owner’s Manual for advanced features”, you can find the information you need from the following pages. By clicking a page number, you can jump to the linked page and quickly find the information.
How to use this manual Recording mode icons Recording mode: In Recording modes that show icons in black, you can select and execute indicated menus and functions. ••Click a cross reference in the text to jump to the corresponding page. ■■About the models ••This manual provides instructions for DMC-ZS100 and DMC-ZS60. ••Screens shown in this manual are from the DMC-ZS100 unless otherwise indicated. ••Functions vary by model.
How to use this manual ■■About the symbols in the text Indicates that the menu can be set by pressing [MENU/SET] button. Indicates that the Wi-Fi setting can be made by pressing [Wi-Fi] button. Configurations that can be performed in the [Custom] menu. Tips for skillful use and points for recording. (→00) Indicates the reference page. Click to go to the corresponding page. Click to view the description on the next page.
Contents ■■Finding the information you need...... 2 ■■How to use this manual....................... 3 ■■Contents by Function........................ 13 Before Use ■■Before use.......................................... 16 ■■Standard Accessories....................... 18 ■■ ZS100 Names and Functions of Main Parts...................................... 19 ■■ ZS60 Names and Functions of Main Parts...................................... 21 Preparations ■■Attaching the Hand Strap..................
Contents Basics ■■Holding the camera............................ 44 ■■Buttons/Dials/Levers Used for Recording............................ 45 Zoom Lever (Use Zoom)............................45 Shutter button (Taking pictures)..................46 Motion picture button (Recording motion pictures).......................48 Mode dial (Select the recording mode).......49 ZS100 Control ring / Rear dial.............50 ZS60 Control ring / Control dial.........
Contents Recording mode ■■Taking pictures with automatic settings (Intelligent Auto Mode)...................... 88 Taking pictures using a handheld camera ([iHandheld Night Shot]).............................91 Combining pictures into a single still picture with rich gradation ([iHDR]).............92 Defocusing the background (Defocus control function)...........................93 Recording images by changing the brightness (exposure) or color tone............
Contents Picture Quality and coloring Settings ■■Adjusting the picture quality with effects [Photo Style]....................... 129 ■■Taking pictures using picture effects [Filter Settings]................................. 131 ■■ ZS100 Adjusting highlights and shadows [Highlight Shadow].......................... 133 ■■Adjusting the White Balance.......... 134 ■■Setting the picture quality and size............................................. 139 ■■Using the picture correction functions effectively....
Contents Recording 4K Photos ■■Recording 4K Photos...................... 184 Recording with [4K Burst].........................187 Recording with [4K Burst(S/S)].................188 Recording with [4K Pre-Burst]..................189 Selecting pictures from 4K burst file and saving................................................190 Notes on the 4K Photo function................196 Shutter and Drive Settings ■■Setting the Shutter Type.................. 199 ■■Selecting a Drive Mode....................
Contents Recording motion pictures ■■Recording motion pictures............. 251 Recording 4K motion pictures..................254 Setting the format, picture size and recording frame rate.................................255 Adjusting the focus while recording motion pictures ([Continuous AF])............257 ■■Recording pans with little vibration or recording motion pictures with zoom [4K Live Cropping]........................... 258 ■■Taking still pictures while a motion picture is being recorded......
Contents Wi-Fi ■■What you can do with the Wi-Fi® function................................. 301 ■■Wi-Fi Function.................................. 302 ■■Operating the camera by connecting it to a smartphone........ 305 Installing the smartphone/tablet app “Panasonic Image App”............................305 Connecting to a smartphone....................306 Taking pictures via a smartphone (remote recording)....................................312 Playing back pictures in the camera on a smartphone........
Contents Others ■■Optional accessories....................... 362 ■■ Using the AC adaptor (optional) and DC coupler (optional) instead of the battery.............................................362 List of monitor/ ZS100 viewfinder displays.......................... 363 ■■ ZS60 List of monitor/ viewfinder displays.......................... 369 12 ■■Message displays............................ 375 ■■Menu list........................................... 379 ■■Q&A Troubleshooting.....................
Contents by Function Recording Recording Recording mode............................................49 [Preview]......................................................106 Panorama Shot Mode..................................109 Macro recording...........................................165 [4K PHOTO]................................................184 [Post Focus].................................................210 [Time Lapse Shot]........................................216 [Stop Motion Animation].............
Contents by Function Setup/Custom Basic settings [Format].........................................................38 [Clock Set].....................................................42 Display switching.....................................53, 57 Diopter adjustment........................................60 How to set menu items..................................65 [Q.MENU]......................................................68 [Beep]............................................................78 [Economy]...
Contents by Function Wi-Fi Connect “Image App”.................................................305 [WPS (Push-Button)]...........................338, 341 Direct connection.........................................341 Image App Remote recording........................................312 Saving images.............................................313 Sending images...................................314, 322 Sending and adding location information....314 Combining motion pictures recorded with [Snap Movie]...
Before Use Before use ■■Camera handling Keep the camera away from excessive vibration, force, or pressure. ●●Avoid using the camera under the following conditions, which may damage the lens, monitor, viewfinder, or camera body. This may also cause the camera to malfunction or prevent recording.
Before Use Before use ■■Always take a test shot first Before important events when you will use the camera (at weddings, for example), always take a test shot to make sure that pictures and sound record correctly. ■■No compensation for missed shots We cannot compensate for missed shots if technical problems with the camera or card prevent recording.
Before Use Standard Accessories Check that all the accessories are supplied before using the camera. ●●The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Owner’s Manual”. ●●Battery Pack is indicated as battery pack or battery in the text. ●●SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text. ●●Please dispose of all packaging appropriately.
Before Use Names and Functions of Main Parts ZS100 1 2 3 7 8 9 10 4 5 6 11 16 12 15 14 13 1 Shutter button (→46) 12 Strap eyelet (→23) 2 Zoom lever (→45) 13 Control ring (→50) 3 Motion picture button (→48) 4 Mode dial (→49) Use this to select the recording mode. 5 Camera [ON/OFF] switch (→42) 6 Rear dial (→50) 7 Flash (→241) Allows you to zoom and adjust settings when recording.
Before Use ZS100 Names and Functions of Main Parts 20 23 21 24 25 17 18 19 12 26 27 22 28 29 30 31 32 33 34 35 12 Strap eyelet (→23) 30 Touch screen (→61) / monitor (→363) 17 [LVF] button (→58) / 31 Speaker (→44) [Fn4] button (→70) 18 Flash open lever (→241) The flash opens, and recording with the flash becomes possible. 19 [AF/AE LOCK] button (→173) 20 Charging lamp (→30) / Wi-Fi® connection lamp (→302) 21 [ ] ([Post Focus]) button (→210) / [Fn2] button (→70) 22 [Q.
Before Use Names and Functions of Main Parts ZS60 1 2 3 7 6 8 9 4 5 15 10 16 11 14 13 12 1 Shutter button (→46) 10 Strap eyelet (→23) 2 Zoom lever (→45) 11 Speaker (→44) 3 Motion picture button (→48) 4 Mode dial (→49) Use this to select the recording mode. 5 Camera [ON/OFF] button (→42) 6 Stereo microphone (→44) Be careful not to cover the microphone with your finger. Doing so may make sound difficult to record.
Before Use ZS60 Names and Functions of Main Parts 17 22 18 19 10 23 24 20 25 26 21 27 28 29 30 31 32 33 10 Strap eyelet (→23) 29 Touch screen (→61) / monitor (→369) 17 [LVF] button (→58) / [Fn4] button (→70) 30 Tripod mount (→401) 18 Charging lamp (→30) / Wi-Fi® connection lamp (→302) 19 [ ] ([Post Focus]) button (→210) / [Fn2] button (→70) 20 Control dial (→51) 21 [Q.
Preparations Attaching the Hand Strap We recommend attaching the hand strap when using the camera to prevent it from dropping. ZS100 ZS100 Strap eyelet ZS60 Strap eyelet Attaching the Shoulder Strap adaptor You can use a shoulder strap (commercially available) by attaching a shoulder strap adaptor (supplied) to the camera.
Preparations Attaching the Hand Strap 3 Pull the shoulder strap and then check that it will not come out •• Also attach the other side of the shoulder strap so it is not twisted. ■■An alternative way to attach the shoulder strap You can make the shoulder strap adaptor a little shorter.
Preparations Charging battery Always use the dedicated AC adaptor (supplied), USB connection cable (supplied), and battery for this camera. ••Always charge before first use! (battery shipped uncharged) ••Charge the battery while it is in the camera. Camera status Turn off Turn on Charge Yes No About batteries that you can use with this unit It has been found that counterfeit battery packs which look very similar to the genuine products are made available to purchase in some markets.
Preparations Charging battery ZS100 Inserting the battery To charge the battery, insert it into the camera. 1 Slide the release lever to the [OPEN] position and open the card/battery door [OPEN] [LOCK] Release lever 2 Insert the battery all the way 3 Close the card/battery door and then slide the release lever to the [LOCK] position ••Insert the battery all the way firmly and check that it is locked by lever.
Preparations Charging battery ZS60 Inserting the battery To charge the battery, insert it into the camera. 1 Slide the release lever to the [OPEN] position and open the card/battery door 2 Insert the battery all the way 3 Close the card/battery door and then slide the release lever to the [LOCK] position [OPEN] [LOCK] Release lever ••Insert the battery all the way firmly and check that it is locked by lever. Lever ■■To remove battery Make sure to insert the battery in the correct orientation.
Preparations Charging battery ZS100 Charging the battery We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F) (same for the battery temperature). Make sure that the camera is turned off. The battery can be charged from an outlet or through a PC. AC adaptor (supplied) USB connection cable (supplied) Computer Getting ready: Turn on the computer. When charging the camera, connect the USB connection cable (supplied) to the [CHARGE] socket.
Preparations Charging battery ZS60 Charging the battery We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F) (same for the battery temperature). Make sure that the camera is turned off. The battery can be charged from an outlet or through a PC. AC adaptor (supplied) USB connection cable (supplied) Computer Getting ready: Turn on the computer. When charging the camera, connect the USB connection cable (supplied) to the [CHARGE] socket.
Preparations Charging battery ●●If the computer enters sleep mode during charging, charging may be stopped. ●●If a notebook computer that is not connected to an electrical outlet is connected to the camera, the battery of the notebook computer will be depleted. Do not leave the camera and notebook connected for a long period of time. ●●Always connect the USB connection cable to the USB connector on your computer.
Preparations Charging battery ●●Do not use any other USB connection cables except the supplied one. Doing so may cause malfunction of the camera. ●●Do not use any other AC adaptors except the supplied one. ●●Do not use a USB extension cable. ●●The AC adaptor (supplied) and the USB connection cable (supplied) are dedicated accessories of this camera. Do not use them for other devices. ●●Remove the battery after use. (The battery will be exhausted if left for a long period of time after being charged.
Preparations Charging battery Remaining battery Remaining battery (only when using battery) 60p (flashes red) If the battery mark flashes red, recharge or replace a fully charged battery. Estimated number of recordable pictures and operating time ■■Recording still pictures (When using monitor) Number of recordable pictures Recording time ZS100 ZS60 Approx. 300 pictures Approx. 320 pictures Approx. 150 min. Approx. 160 min.
Preparations Charging battery ■■Recording motion pictures (When using monitor) ZS100 [Rec Format] [AVCHD] [MP4] [MP4] [Rec Quality] [FHD/17M/60i] [FHD/28M/60p] [4K/100M/30p] Approx. 105 min. Approx. 100 min. Approx. 90 min. Approx. 50 min. Approx. 50 min. Approx. 45 min. Available recording time Actual available recording time* ZS60 [Rec Format] [AVCHD] [MP4] [MP4] [Rec Quality] [FHD/17M/60i] [FHD/28M/60p] [4K/100M/30p] Approx. 110 min. Approx. 110 min. Approx. 90 min. Approx.
Preparations Charging battery ■■Viewing pictures (When using monitor) Playback time Approx. 260 min. ●●The operating times and number of recordable pictures will differ according to the environment and the operating conditions. For example, in the following cases, the operating times shorten and the number of recordable pictures is reduced. •• In low-temperature environments, such as on ski slopes. •• When operations such as the flash and zoom are used repeatedly.
Preparations ZS100 Inserting and removing the card (optional) ••Make sure that the camera is turned off. 1 Slide the release lever to the [OPEN] position and open the card/battery door 2 Insert the card all the way 3 Close the card/battery door and slide the release lever to the [LOCK] position ••Check the orientation of a card (terminals face monitor). ••Insert the card all the way firmly until it clicks. [OPEN] [LOCK] Release lever ■■To remove card: Press the center of the card.
Preparations ZS60 Inserting and removing the card (optional) ••Make sure that the camera is turned off. 1 Slide the release lever to the [OPEN] position and open the card/battery door 2 Insert the card all the way 3 ••Check the orientation of a card (terminals face monitor). ••Insert the card all the way firmly until it clicks. [OPEN] [LOCK] Release lever Close the card/battery door and slide the release lever to the [LOCK] position ■■To remove card: Press the center of the card.
Preparations About the Card The following SD standard-based cards (Panasonic brand recommended) can be used. Operation has been confirmed when using a Panasonic brand card. Type of Card Capacity SD Memory Cards SDHC Memory Cards SDXC Memory Cards Notes 512 MB – 2 GB •• Can be used with devices compatible with the respective formats. 4 GB – 32 GB •• Before using SDXC Memory Cards, check that your 48 GB – 128 GB computer and other devices support this type of card. http://panasonic.
Preparations About the Card ●●If you set the write-protect switch to “LOCK”, you may not be able to write, delete or format the data or display it by recording date. ●●It is recommended that you copy important pictures to your computer (as electromagnetic waves, static electricity, or faults may cause data to be damaged). Formatting the card (initialization) Format the card before recording a picture with this unit.
Preparations About the Card Estimated recording capacity (number of pictures/recording time) The number of pictures you can take and the recording time vary in proportion to card capacity (and depending on recording conditions and type of card).
Preparations About the Card Recording time capacity (motion pictures) ••The recordable time is the total time of all the motion pictures which have been recorded. ([h], [m] and [s] indicate “hour”, “minute” and “second”.
Preparations About the Card ●●If the surrounding temperature is high, or a motion picture is recorded continuously, [ ] is displayed and recording may be stopped halfway through to protect the camera. ●●Motion pictures with [Rec Quality] setting of [FHD/28M/60p]/[FHD/17M/60i] in [AVCHD]: Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds.
Preparations Setting the clock The clock is not set when the camera is shipped. 1 ZS100 Set the Camera [ON/OFF] switch to [ON] ZS60 Press the Camera [ON/OFF] button ••If the language select screen is not displayed, proceed to step 4. 2 3 Press [MENU/SET] while the message is displayed 4 5 Press [MENU/SET] Press to select the language, and press [MENU/SET] ••The [Please set the clock] message appears.
Preparations Setting the clock 6 7 8 9 Press [MENU/SET] When [The clock setting has been completed.] is displayed, press [MENU/SET] When [Please set the home area] is displayed, press [MENU/SET] Press to set your home area and press [MENU/SET] City or area name Current time Difference from GMT (Greenwich Mean Time) ●●If the clock is not set, the correct date cannot be printed when you order a photo studio to print the picture, or when you stamp the date on the pictures with [Text Stamp].
Basics Holding the camera Hold the camera gently with both hands keeping your arms close to your body while standing with your feet slightly apart. ••To prevent dropping, be sure to attach the supplied strap and fit it to your wrist. ••Do not block the flash, AF Assist Lamp, microphone, or speaker with your fingers or other objects. ••Make sure that the camera does not move at the moment the shutter button is pressed.
Basics Buttons/Dials/Levers Used for Recording Zoom Lever (Use Zoom) You can adjust the area of a picture to be taken using the zoom or control ring. ••You can also use the zoom function from the touch panel. (→240) ••For details about zoom types and use, refer to (→236). 1 Zoom lever Move the zoom lever ZS100 ZS60 1 Control ring Turn the control ring* ZS100 ZS60 * You can perform zoom operation by assigning the [Zoom] setting to the control ring.
Basics Buttons/Dials/Levers Used for Recording Shutter button (Taking pictures) ••Press the [ ] button ( ) to set the drive mode to [ Press the shutter button halfway (press lightly) to 1 focus on the subject ] ([Single]). •• The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing, you do not have the appropriate exposure, unless you are using the flash.
Basics Buttons/Dials/Levers Used for Recording Example: Range of focus during the Program AE Mode ZS100 70 cm (2.3 feet) 50 cm (1.6 feet) ZS60 2 m (6.6 feet) 50 cm (1.6 feet) Displaying still pictures immediately after taking them → [Custom] → [Auto Review] Set the time to display the pictures you have taken after taking still pictures. Settings: [HOLD] / [5SEC] / [4SEC] / [3SEC] / [2SEC] / [1SEC] / [OFF] ●●When [HOLD] is selected, pictures are displayed until you press the shutter button halfway.
Basics Buttons/Dials/Levers Used for Recording Motion picture button (Recording motion pictures) 1 Press the motion picture button to start recording •• Immediately release the motion picture button after pressing it.
Basics Buttons/Dials/Levers Used for Recording Mode dial (Select the recording mode) 1 Set to the desired recording mode •• Rotate the mode dial slowly to select the desired mode. ZS100 ZS60 Intelligent Auto Mode (→88) Take pictures with automatic settings. Intelligent Auto Plus Mode (→95) Allows you to adjust the brightness (exposure) and color hue as desired. Program AE Mode (→97) Take pictures with automatic shutter speed and aperture value settings.
Basics Buttons/Dials/Levers Used for Recording ZS100 Control ring / Rear dial The “Control Ring/Rear dial” is an easy and convenient way to adjust several settings, depending on the camera mode selected. You can use the control ring ( )/rear dial ( ) to change the settings of the unit. Items that can be set by the control ring/rear dial vary depending on recording modes. Following are the pre-assigned settings.
Basics Buttons/Dials/Levers Used for Recording ZS60 Control ring / Control dial The “Control Ring/Control dial” is an easy and convenient way to adjust several settings, depending on the camera mode selected. You can use the control ring ( )/control dial ( ) to change the settings of the unit. Items that can be set by the control ring/control dial vary depending on recording modes. Following are the pre-assigned settings.
Basics Buttons/Dials/Levers Used for Recording Enabling/disabling the operation guide display → [Custom] → [Dial Guide] → [ON] / [OFF] ••When you set [Dial Guide] to [ON], operation guide appears on the recording screen. Example Cursor button / [MENU/SET] button (Selecting/setting items) Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed.
Basics Buttons/Dials/Levers Used for Recording [DISP.] button (Switching the display information) 1 Press [DISP.] button to switch the display •• If the information on the screen is not displayed any longer because no operation was performed for some time, press the [DISP.] button or touch the screen to display the information again. ZS100 ZS60 During recording You can use [Monitor Disp. Style] and [LVF Disp.
Basics Buttons/Dials/Levers Used for Recording ■■[ ] Live View Finder style display layout (Example of viewfinder style display) With information (Detailed information) With information With information (Detailed information) + level gauge 60p With information + level gauge 60p Switching the monitor display method [ [ → [Custom] → [Monitor Disp. Style] ]: Live View Finder style display layout ]: Monitor style display layout Switching the viewfinder display method [ [ 54 → [Custom] → [LVF Disp.
Basics Buttons/Dials/Levers Used for Recording Enabling/disabling the histogram display → [Custom] → [Histogram] → [ON] / [OFF] When set to [ON], you can move the display position of the histogram by pressing ••Direct touch operation is also possible from the recording screen. (Example) Displays distribution of brightness in picture – e.g. if the graph peaks at the right, this means there are several bright areas in the picture. A peak in the center represents correct brightness (correct exposure).
Basics Buttons/Dials/Levers Used for Recording Using the level gauge If you want to make sure that the camera is not slanted or tilted, for example, when you take a picture of a landscape, use the level gauge indication as a reference. 1 Press [DISP.] button to display the level gauge The yellow line indicates the current angle. Correct the angle of the camera so that it matches the white line. Tilting up or down Tilting left or right •• In this case, it is facing upward.
Basics Buttons/Dials/Levers Used for Recording During playback With information Detailed information display*1 Histogram display*1 Without information ([Highlight])*1, *2, *3 R G B AM10:00 DEC. 1.2016 100-0001 Y 1/98 100-0001 Without information*3 *1 This screen is not displayed during Playback Zoom, Motion Picture Playback, Automatic Scrolling Playback of panorama pictures, continuous playback or Slide Show.
Basics Buttons/Dials/Levers Used for Recording [LVF] button (Recording pictures using the viewfinder) Switching between the monitor and viewfinder You can operate the [LVF] button/[Fn4] button in two ways, using it either as the [LVF] button or as a function button [Fn4]. You can use this button as the [LVF] button at the time of purchase. ••For details on the function button, refer to (→70).
Basics Buttons/Dials/Levers Used for Recording 1 Press [LVF] button Automatic switching between viewfinder and monitor (eye sensor) Viewfinder display Mode Monitor display Display Automatic switching between viewfinder and monitor (eye sensor) The eye sensor automatically switches the display to viewfinder when your eye or an object moves close to the viewfinder. When the eye or object moves away from the viewfinder, the camera returns to monitor display.
Basics Buttons/Dials/Levers Used for Recording ■■About diopter adjustment Rotate the diopter adjustment dial to adjust until you are able to clearly see the characters displayed in the viewfinder. ZS100 ZS60 Setting the sensitivity of the eye sensor or setting to switch the display between the viewfinder and monitor → [Custom] → [Eye Sensor] [Sensitivity] Use this setting to set the sensitivity of the eye sensor.
Basics Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. Touch To touch and release the touch screen. Be sure to touch the center of the desired icon. Drag To touch and slide your finger across the touch screen. This can also be used to forward or rewind a picture during playback, etc. Pinch (spread/pinch) On the touch screen, spread (pinch out) your 2 fingers to zoom in, and pinch (pinch in) your 2 fingers to zoom out.
Basics Touch screen (Touch operations) ●●Touch the screen with the clean and dry finger. ●●If you use a commercially available monitor protection sheet, please follow the instructions that accompany the sheet. (Some monitor protection sheets may impair visibility or operability.) ●●Do not press on the monitor with hard pointed tips, such as ballpoint pens. ●●Do not press the touch screen with your fingernails.
Basics Touch screen (Touch operations) Touching the screen and recording (Touch Shutter function) Recording mode: This function enables you to focus and record still pictures simply by touching the subjects that appear on the screen. 1 Touch [ ] 2 Touch [ 3 Touch the subject you want to record ] •• The icon changes to [ shutter recording. ] and you can now proceed with touch •• To release the touch shutter function → Touch [ ].
Basics Touch screen (Touch operations) Easily Optimizing the Brightness for a Specified Area ([Touch AE]) Recording mode: You can easily optimize the brightness for a touched position. When the face of the subject appears dark, you can brighten the screen according to the brightness of the face. 1 Touch [ ] 2 Touch [ 3 Touch the subject you want to optimize the brightness for ] •• The setting screen for the brightness optimization position is displayed.
Basics Setting the menu You can use the menu to set camera and recording functions, operate playback functions, and perform other operations. In this Owner’s Manual, steps for setting a menu item are described as follows: Example: To change the [Quality] setting from [ ] to [ ] in the [Rec] menu → [Rec] → [Quality] → [ ] How to set the menu Menu settings can be made either by button or touch operation.
Basics Setting the menu ■■Switching menu type Press Press •• •• ZS100 to select a tab such as [ ] Items can also be selected by rotating the rear dial. ZS60 Items can also be selected by rotating the control dial. Press [MENU/SET] Menu type With touch screen operations Touch a tab, such as [ ] 2 Press to select the menu item and press [MENU/SET] •• ZS100 The menu item can also be selected by rotating the rear dial. •• ZS60 The menu item can also be selected by rotating the control dial.
Basics Setting the menu 4 Press [Q.MENU/ ] button repeatedly until the recording or playback screen reappears •• During recording, the menu screen can also be exited by pressing the shutter button halfway. With touch screen operations Touch [ ] ●●When [Menu Resume] (→84) in the [Setup] menu is set to [ON], the screen displayed last after you selected the menu item will reappear. It is set to [ON] at the time of purchase.
Basics Calling frequently-used menus instantly (Quick Menu) You can easily call some of the menu items and set them during recording. ••Some items or settings can not be selected depending on the mode or display style the camera is in. 1 Press [Q.MENU/ ] button ZS100 ZS60 2 ZS100 Rotate the rear dial to select a menu item, and press or 60p ZS60 Rotate the control dial to select a menu item, and press or ••The menu item can also be selected by pressing 3 .
Basics Calling frequently-used menus instantly (Quick Menu) ZS100 Switching the method for setting Quick Menu items → [Custom] → [Q.MENU] [PRESET]: The default items can be set. [CUSTOM]: The Quick Menu will consist of desired items (below). ZS100 Change the Quick Menu to your preferred item When [Q.MENU] in the [Custom] menu is set to [CUSTOM] (above), the Quick Menu can be changed as desired. Up to 15 items can be set to the Quick Menu. 1 After pressing the [Q.
Basics Assigning frequently used functions to the buttons (Function buttons) You can assign frequently-used functions to particular buttons ([Fn1] - [Fn4]) or icons displayed on the screen ([Fn5] - [Fn9]). ••Certain functions cannot be assigned to some function buttons. ••The function assigned to the function button may not work in some modes or on some display screens.
Basics Assigning frequently used functions to the buttons (Function buttons) Using the function buttons during recording Press the function button to use the assigned function. ■■Using function buttons with touch operations Touch [ ] Touch [Fn5], [Fn6], [Fn7], [Fn8] or [Fn9] ■■Functions that can be assigned in [Setting in REC mode] [Rec] menu/Recording functions •• [4K PHOTO] (→184): [Fn1]* •• [Wi-Fi] (→302): [Fn5]* •• [Q.
Basics Assigning frequently used functions to the buttons (Function buttons) [Motion Picture] menu •• [Motion Pic. Set] (→255) •• [4K Live Cropping] (→258) •• [Snap Movie] (→262): [Fn8]* [Custom] menu •• [Silent Mode] (→225) •• [Peaking] (→172) •• [Histogram] (→55): [Fn7]* •• [Guide Line] (→55) •• [Zebra Pattern] (→230) •• [Monochrome Live View] (→231) •• [Rec Area] (→252) •• [Zoom lever] (→239) •• [Touch Screen] (→61) * Function button settings at the time of purchase.
Basics Assigning frequently used functions to the buttons (Function buttons) Using the function buttons during playback You can directly set an assigned function to a selected image by pressing the function button during playback. Example: When [Fn2] is set to [Favorite] 1 2 Press to select the picture Press [Fn2] button, and then set the picture as [Favorite] ■■Functions that can be assigned in [Setting in PLAY mode] ••The following functions can be assigned to the button [Fn1], [Fn2], or [Fn4].
Basics Changing the settings assigned to the control ring/rear dial ZS100 Recording mode: Changes the settings assigned to the control ring/rear dial. 1 Set the menu 2 3 Use to select [ ] (control ring) or [ ] (rear dial) and press [MENU/SET] Use to select the setting and press [MENU/SET] → [Custom] → [Ring/Dial Set] [DEFLT] [Normal] [Photo Style] (→129) [Zoom]* (→236) [Filter Effect] (→131) [Step Zoom]* (→239) [Aspect Ratio] (→139) [Exposure Comp.
Basics Changing the settings assigned to the control ring/control dial ZS60 Recording mode: Changes the settings assigned to the control ring/control dial. 1 Set the menu 2 3 Use to select [ ] (control ring) or [ ] (control dial) and press [MENU/SET] Use to select the setting and press [MENU/SET] → [Custom] → [Ring/Dial Set] [DEFLT] [Normal] [Drive Mode] (→201) [Zoom]* (→236) [Photo Style] (→129) [Step Zoom]* (→239) [Filter Effect] (→131) [Exposure Comp.
Basics Using the [Setup] menu [Clock Set] and [Economy] are important for clock setting and battery life. Please check these before use. For details on how to select the [Setup] menu settings, refer to (→65). [Online Manual] Settings: [URL display] / [QR Code display] [Clock Set] Set time, date, and display format. (→42) [World Time] Set the recording date and time with the local time at your destination. ••You can set [Destination] after setting [Home].
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Travel Date] If you set your travel schedule and record pictures, the day of your trip on which the picture was taken will be recorded.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Beep] Sets the beep sounds or shutter sounds. ■■[Beep Volume] Settings: (High) / (Low) / (Off) Settings: (High) / (Low) / (Off) Settings: / ■■[Shutter Vol.] ■■[Shutter Tone] / ●●When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] are set to “Off”. [Live View Mode] Sets the display speed and picture quality of the screen (Live View screen) when recording pictures.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Monitor Display] / [Viewfinder] Adjust brightness and color of the monitor or viewfinder. Settings Adjusts the brightness. [Brightness] Adjusts the contrast. [Contrast] Adjusts the vividness of colors. [Saturation] Adjusts red hues. [Red Tint] Adjusts blue hues.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Monitor Luminance] Sets the monitor brightness according to the ambient light level. Settings The brightness is adjusted automatically depending on how bright it is around the camera. The brightness is increased. The brightness is standard. The brightness is decreased. ●●Some subjects may look different from their actual appearance, but the recorded picture will not be affected.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Economy] Turn off the camera or make the monitor go dark while not using the camera or if no operation is performed for a preset period of time to minimize battery consumption. ■■ [Sleep Mode] ZS100 The camera is automatically turned off if the camera has not been used for the time selected on the setting. Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [USB Mode] Select communication method for when connecting camera to a computer or printer with USB connection cable (supplied). Settings [Select on connection] Select communication method each time you connect to a computer or PictBridge-compatible printer. Select when connecting to a PictBridge-compatible printer. [PictBridge(PTP)] Select when connecting to a computer.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [TV Connection] (continued) ■■ [HDMI Info Display (Rec)] ZS100 Set whether or not to display information when recording a picture on the camera while monitoring it on a TV, etc., connected to the camera via an HDMI micro cable. Settings [ON] The camera display is output as is. [OFF] Only images are output.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [m/ft] Select how distance is displayed, in Ft or M. Settings: [ ]/[ ] [Menu Resume] Save the last operated menu position. Settings: [ON] / [OFF] [Menu Background] Set the background color for the menu screen. [Menu Information] Explanations of the menu items and settings are displayed on the menu screen. Settings: [ON] / [OFF] [Language] Change display language.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Version Disp.] Check the firmware version of the camera. ●●When you press [MENU/SET] while the version is displayed, software information for this unit, such as the license, is displayed. [Exposure Comp. Reset] If the recording mode is changed or the camera is turned off, the exposure compensation (brightness) setting is reset.
Basics Using the [Setup] menu For details on how to select the [Setup] menu settings, refer to (→65). [Reset] The following settings are reset to the default: –– Recording settings (except for [Face Recog.] and [Profile Setup] settings) and drive mode –– Recording settings ([Face Recog.
Basics Entering Text Use the cursor button to enter names with the Face Recognition function and in [Profile Setup] (babies and pets), or to register locations in [Travel Date] etc. ••Example of operation for displaying a screen: → [Rec] → [Profile Setup] → [SET] → [Baby1] → [Name] → [SET] 1 2 Use to select characters Press [MENU/SET] several times until the desired character is displayed ••[ ]: Enter a blank. ■■To change the character type ••Press [DISP.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Recording mode: This mode is recommended for those who want to point and shoot as the camera optimizes settings to match the subject and recording environment.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Auto Focus, Face/Eye Detection, and Face Recognition [AF Mode] is automatically set to [ ]. If you touch the subject, the camera switches to [ ] and the AF tracking function starts operating. You can also switch to [ ] by pressing [MENU/SET], going to the [Rec] menu, then going to the [AF Mode] menu and selecting [ ] (tracking).
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Flash ZS100 When the flash is open, the camera automatically sets [ ], [ ] (Auto/Red-Eye Reduction), [ ], or [ ] based on the type of subject and brightness. ZS60 When is pressed and [ ] (i auto) selected, the camera will automatically be set to [ ], [ ] (Auto/Red-Eye Reduction), [ ], or [ ], depending on the type of subject and brightness.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) About Backlight Compensation Backlight compensation is automatically activated in Intelligent Auto Plus Mode or Intelligent Auto Mode. Backlight is a condition where a light shines from behind a subject. When there is a backlight, the subject appears darker and the camera will automatically attempt to correct it by increasing the brightness of the picture.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Combining pictures into a single still picture with rich gradation ([iHDR]) Recording mode: When there is, for example, strong contrast between the background and the subject, [iHDR] records multiple still pictures with differing exposures and combines them to create a single still picture rich in gradation. [iHDR] is activated when required. When activated, [ ] will be displayed on the screen.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Defocusing the background (Defocus control function) Recording mode: You can easily set the blurriness of the background while checking the screen. 1 Press to display the setting screen 2 •• When in Intelligent Auto Plus mode, each press of switches between brightness (exposure) setting operation (→94), blur control operation, and operation finish.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Recording images by changing the brightness (exposure) or color tone Recording mode: Setting brightness (exposure) 1 2 Press button •• Each press of switches between brightness (exposure) setting operation, blur control operation (→93), and operation finish.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) ●●When [Exposure Comp. Reset] is set to [ON], the set brightness returns to standard (midpoint) if the camera is turned off or the camera is changed to another recording mode. (→85) ●●The color setting will return to the default level (center point) when this unit is turned off or the camera is switched to another Recording mode.
Recording mode Taking pictures with automatic settings (Intelligent Auto Mode) Available menus You can set only the following menus. Intelligent Auto Plus Mode Menu Item [Rec] [Photo Style], [Aspect Ratio], [Picture Size], [Quality], [AF Mode], [AFS/AFF/AFC], [Burst Rate], [4K PHOTO], [Auto Bracket], [Self Timer], [Post Focus], [iHandheld Night Shot], [iHDR], [Time Lapse Shot], [Stop Motion Animation], [Shutter Type], [Color Space]*, [Stabilizer], [Face Recog.
Recording mode Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode) Recording mode: Take pictures using automatic aperture values and shutter speed settings in accordance with the brightness of a subject. 1 2 3 Set mode dial to [ ] Press the shutter button halfway 60p ••If the aperture value and shutter speed flash red, you do not have the correct exposure.
Recording mode Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode) •• •• ZS100 The camera automatically removes noise when [Long Shtr NR] is set to [ON] and the shutter speed is slow. Therefore, [Long shutter noise reduction ongoing] may be displayed. (→144) Although noise reduction requires the same time as the shutter speed for signal processing, you can take sharp pictures. ZS60 The camera automatically removes noise when the shutter speed is slow.
Recording mode Taking pictures after automatically setting the aperture value and shutter speed (Program AE Mode) About Program Shift The function for maintaining the same exposure (brightness) while changing the shutter speed and aperture value combination is called “Program Shift”. You can use “Program Shift” to take pictures by adjusting the shutter speed and aperture value even in Program AE Mode. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 (EV) (Aperture value) 2.
Recording mode Taking pictures by setting the aperture value and shutter speed Recording mode: ••The effect of the aperture value and shutter speed you have set is not applied to the recording screen. To check the effect on the recording screen, use Preview Mode. (→106) ••The brightness of the screen may vary from the actual pictures recorded. Check the brightness of pictures using the playback screen.
Recording mode Taking pictures by setting the aperture value and shutter speed Taking pictures by setting the aperture value (Aperture-Priority AE Mode) When the aperture value is increased, the range of depth in focus expands, and the picture shows up clearly from the position of the camera to the background. When the aperture value is reduced, the range of depth in focus shrinks, and the background can get blurry.
Recording mode Taking pictures by setting the aperture value and shutter speed Taking pictures by setting the shutter speed (Shutter-Priority AE Mode) When you increase the shutter speed, you can reduce jitter when recording a subject. When you decrease the shutter speed, the subject’s movement is shown. 1 2 Set mode dial to [ ] ZS100 Rotate the rear dial to set the shutter speed •• The operation can also be performed by rotating the control ring.
Recording mode Taking pictures by setting the aperture value and shutter speed Taking pictures by setting the aperture value and shutter speed (Manual Exposure Mode) Determine the exposure by manually setting the aperture value and the shutter speed. 1 Set mode dial to [ ] 2 Exposure meter ZS100 Rotate the rear dial to set the shutter speed and the aperture value •• You can switch between the shutter speed setting operation and the aperture value setting operation each time is pressed.
Recording mode Taking pictures by setting the aperture value and shutter speed ●● ZS100 ●● ZS60 When you rotate the control ring or rear dial, an exposure meter is displayed. When you rotate the control ring or control dial, an exposure meter is displayed. ●●If the correct exposure is not achieved when you press the shutter button halfway, the numeric values of the aperture and shutter speed are displayed in flashing red.
Recording mode Taking pictures by setting the aperture value and shutter speed ZS100 About [T] (Time) If you set the shutter speed to [T], the shutter stays open when the shutter button is pressed fully. (Approximately up to 120 seconds) The shutter closes if you press the shutter button again. Use this function when you want to keep the shutter open for an extended period, for example, to record pictures of fireworks or night scenes.
Recording mode Taking pictures by setting the aperture value and shutter speed Checking the effects of the aperture value and shutter speed (Preview Mode) Recording mode: You can use Preview Mode to check the effects of the selected aperture value and shutter speed. ••Checking the effect of the selected aperture value: This enables you to check the depth of field (focus range) by physically narrowing the lens aperture blades to the aperture value used for the actual recording.
Recording mode Taking pictures by setting the aperture value and shutter speed Depth of field characteristic Recording conditions Aperture value Small Large Focal length Telephoto Wide-angle Distance to a subject Depth of field (Focus range) Close Shallow (narrow) Example: To take a picture by deliberately blurring the background Far Deep (wide) Example: To take a picture by adjusting the focus while including the background ●●You can take a picture even when Preview Mode is activated.
Recording mode Taking pictures by setting the aperture value and shutter speed Easily set aperture / shutter speed for suitable exposure (One Push AE) Recording mode: When the exposure setting is too bright or too dark, you can use one push AE to achieve a suitable exposure setting. How to tell if the exposure is not adequate ••If the aperture values and shutter speed blink red when the shutter button is pressed halfway.
Recording mode Recording panorama pictures (Panorama Shot Mode) Recording mode: Consecutive photos taken while the camera is moved are combined to form a panorama.
Recording mode Recording panorama pictures (Panorama Shot Mode) ■■Changing the recording direction and angle of view (image size) of panorama pictures → [Rec] → [Panorama Settings] [Direction] Sets the recording direction. ]/[ ]/[ ]/[ ] [ [Picture Size] Sets the angle of view (image size). [STANDARD]: Gives priority to the image quality. [WIDE]: Gives priority to the angle of view. •• When the same angle of view is recorded, [STANDARD] results in a larger number of recording pixels.
Recording mode Recording panorama pictures (Panorama Shot Mode) ■■About panorama picture playback Pressing will start scrolling playback automatically in the same direction as the recording. ••The following operations can be performed during scrolling playback. Start panorama playback / Pause* Stop * When the playback is paused, you can scroll forwards and backwards by dragging the screen. When the scroll bar is touched, the playback position jumps to the touched position.
Recording mode Taking pictures according to the scene (Scene Guide Mode) Recording mode: If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, color, and focus, allowing you to record in a manner appropriate to the scene. 1 2 Set mode dial to [ 3 Press [MENU/SET] Press ] to select the scene ••The scene can also be selected by dragging an example image or the slide bar.
Recording mode Taking pictures according to the scene (Scene Guide Mode) ●●In the following scene, the recording screen is displayed like a frame dropping with a slight delay compared to normal recording. [Glistening Water], [Glittering Illuminations], [Soft Image of a Flower] ●●To change the Scene Guide Mode, select the [ ] tab on the menu screen, select [Scene Switch], and then press [MENU/SET]. You can return to step 2 on (→112).
Recording mode Taking pictures according to the scene (Scene Guide Mode) For the setting procedures for the Scene Guide Mode, refer to (→112) 5: [Relaxing Tone] 6: [Sweet Child’s Face] ●●When you touch the face, a still picture is recorded with the focus and exposure set for the touched location. ●●The more the zoom is drawn towards T side and the closer the camera is brought to the subject, the greater the effect will be.
Recording mode Taking pictures according to the scene (Scene Guide Mode) For the setting procedures for the Scene Guide Mode, refer to (→112) 14: [Warm Glowing Nightscape] ●●Tripod, self-timer recommended. ●●The shutter may remain closed after taking the picture. This is due to signal processing and is not a malfunction. ●●Noise may become visible when you take pictures in dark places. 15: [Artistic Nightscape] ●●Tripod, self-timer recommended. ●●The shutter may remain closed after taking the picture.
Recording mode Taking pictures according to the scene (Scene Guide Mode) For the setting procedures for the Scene Guide Mode, refer to (→112) 20: [Appetizing Food] ●●The more the zoom is drawn towards T side and the closer the camera is brought to the subject, the greater the effect will be. ●●Tripod, self-timer recommended. ●●For close-up recording, we recommend that you avoid using the flash.
Recording mode Taking Pictures with different picture effects (Creative Control Mode) Recording mode: This mode records with additional picture effects. You can set the effects to be applied to a picture by selecting a sample picture and checking them simultaneously on the screen. 1 2 Set mode dial to [ Press (filters) Preview display ] to select the picture effect ••You can also select the picture effects (filters) by touching the example images.
Recording mode Taking Pictures with different picture effects (Creative Control Mode) ●●In the following picture effect, the recording screen is displayed like a frame dropping with a slight delay compared to normal recording. [Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter], [Sunshine] ●●[White Balance] will be fixed to [AWB] and ISO sensitivity to [AUTO]. ●●The following menu items can be set in the [ ] menu.
Recording mode Taking Pictures with different picture effects (Creative Control Mode) Picture effect Items that can be set [Sepia] Low contrast [Monochrome] Yellowish coloring [Dynamic Monochrome] Low contrast [Rough Monochrome] Black & white [High Dynamic] Black & white [Cross Process] •• [Miniature Effect] Bluish coloring High contrast Vividness Vividness Gaudy coloring Gaudy coloring Coloring Greenish coloring / Bluish coloring / Yellowish coloring / Reddish coloring •• [Bleach Bypass
Recording mode Taking Pictures with different picture effects (Creative Control Mode) Picture effect Items that can be set [Star Filter] Length of the rays of light Rays of light is short Rays of light is long Number of the rays of light Smaller Larger Angle of the rays of light Rotate to the left Rotate to the right [One Point Color] Amount of color retained Leaves a large amount of Leaves a small amount of color color •• For details about [One Point Color] (→123) [Sunshine] Coloring Yellowish colo
Recording mode Taking Pictures with different picture effects (Creative Control Mode) Taking a picture with a blurred background (Defocus control function) You can easily set the blurriness of the background while checking the screen. 1 Press to display the setting screen •• Each press of switches between brightness (exposure) setting operation (below), blur control operation, and operation finish.
Recording mode Taking Pictures with different picture effects (Creative Control Mode) [Miniature Effect] ■■Defocusing a picture You can create the impression of a diorama by intentionally creating a blurred area and focusing area using [Miniature Effect]. You can set the recording direction (direction of blurred area), position and size of the focusing area.
Recording mode Taking Pictures with different picture effects (Creative Control Mode) [One Point Color] ■■Select the color to be retained After touching [ ], touch [ ] Select the color to be retained with [MENU/SET] and press •• You can also select it by touch operations. •• When you press [DISP.] button, the initial setting condition is restored. ●●The selected color may not be retained for some subjects.
Recording mode Recording motion pictures by setting the aperture value/shutter speed (Creative Video Mode) Recording mode: You can record motion pictures by manually setting the aperture value and shutter speed. 1 2 3 Set mode dial to [ ] Set the menu → Press [Motion Picture] → [Exposure Mode] to select [P], [A], [S] or [M], and press [MENU/SET] ••The operation for changing the aperture value or shutter speed is the same as the operation for setting the mode dial to [ ], [ ], [ ] or [ ].
Recording mode Recording motion pictures by setting the aperture value/shutter speed (Creative Video Mode) Recording Slow Motion Pictures ([High Speed Video]) Slow motion pictures can be recorded by performing recording at a super high speed. When these recordings are played back, the motion is displayed slowly. ••To record pictures, use a UHS Speed Class 3 card.
Recording mode Recording motion pictures by setting the aperture value/shutter speed (Creative Video Mode) Minimizing operational sounds during motion picture recording The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. Using touch icons allows silent operation while recording motion pictures.
Recording mode Registering your own settings and recording (Custom Mode) Recording mode: You can register the current camera settings as custom settings. If you then record in Custom Mode, you can use the registered settings. ••Initial setting of the Program AE Mode is registered as the custom settings initially. Registering your own settings ([Cust.Set Mem.]) To allow recording using the same settings, up to 3 sets of current camera settings can be registered using [Cust.Set Mem.].
Recording mode Registering your own settings and recording (Custom Mode) Recording using registered custom set 1 Set mode dial to [ ] •• The custom set you used last time will be called up. ■■To change a custom set Set mode dial to [ ] Press [MENU/SET] to bring up the menu Press to select the custom set you want to use, and press [MENU/SET] It is also possible to display the selection screen by touching the Recording mode icon in recording screen.
Picture Quality and coloring Settings Adjusting the picture quality with effects [Photo Style] Recording mode: You can adjust the colors and picture quality according to the concept of the picture that you want to create. → [Rec] → [Photo Style] [Standard] Standard setting. [Vivid]* Setting with slightly high contrast and saturation. [Natural]* Setting with slightly low contrast. [Monochrome] Setting that creates a picture using monochrome shades of gray only, such as black and white.
Picture Quality and coloring Settings Adjusting the picture quality with effects [Photo Style] ■■Adjusting the picture quality ••Picture quality cannot be adjusted in the Intelligent Auto Plus Mode. Press to select the type of Photo Style Press to select an item and press [Contrast] [Sharpness] [Noise Reduction] [Saturation]*1 [Color Tone]*1 [Filter Effect]*2 Standard to adjust [+] [–] [+] [–] Increases the contrast in a picture. Decreases the contrast in a picture.
Picture Quality and coloring Settings Taking pictures using picture effects [Filter Settings] Recording mode: You can apply picture effects (filters) that are available for Creative Control Mode to images in other modes, such as Aperture-Priority AE Mode or Panorama Shot Mode. For details (→117). → [Rec] → [Filter Settings] → [Filter Effect] [ON] Record with the set picture effect added. [OFF] Record without adding picture effect. [SET] Set picture effect.
Picture Quality and coloring Settings Taking pictures using picture effects [Filter Settings] Taking two still pictures with and without picture effects ([Simultaneous record w/o filter]) You can take two still pictures at the same time by pressing the shutter button once; one with effects and one without effects.
Picture Quality and coloring Settings Adjusting highlights and shadows ZS100 [Highlight Shadow] Recording mode: You can adjust the highlights and shadows in a picture while confirming the brightness of these areas on the screen. 1 Set the menu 2 Press → [Rec] → [Highlight Shadow] to select the item ([Standard]) No adjustments. ([Higher contrast]) Makes the highlighted areas brighter and shadowed areas darker. ([Lower contrast]) Makes the highlighted areas darker and shadowed areas brighter.
Picture Quality and coloring Settings Adjusting the White Balance Recording mode: In sunlight, under incandescent lights or in other such conditions where the color of white takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to what is seen by the eye in accordance with the light source.
Picture Quality and coloring Settings Adjusting the White Balance Under fluorescent lighting, LED lighting fixtures, etc., the optimal White Balance will vary depending on the lighting type, so use [AWB], [ ], [ ], [ ]* or [ ]*. * ZS100 ●●The White Balance may not operate correctly if you take pictures using a flash or the subject is recorded outside of the effective flash range (→242).
Picture Quality and coloring Settings Adjusting the White Balance Setting the White Balance manually Take a picture of a white object under the target light source to adjust colors.
Picture Quality and coloring Settings Adjusting the White Balance Performing White Balance fine adjustments White Balance settings can be individually fine-tuned if colors still do not appear as anticipated.
Picture Quality and coloring Settings Adjusting the White Balance Bracket recording using White Balance Bracket settings are performed based on the fine adjustment values for White Balance, and three pictures with different coloring are automatically recorded when the shutter button is pressed once.
Picture Quality and coloring Settings Setting the picture quality and size Changing the aspect ratio of the still pictures Recording mode: This allows you to select the aspect ratio of the pictures to suit printing or the playback method. → [Rec] → [Aspect Ratio] [4:3] Aspect ratio of a 4:3 TV [3:2] Aspect ratio of standard film cameras [16:9] Aspect ratio of high-definition TV, etc.
Picture Quality and coloring Settings Setting the picture quality and size Setting the compression rate of pictures ([Quality]) Recording mode: Set the compression rate used for storing pictures. → [Rec] → [Quality] Settings [ ] [ ] JPEG [ ] [ ] [ ] File format Description Gives priority to picture quality and saves pictures in JPEG file format. Saves pictures in JPEG file format using standard picture quality.
Picture Quality and coloring Settings Setting the picture quality and size ●●When you play back a picture recorded with [ ], the gray area is displayed according to the aspect ratio of the picture during recording. ●●The setting is fixed to [ ] when recording 4K photos or recording in [Post Focus]. ●●The following effects cannot be used on RAW file pictures. •• Intelligent Auto Plus Mode •• Creative Control Mode •• White Balance •• [Photo Style]*1, [Aspect Ratio], [Highlight Shadow]*1, *2, [i.
Picture Quality and coloring Settings Using the picture correction functions effectively Compensation effect may not be achieved depending on the conditions. Correcting contrast and exposure ([i.Dynamic]) Recording mode: Automatically adjusts contrast and exposure to give more lifelike colors when there is significant contrast between background and subject. → [Rec] → [i.
Picture Quality and coloring Settings Using the picture correction functions effectively Combining still pictures with different exposures ([HDR]) Recording mode: The camera can combine 3 still pictures taken at different exposures into a single properly exposed picture with rich gradation. The individual pictures used to create the HDR picture are not saved.
Picture Quality and coloring Settings Using the picture correction functions effectively ZS100 Suppressing the noise of a long exposure ([Long Shtr NR]) Recording mode: The camera can automatically eliminate the noise made when taking pictures with a slower shutter speed (e.g. to record night scenes) in order to take sharp pictures.
Picture Quality and coloring Settings Using the picture correction functions effectively ZS100 Setting the color space Recording mode: You can set the method for reproducing the colors to correctly display the recorded pictures on the screens of a PC or printer, etc. → [Rec] → [Color Space] [sRGB] Sets the sRGB color space. This setting is widely used for devices such as PCs. [AdobeRGB] Sets the AdobeRGB color space. AdobeRGB color space has a wider color reproduction range than sRGB color space.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ZS100 ZS60 Recording mode: Recording mode: By setting the optimum Focus Mode or Auto Focus Mode for the subject or recording condition, you can let the camera automatically adjust focus in various scenes.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ●●When the [AFS/AFF/AFC] in [Rec] menu is set to [AFF] or [AFC]. •• A beep will be emitted when focus is first achieved during the pressing halfway. •• ZS100 If Auto Focus Mode is set to [ ] or to a Custom Multi setting like [ ], the AF area will be displayed momentarily only the first time the picture is focused while the button is pressed halfway.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Set the focusing operation to be performed when the shutter button is pressed halfway (AFS, AFF, AFC) Recording mode: → Settings [Rec] → [AFS/AFF/AFC] The movement of the subject and the scene (recommended) Description [AFS] Subject is still (Scenery, anniversary photograph, etc.) “AFS” is an abbreviation of “Auto Focus Single”. Focus is set automatically when the shutter button is pressed halfway.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Switching [AF Mode] Recording mode: This allows the focusing method that suits the positions and number of the subjects to be selected. 1 Set the menu → 2 [Rec] → [AF Mode] Press to select Auto Focus mode and press [MENU/SET] •• •• ZS100 If you press when [ ], [ ], [ ], or [ ] is selected, or touch the screen, the AF area setting screen appears.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Taking front-on pictures of people (Face/Eye Detection) The camera automatically detects the faces and eyes of subjects. The camera adjusts the focus on the eye that is closer to the camera and the exposure using the face (when [Metering Mode] is set to [ ] (Multi Metering)). ••The camera can detect up to 15 faces. The camera can detect only the eyes of faces to be focused on.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Automatically locking the focus on a moving subject (Tracking) With cursor button operations Align the AF Tracking frame with the subject and press the shutter button halfway When the subject is recognized, the AF Tracking frame changes from white to yellow, and the subject is automatically kept in focus. •• To release AF Tracking → Press [MENU/SET].
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Subject not centered in picture (49-area-focusing) Focuses on the subject in the wide range area (up to 49-areafocusing) on the recording screen. ●●You can select the focusing area.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ZS100 Setting the shape of an AF area , etc. (Custom Multi) You can set the preferred shape of an AF area by selecting 49 points in the AF area, based on the subject. 1 Set the menu → [Rec] → [AF Mode] 2 Select a Custom Multi icon ([ 3 Use •• When you press to select the setting item ([Horizontal Pattern]) Horizontal line shape Ideal shape for panning, etc.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus 5 Select the AF area ]/[ When selecting [ ]/[ ] You can set the size and position of the area in the vertical direction ] is selected, in the horizontal direction when [ ] is when [ ] is selected. selected, and in all directions when [ Operation Touch operation Description Touch Moves position Pinch out / Pinch in [DISP.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Determined position for focus (Pinpoint-focusing) (1-area-focusing) / ZS100 ZS60 Determined position for focus (1-area-focusing) (1-area-focusing) Focuses on AF area in center of picture. (Recommended when focus is difficult to align) ••You can change the position and size of the AF area. (→157) Locking the focus If a subject you want to record is not in the center, follow the steps below.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Changing the position and size of the AF area Recording mode: ZS100 When [ ], [ ], [ ], or [ and size of the AF area. ZS60 When [ ], [ ] or [ size of the AF area. ] in Auto Focus Mode is selected, you can change the position ] in Auto Focus Mode is selected, you can change the position and ●●Perform these operations with the touch shutter function released.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ■■When selecting [ ]/[ ] You can change the position and size of the AF area. Set the menu → [Rec] → [AF Mode] Select [ ] or [ ] and press •• The AF area setting screen appears. •• You can also display the AF area setting screen by touching the screen. To change the AF area Operation Touch operation Touch — ZS100 ZS60 [DISP.] Description To move the position of the AF area.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ■■When selecting [ ] You can set the focus position by selecting an AF area group. The AF area, which is configured with 49 points, is divided into groups consisting of 9 points each (6 points or 4 points for the groups located at the edges of the screen). Set the menu → [Rec] → [AF Mode] Select [ Examples of group ] and press •• The AF area setting screen appears.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ■■ When selecting [ ] ZS100 You can enlarge the screen to perform more precise settings of the focus position. ••You cannot set the focus position at the edges of the screen. Set the menu → [Rec] → [AF Mode] Select [ ] and press Use to set the focus position and press [MENU/SET] •• The enlarged assist screen will appear for setting the focus position. •• The assist screen can also be displayed by touching the subject.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus ZS100 Changing the display of the assist screen → [Custom] → [Pinpoint AF Display] [FULL]: Enlarges the assist screen using the entire screen. [PIP]: Enlarges the assist screen on part of the screen. ••The display of the assist screen can also be switched by touching [ ZS100 ]. Setting the timeout for the enlarged display → [Custom] → [Pinpoint AF Time] → [LONG] (approx. 1.5 seconds) / [MID] (approx. 1.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Setting the AF area position with the touch pad Recording mode: You can move the AF area displayed on the viewfinder by touching the monitor. •• ZS100 If you touch the monitor when the Auto Focus Mode is set to [Custom Multi] such as [ ], the AF area setting screen will be displayed. (→153) → [Custom] → [Touch Settings] → [Touch Pad AF] [EXACT] Moves the AF area of the viewfinder by touching a desired position on the touch pad.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Optimizing the focus and brightness for a touched position Recording mode: You can optimize the focus and brightness for the position you have touched. 1 Set the menu → 2 3 [Custom] → [Touch Settings] → [Touch AF] → [AF+AE] Touch the subject you want to optimize the brightness for •• The AF area setting screen appears. (→157) •• The brightness optimization position is displayed on the center of the AF area.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Setting your preferred focusing method You can use the [Custom] menu to set the focusing method in detail.
Adjusting the focus and brightness (exposure) Taking pictures with Auto Focus Turning on/off the AF Assist Lamp → [Custom] → [AF Assist Lamp] → [ON] / [OFF] Illuminates the AF Assist Lamp when the shutter button is pressed halfway when it is too dark to facilitate focusing. (A large AF area is displayed based on recording conditions.) ●●The AF Assist Lamp has an effective distance of 1.5 m (4.9 feet). ●●AF Assist Lamp is effective for a subject at the center of the screen.
Adjusting the focus and brightness (exposure) Taking close-up pictures (Macro recording) Recording mode: This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of flowers. 1 Press [ ] button ( ) ZS100 ZS60 2 165 Press to select the item and press [MENU/SET] [ ] ([AF Macro]) You can take pictures of a subject as close as ZS100 5 cm 3 cm (0.098 feet) from the lens by rotating the (0.16 feet), ZS60 zoom lever upmost to Wide (1x).
Adjusting the focus and brightness (exposure) Taking close-up pictures (Macro recording) ●●When recording a subject close to the camera, we recommend taking a picture without using the flash. ●●A picture may be out of focus when the subject is out of focus range, even if the focus display is lit. ●●When a nearby subject is to be recorded •• Using a tripod and [Self Timer] (→208) is recommended. •• The effective focus range (depth of field) is significantly narrowed.
Adjusting the focus and brightness (exposure) Taking pictures with Manual Focus Recording mode: Manual Focus is convenient when you want to lock the focus to take pictures or when it is difficult to adjust focus using Auto Focus. 1 2 3 Press [ ] button ( ) ZS100 Press to select [MF] and press [MENU/SET] Touch the screen twice, set the focus position with , and press [MENU/SET] ZS60 ••The screen changes to the assist screen and an enlarged display appears.
Adjusting the focus and brightness (exposure) Taking pictures with Manual Focus 4 Turn the control ring to adjust focus ZS100 Turning the control ring to the right: Focusing on a nearby subject Turning the control ring to the left: Focusing on a distant subject ZS60 ••Color is added to the portions of the image that are in focus.
Adjusting the focus and brightness (exposure) Taking pictures with Manual Focus Operation Touch operation Drag — ZS100 ZS60 Description Moves the enlarged area. Pinch in / Pinch out Enlarges/reduces the AF area in small steps. — Enlarges/reduces the AF area in large steps. Switches the enlarged display. (windowed/full screen) — [DISP.] [Reset] Resets the area to be enlarged back to the center. ••The image of a part of the screen can be enlarged or reduced approximately 3 to 6 times.
Adjusting the focus and brightness (exposure) Taking pictures with Manual Focus Quickly adjusting the focus using Auto Focus In Manual Focus, the focus can be set on the subject through Auto Focus. (One shot AF) 1 Touch [ ] ●●Auto Focus is activated at the center of the frame. ●●When Auto Focus is activated on the MF Assist screen, the camera will adjust the focus at the center of the MF Assist screen. ●●Auto Focus also works with the following operations.
Adjusting the focus and brightness (exposure) Taking pictures with Manual Focus Technique for Manual Focus 1 Turn the control ring to focus on the subject Rotate it a little more 2 3 1 Finely focus on the subject by rotating it slowly in reverse ●● ZS100 ●● ZS60 2 3 After canceling [Sleep Mode], be sure to readjust the focus. After canceling [Auto Power Off], be sure to readjust the focus.
Adjusting the focus and brightness (exposure) Taking pictures with Manual Focus Enabling/disabling [Peaking] to add color to the portions of the image that are in focus → [Custom] → [Peaking] ●●[Peaking] functions during Manual Focus or when you are adjusting focus manually using [AF+MF]. [ON] Color is added to the portions of the image that are in focus. [OFF] The portions of the image that are in focus are not displayed. [Detect Level] The detection level for in-focus portions is set.
Adjusting the focus and brightness (exposure) ZS100 exposure Taking pictures by locking the focus and/or (AF/AE Lock) Recording mode: The AF/AE Lock function is convenient, for example, when there is too much contrast with the subject and you cannot get appropriate exposure (AE Lock) or when you want to take a still picture composed with the subject outside the AF area (AF Lock).
Adjusting the focus and brightness (exposure) ZS100 Taking pictures by locking the focus and/or exposure (AF/AE Lock) ●●AF Lock only is effective in the following case: •• Manual Exposure Mode ●●During Manual Focus, only AE Lock can be used. ●●The subject can be focused again by pressing the shutter button halfway, even when AE is locked. ●●Program Shift can be set even when AE is locked.
Adjusting the focus and brightness (exposure) ZS60 exposure Taking pictures by locking the focus and/or (AF/AE Lock) Recording mode: The AF/AE Lock function is convenient, for example, when there is too much contrast with the subject and you cannot get appropriate exposure (AE Lock) or when you want to take a still picture composed with the subject outside the AF area (AF Lock). Preparation To execute the AF/AE Lock function, it is necessary to register [AF/AE LOCK] to the function button.
Adjusting the focus and brightness (exposure) ZS60 Taking pictures by locking the focus and/or exposure (AF/AE Lock) ●●AF Lock only is effective in the following case: •• Manual Exposure Mode ●●During Manual Focus, only AE Lock can be used. ●●The subject can be focused again by pressing the shutter button halfway, even when AE is locked. ●●Program Shift can be set even when AE is locked.
Adjusting the focus and brightness (exposure) Taking pictures with Exposure Compensation Recording mode: Corrects the exposure when there is a backlight or when the subject is too dark or too bright.
Adjusting the focus and brightness (exposure) Taking pictures with Exposure Compensation 3 Press [MENU/SET] to set ••You can also press the shutter button halfway to set. ●●You can set the exposure compensation value in the range between –5 EV and +5 EV. Settings can be made within a range of – 3 EV to +3 EV while recording motion pictures, recording 4K photos, or recording in [Post Focus]. ●●Depending on the brightness, this may not be possible in some cases.
Adjusting the focus and brightness (exposure) Setting the ISO Sensitivity Recording mode: Set ISO sensitivity (sensitivity to lighting) manually. We recommend higher settings to take clear pictures in darker locations. 1 2 Set the menu → [Rec] → [Sensitivity] ZS100 Select the ISO sensitivity by rotating the rear dial ZS60 3 Select the ISO sensitivity by rotating the control dial ISO sensitivity Press [MENU/SET] ••You can also press the shutter button halfway to set.
Adjusting the focus and brightness (exposure) Setting the ISO Sensitivity Setting guide ZS100 ISO sensitivity Location (recommended) [125] [12800] Bright (outdoors) Dark Shutter speed Slow Fast Interference Low High Subject blur High Low [80] [3200] Bright (outdoors) Dark ZS60 ISO sensitivity Location (recommended) Shutter speed Slow Fast Interference Low High Subject blur High Low ●●For details on the available flash range used when the ISO sensitivity is set to [AUTO], refer
Adjusting the focus and brightness (exposure) Setting the ISO Sensitivity Setting the upper limit of ISO Sensitivity Recording mode: You can set the upper limit of ISO sensitivity when ISO sensitivity is set to [AUTO] or [ ].
Adjusting the focus and brightness (exposure) Setting the ISO Sensitivity Extending the ISO Sensitivity setting Recording mode: You can extend the numeric values that can be set for ISO Sensitivity. → [Rec] → [Extended ISO] Settings: [ON] / [OFF] ●●The setting cannot be made during 4K photo recording or recording in [Post Focus].
Adjusting the focus and brightness (exposure) Setting the metering mode Recording mode: You can change the metering method used for measuring brightness. → [Rec] → [Metering Mode] [Metering Mode] (Multiple) (Center weighted) Brightness measurement position Conditions Whole screen Normal usage (produces balanced pictures) Center and surrounding area Subject in center Center of [+] (spot metering target) (Spot) 183 Great difference between brightness of subject and background (e.g.
Recording 4K Photos Recording 4K Photos Recording mode: You can select the desired moment from a burst of 4K photos taken at 30 frames/second and save that moment as a picture of approx. 8 million pixels. Record a 4K photo Select and save pictures The picture is complete ••To record pictures, use a UHS Speed Class 3 card. (→37) ••When recording 4K photos, the angle of view becomes narrower.
Recording 4K Photos Recording 4K Photos [4K Burst] (→187) For capturing the best shot of a fast-moving subject (e.g., sports, aeroplanes, trains) Burst recording is performed while the shutter button is pressed and held. The shutter sound will be heard repeatedly. Press and hold Recording is performed Continuous recording length: Up to 15 minutes [4K Burst(S/S)] (→188) “S/S” is an abbreviation of “Start/Stop”. For capturing unpredictable photo opportunities (e.g.
Recording 4K Photos Recording 4K Photos 3 Record a 4K photo ••Recording with [ ] ([4K Burst]) (→187) ••Recording with [ ] ([4K Burst(S/S)]) (→188) ••Recording with [ ] ([4K Pre-Burst]) (→189) ••When you perform 4K burst photo recording, a 4K burst file will be saved in the MP4 format. ••When [Auto Review] is enabled, the picture selection screen will be displayed automatically. To continue recording, press the shutter button halfway to display the recording screen.
Recording 4K Photos Recording 4K Photos Recording with [4K Burst] 1 2 Select [ 3 Press and hold the shutter button fully for as long as you want to perform recording ] ([4K Burst]) (→184) 60p Press the shutter button halfway Available recording time •• Recording will start approximately 0.5 seconds after you press the shutter button fully. Therefore, press the button fully as soon as possible. •• A 4K burst file will be recorded while the shutter button is pressed and held.
Recording 4K Photos Recording 4K Photos Recording with [4K Burst(S/S)] 1 2 Select [ 3 Press the shutter button fully again ] ([4K Burst(S/S)]) (→184) 60p Press the shutter button fully •• Recording will start. •• If you are using Auto Focus, continuous AF will work while recording. Focus will be adjusted continuously. Available recording time •• Recording will stop. Recording tips Adding markers to select and save pictures When you press the [Fn1] button while recording, you can add a marker.
Recording 4K Photos Recording 4K Photos Recording with [4K Pre-Burst] 1 Select [ 2 Press the shutter button fully ] ([4K Pre-Burst]) (→184) 60p •• When you press the shutter button halfway, the aperture value and shutter speed are displayed. •• Recording of a 4K burst file will be performed for approximately 1 second before and after the moment that the shutter button is pressed.
Recording 4K Photos Recording 4K Photos Selecting pictures from 4K burst file and saving ••The picture will be saved in JPEG format. ••The picture will be saved with recording information (Exif information), including its shutter speed, aperture and ISO sensitivity information. Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play back only 4K burst files and pictures created from them.
Recording 4K Photos Recording 4K Photos Position of the displayed frame Operation Touch operation ZS100 Touch → Drag ZS60 Displays the previous or next frames in slide view •• The previous or next 45 frames (burst time of approximately 1.5 seconds) will replace 45 of the frames that are currently displayed in slide view. •• Pressing the same button again will display the frames following the next ones or the ones preceding the previous ones.
Recording 4K Photos Recording 4K Photos •• During marker operation, you can skip to the markers that you added or the beginning or end of the 4K burst file. Press [Fn1] button again to return to the original operation. Operation Touch operation Description Moves to the next marker. Moves to the previous marker. •• When you have selected frames that are not currently displayed in slide view, such as when you have selected [ ] or [ ], it may take a few seconds until the slide view frames are displayed.
Recording 4K Photos Recording 4K Photos <4K burst playback screen> During pause Operation During continuous playback Touch operation Description Continuous playback Continuous rewind •• Frames are rewound in approximately 0.5 second intervals at a faster speed than that of continuous playback.
Recording 4K Photos Recording 4K Photos 4K burst files recorded with [ 1 2 ] ([4K Pre-Burst]) Select a 4K burst file on the playback screen, and press •• [ ] is displayed on a 4K burst file. ]. •• The same operation can be performed by touching [ •• The slide view screen for selecting pictures will be displayed. It takes a few seconds until the screen is displayed.
Recording 4K Photos Recording 4K Photos ■■Selecting and saving pictures on the TV screen Preparation Set [HDMI Mode (Play)] (→82) to [AUTO] or [4K]. •• When connecting to a TV that does not support 4K motion picture, select [AUTO]. Connect this unit to a TV using an HDMI micro cable and display the playback screen (→348) •• If you want to select and save pictures while the camera is connected to a TV with the HDMI micro cable, set [VIERA Link] of [TV Connection] in the [Setup] menu to [OFF].
Recording 4K Photos Recording 4K Photos Notes on the 4K Photo function ■■To change the aspect ratio Selecting [Aspect Ratio] in the [Rec] menu allows you to change the aspect ratio for 4K photos. ■■To record the subject with reduced blur You can reduce the blur of the subject by setting a faster shutter speed.
Recording 4K Photos Recording 4K Photos ■■Limitations on the 4K Photo function To optimize settings for 4K photo recording, certain limitations apply to some recording functions, menu items and other settings. ••The following settings are fixed.
Recording 4K Photos Recording 4K Photos ••The following menu items are disabled: Applicable to [ ] ([4K Burst])/[ ] ([4K Burst(S/S)])/[ ] ([4K Pre-Burst]) [Rec] [Picture Size], [Quality], [AFS/AFF/AFC], [iHandheld Night Shot], [iHDR], [HDR], [Panorama Settings], [Shutter Type], [Flash]*1, [Flash Adjust.]*2, [Extended ISO], [Long Shtr NR]*1, [Color Space]*1, [Face Recog.
Shutter and Drive Settings Setting the Shutter Type Recording mode: You can take pictures using two types of shutter modes: the mechanical shutter and electronic shutter. Mechanical shutter Starts the exposure electronically and ends the exposure using the mechanical shutter. Description Flash Electronic shutter Starts and ends the exposure electronically.
Shutter and Drive Settings Setting the Shutter Type ●●In the following cases, recording is performed with an electronic shutter. •• [ ] is displayed on the screen •• When [Burst Rate] is set to [SH] •• When recording 4K photos •• When recording using [Post Focus] •• When [Silent Mode] is set to [ON] ●●If you take a picture of a moving subject using the electronic shutter, the subject in the picture may be skewed in some cases.
Shutter and Drive Settings Selecting a Drive Mode Recording mode: You can switch the operation to be performed when you press the shutter button. 1 2 Press [ ] button ( ) ZS100 Press to select the drive mode and press [MENU/SET] [Single] When the shutter button is pressed, only one picture is recorded. [Burst] (→202) The pictures are recorded in succession while the shutter button is pressed. [4K PHOTO] (→184) When the shutter button is pressed, a 4K photo is recorded.
Shutter and Drive Settings Burst function Recording mode: The pictures are recorded in succession while the shutter button is pressed. ••Pictures that are taken while the burst speed is set to [SH] are recorded together as a single burst group (→275). 1 2 Press to select an item ([ and press 3 Press to select the burst speed and press [MENU/SET] Press [ ] button ( ) ], etc.) ZS100 Speed (pictures/ sec.
Shutter and Drive Settings Burst function ZS60 Speed (pictures/ sec.) [SH] (Super high speed)*1 [H] (High speed) [M] (Middle speed) [L] (Low speed) [AFS] 40 10 5 2 [AFF] / [AFC] ― 5 5 2 None None Available Live View during burst recording Number of With RAW files recordable Without RAW pictures*2 files Available ― 12* 60 Depends on the capacity of the card*3 3 *1 The electronic shutter starts working, and the [Picture Size] is set to [S].
Shutter and Drive Settings Burst function Focusing in burst mode Focusing varies depending on the [AFS/AFF/AFC] in [Rec] menu (→148) and the setting of [Focus/Release Priority] (→164) in the [Custom] menu. If the focus mode is [MF], the focus is set manually.
Shutter and Drive Settings Burst function ●●When the burst speed is set to [H] and if many burst pictures are taken, the burst speed may be reduced while burst pictures are being taken. ●●When the burst speed is set to [SH] or [H] ([AFS/AFF/AFC] in [Rec] menu is set to [AFS] or the focus mode is set to [MF]), and the exposure and White Balance are fixed to those of the first picture.
Shutter and Drive Settings Recording while exposure is changed automatically [Auto Bracket] Recording mode: Each time the shutter button is pressed, recordings are made of up to 7 pictures with different exposure settings based on the Exposure Compensation range.
Shutter and Drive Settings Recording while exposure is changed automatically [Auto Bracket] ■■ Changing the Single/Burst setting, compensation range, and recording ZS100 sequence of Auto Bracket Set the menu → [Rec] → [Auto Bracket] Press to select [Single/Burst Settings], [Step] or [Sequence] and press [MENU/SET] Press to select the setting and press [MENU/SET] [Single/Burst Settings] (single) (burst) 3·1/3 3·2/3 3·1 5·1/3 [Step] 5·2/3 5·1 7·1/3 7·2/3 7·1 (3 pictures) (3 pictures) (3 pictures) (5 pic
Shutter and Drive Settings Taking pictures with self-timer Recording mode: We recommend using a tripod. This is also effective for preventing jitter when pressing the shutter button, by setting the self-timer to 2 seconds. 1 2 Press to select an item ([ and press 3 Press to select the self-timer operation setting and press [MENU/SET] Press [ ] button ( ) ], etc.) The shutter is activated after 10 seconds.
Shutter and Drive Settings Taking pictures with self-timer 4 Press the shutter button halfway to focus, and press it fully to start recording ••The focus and exposure are fixed when the shutter button is pressed halfway. ••After the self-timer indicator flashes, recording will start. ZS100 ZS60 ■■To cancel self-timer In step 2, select [ ] ([Single]) or [ ]. ••You can cancel the self-timer by turning off the camera. (When [Self Timer Auto Off] (→85) is set to [ON].
Functions for specific subjects and purposes Saving a picture by selecting a focus point after recording [Post Focus] Recording mode: You can record bursts of photos with the same quality as a 4K photo while automatically changing the focus point ([Post Focus] recording). After recording, you can select a point on the screen to save a picture with that point as the focus point. This function is best for non-moving subjects.
Functions for specific subjects and purposes Saving a picture by selecting a focus point after recording [Post Focus] 4 Press the shutter button fully to start recording Recording progress bar •• The focus point changes automatically while recording. When the recording progress bar disappears, recording automatically ends. •• A motion picture will be recorded in MP4 format. (No audio is recorded.) •• If Auto Review is set, a screen will automatically appear that lets you select the focus point.
Functions for specific subjects and purposes Saving a picture by selecting a focus point after recording [Post Focus] ••The following limitations apply to the recording functions indicated below.
Functions for specific subjects and purposes Saving a picture by selecting a focus point after recording [Post Focus] ●●The following changes occur when [Post Focus] recording: •• The [i.Resolution] setting changes from [EXTENDED] to [LOW]. •• [Destination] in [Travel Date] cannot be recorded. •• [Simultaneous record w/o filter] is not available. •• It is not possible to use the HDMI output. ●●Scene Detection in Intelligent Auto Mode works the same way as when recording motion pictures.
Functions for specific subjects and purposes Saving a picture by selecting a focus point after recording [Post Focus] Select the focus point and save the picture 1 On the playback screen, select the image with the [ ] icon and press •• The same operation can be performed by touching [ 2 ]. Select the focus point by touching it •• The picture will be displayed with the focus on the selected point.
Functions for specific subjects and purposes Saving a picture by selecting a focus point after recording [Post Focus] Making fine adjustments to focus You can enlarge and make fine adjustments to the focus of the picture that you touched to display in Step 2 of “Select the focus point and save the picture”(→214) 1 Touch [ 2 Drag the slide bar to make fine adjustments to focus 3 Touch [ ] •• The picture can be enlarged. •• The same operation can be performed using .
Functions for specific subjects and purposes Taking pictures automatically at set intervals [Time Lapse Shot] Recording mode: You can preset data such as recording start time and time lapse to take still pictures automatically. This setting is convenient for taking pictures at constant intervals for landscape scenes, observation of the gradual changes in animals/plants, and other applications. The pictures are recorded as a set of group pictures (→275).
Functions for specific subjects and purposes Taking pictures automatically at set intervals [Time Lapse Shot] 4 Press the shutter button fully ••The recording starts automatically. ••During recording standby, the camera turns off automatically when no operation is performed for a preset interval. The [Time Lapse Shot] recording will continue even if the camera is turned off, and the camera is automatically turned on at the recording start time.
Functions for specific subjects and purposes Taking pictures automatically at set intervals [Time Lapse Shot] ●●This function is not intended for application-specific systems (monitoring cameras). ●●If you leave the camera unattended during [Time Lapse Shot] recording, make sure that the camera is not stolen.
Functions for specific subjects and purposes Creating stop motion animation [Stop Motion Animation] Recording mode: You can stitch still pictures to create stop motion animation. ••Complete the date and time settings in advance. (→42) ••Still pictures that were captured using frame-by-frame recording are grouped into a single picture group.
Functions for specific subjects and purposes Creating stop motion animation [Stop Motion Animation] 4 5 6 Press to select [New] and press [MENU/SET] Press the shutter button fully ••Up to 9,999 frames can be recorded. Move the subject to decide on the composition ••Repeat the recording of still pictures in the same way. ••When you turn off the camera during recording, a message to restart recording will appear when you turn on the camera. To start recording from the next still picture, select [Yes].
Functions for specific subjects and purposes Creating stop motion animation [Stop Motion Animation] 8 Select a method to create a stop motion animation ••[Rec Format]: [MP4] [Rec Quality] 9 Sets the picture quality of the motion picture. [4K/30p] / [4K/24p]*1 / [FHD/60p] / [FHD/30p] / [HD/30p] / [VGA/30p] *1 ZS100 [Frame Rate] Set the number of frames per second. When you set a higher number, you can create a more seamless animation. [60fps]*2 / [30fps] / [15fps] / [10fps] / [7.
Functions for specific subjects and purposes Creating stop motion animation [Stop Motion Animation] ●●[Auto Shooting] may not be performed according to the preset interval because recording could take time under some recording conditions, such as when pictures are taken using a flash.
Functions for specific subjects and purposes Performing multiple exposures for a single ZS100 picture [Multi Exp.] Recording mode: You can create an effect similar to the operation of up to four times of exposure on a single picture. 1 Set the menu 2 3 Press → [Rec] → [Multi Exp.] to select [Start] and press [MENU/SET] Decide on your composition and take the first picture ••After recording the first picture, press the shutter button halfway to proceed to the next recording.
Functions for specific subjects and purposes ZS100 Performing multiple exposures for a single picture [Multi Exp.] ■■About the automatic gain compensation setting Select [Auto Gain] on the screen in step 2 of “Performing multiple exposures for a single picture” (→223). ••[ON]: Combines several pictures into one by automatically adjusting the brightness in accordance with the number of pictures taken.
Functions for specific subjects and purposes Disabling the beeps and flash at the same time [Silent Mode] Recording mode: This mode is useful when you are taking pictures in a quiet environment or public facilities or when you take pictures of a subject such as a baby or animal. 1 Set the menu → [Custom] → [Silent Mode] Settings: [ON] / [OFF] ••This mode will mute beeps, set the flash to [ ] (Forced Flash Off), and disable AF Assist Lamp.
Functions for specific subjects and purposes Recording with the Face Recognition function [Face Recog.] Recording mode: The Face Recognition function recognizes a face similar to a registered face and automatically adjusts focus and exposure for the face with higher priority. Even if a person you want to focus on is standing at the back or corner in a group photo, the camera will automatically recognize the person and record this person’s face clearly. 1 Set the menu → [Rec] → [Face Recog.
Functions for specific subjects and purposes Recording with the Face Recognition function [Face Recog.] ●●This function is not available in the following cases: •• [Miniature Effect] (Creative Control Mode) •• During motion picture recording •• When recording 4K photos •• When recording using [Post Focus] •• When using [Time Lapse Shot] Registering face pictures Up to 6 people’s face pictures can be registered along with such information as name and birthdate.
Functions for specific subjects and purposes Recording with the Face Recognition function [Face Recog.] 4 Use to select the item for editing and press [MENU/SET] [Name] Use to select [SET] and press [MENU/SET] Enter the name (See “Entering Text”: (→87)) [Age] Set the birthdate. Use to select [SET] and press [MENU/SET] Use to select year, month and day, set with [MENU/SET] [Add Images] , and press Up to 3 face pictures of the person can be registered.
Functions for specific subjects and purposes Setting the profile for a baby or pet to record in a picture Recording mode: You can set a name or birthday of a baby or pet before taking a picture to record the name or age in months/years in the picture.
Functions for specific subjects and purposes Displaying the appropriate screen for specific recording conditions Checking the area where overexposure may occur ([Zebra Pattern]) Recording mode: You can check the area in a picture that is brighter than a certain brightness, which could result in overexposure, by displaying such an area using a zebra pattern. You can also set the brightness to be represented by the zebra pattern.
Functions for specific subjects and purposes Displaying the appropriate screen for specific recording conditions Setting a monochrome display for the recording screen ([Monochrome Live View]) Recording mode: You can display the recording screen in black and white. This function is useful when a black and white screen will make it easier to adjust focus in Manual Focus mode.
Functions for specific subjects and purposes ZS100 Recording while monitoring camera images Recording mode: When using the HDMI output, you can take pictures while monitoring the camera image on a TV, etc. ■■To connect with an HDMI micro cable Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction, the plug could become deformed and cause faulty operation.) Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
Functions for specific subjects and purposes ZS100 Recording while monitoring camera images ●●When using the Auto Focus Mode [ ] or MF assist, the screen cannot be enlarged in windowed mode. ●●[Aspect Ratio] in the [Rec] menu is fixed to [16:9]. ●●An electronic sound or shutter sound will not sound. ●●If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the camera monitor. ●●The scene selection screen in Scene Guide Mode is not output through the HDMI connection.
Stabilizer, Zoom and Flash Correcting jitter Recording mode: Automatically detects and prevents jitter. 1 Set the menu 2 Use → (Normal) (Panning) [OFF] [Rec] → [Stabilizer] to select the item and press [MENU/SET] Corrects vertical and horizontal jitter. Corrects vertical jitter. This setting is ideal for panning (technique of recording a subject by matching the camera movement with the movement of a subject going in a specific direction). We recommend using the Viewfinder.
Stabilizer, Zoom and Flash Correcting jitter ●●When you use a tripod, we recommend setting [Stabilizer] to [OFF]. [ ] is displayed on the screen at that time. ●●[Stabilizer] cannot be used by selecting [ ] (Normal) in Panorama Shot Mode.
Stabilizer, Zoom and Flash Using Zoom Zoom types and use The zoom ratio changes when the picture size is changed. Optical Zoom Recording mode: You can zoom in without degrading the picture quality. Maximum magnification: ZS100 10x ZS60 30x ●●This function is not available in the following case: •• When recording with [Macro Zoom] Extended optical zoom Recording mode: This function works when picture sizes with [ ] have been selected in [Picture Size] (→139).
Stabilizer, Zoom and Flash Using Zoom To increase the zoom ratio further, the following zoom can be used in combination. [i.Zoom] Recording mode: You can use the camera’s Intelligent Resolution technology to increase the zoom ratio up to 2x higher than the original zoom ratio with limited deterioration of picture quality. → [Rec] / [Motion Picture] → [i.
Stabilizer, Zoom and Flash Using Zoom [Digital Zoom] Recording mode: Zoom 4x further than Optical/Extended optical zoom. When [Digital Zoom] is used simultaneously with [i.Zoom], you can only increase the zoom ratio up to 2x. Note that, with Digital Zoom, enlarging will decrease picture quality. → [Rec] / [Motion Picture] → [Digital Zoom] → [ON] / [OFF] ●●When using [Digital Zoom], we recommend using a tripod and the self-timer (→208) for taking pictures.
Stabilizer, Zoom and Flash Using Zoom Changing the zoom operation settings → [Custom] → [Zoom lever] The zoom operates in the normal way. Each time zoom is operated, the zoom stops at the position for one of the preset focal lengths. (Zoom) (Step Zoom) •• This setting does not work when recording motion pictures or 4K ] ([4K Pre-Burst]). photos with [ Current zoom position Focus range ••The zoom or step zoom setting can be assigned to the control ring.
Stabilizer, Zoom and Flash Using Zoom Using the zoom by performing touch operations (Touch zoom) 1 2 Touch [ ] 3 Perform zoom operations by dragging the slide bar Touch [ ] •• The slide bar is displayed. •• The zoom speed varies depending on the touched position. [ ]/[ ] Slow zooming [ ]/[ ] Fast zooming •• Touch [ ] again to end touch zoom operations. ●●When the zoom operation of the [Zoom lever] is set to Step Zoom (→239), a slide bar for step zoom appears.
Stabilizer, Zoom and Flash Taking pictures with flash Recording mode: With the flash you can take pictures in dark places or adjust the entire contrast of a picture by illuminating a subject with a bright background. ■■ ZS100 Open/Close the built-in flash To open the flash Slide the flash open lever. •• Be careful when opening the flash as the flash will jump out. To close the flash Press the flash until it clicks.
Stabilizer, Zoom and Flash Taking pictures with flash About [ ] (Forced Flash Off) ●●When pictures cannot be taken using the flash because the flash is closed or during motion picture recording, etc., [ ] (Forced Flash Off) is displayed on the recording screen and the flash will not fire. ●● ZS100 ●● ZS60 Close the flash in places where its use is prohibited so that it will not fire. Press fire.
Stabilizer, Zoom and Flash Setting the Flash Functions Changing Flash Mode Set the flash to match the recording. Recording mode: Set the menu ZS100 1 2 → Press [Rec] → [Flash] → [Flash Mode] to select the item and press [MENU/SET] : [Forced Flash On] : [Forced On/Red-Eye]* : [Slow Sync.] : [Slow Sync./Red-Eye]* Always takes pictures using the flash. •• Ideal for taking pictures with a backlight or when a subject is located under bright lighting such as a fluorescent light.
Stabilizer, Zoom and Flash Setting the Flash Functions ZS60 1 2 Recording mode: Press [ ] button ( Use ) to select the desired type and press [MENU/SET] : [Auto] : iAuto*1 : [Auto/Red-Eye]*2 : [Forced Flash On] : [Forced On/Red-Eye]*2 : [Slow Sync.] : [Slow Sync./Red-Eye]*2 : [Forced Flash Off] The flash is automatically activated when the recording conditions make it necessary.
Stabilizer, Zoom and Flash Setting the Flash Functions ■■Reducing red-eye Recording mode: ZS100 Automatically detects red-eye and corrects still picture data when recording with flash red-eye reduction ([ ], [ ]). ZS60 Automatically detects red-eye and corrects still picture data when recording with flash red-eye reduction ([ ], [ ] or [ ]).
Stabilizer, Zoom and Flash Setting the Flash Functions ■■ ZS100 Flash settings for each Recording mode (○: Available, –: Not available) Recording mode –* Intelligent Auto Mode –* Intelligent Auto Plus Mode Program AE Mode Aperture-Priority AE Mode ○ ○ ○ ○ ○ ○ ○ ○ Shutter-Priority AE Mode ○ ○ – – ○ – – – ○ ○ – ● – ○ – – – – – – – – – – – – ● ● ● ● ● ● ○ – – – ● ● – – – ● – – – – – – – – – – – – – – – – – ○ – – – – – – – – – – – – – – – – – – – – – – – – – – – ○ – – – – – – – – – – – – – –
Stabilizer, Zoom and Flash Setting the Flash Functions ■■ ZS60 Flash settings for each Recording mode (○: Available, –: Not available) Recording mode –*1 Intelligent Auto Mode ○ –*1 Intelligent Auto Plus Mode ○ Program AE Mode Aperture-Priority AE Mode ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Shutter-Priority AE Mode ○ ○ – – ○ ○ – – – ○ ○ – ●*2 – ○ – – – – – – – – – – – – ●*3 ●*3 ●*3 ●*3 ●*3 ●*3 ○ – – – ●*4 ●*4 – – – ●*4 – – – – – – – – – – – – – – – – – ○ – – – – – – – – – – – – – – – – – – – – – – – –
Stabilizer, Zoom and Flash Setting the Flash Functions ■■Shutter speeds for each flash mode Flash Mode Shutter speed (seconds) Flash Mode Shutter speed (seconds) 1 - 1/16000 *1 1/60*2 - 1/2000 60*3 - 1/16000 * 1 * *2 1 ZS60 ZS100 The shutter speed is set to 60 seconds in Shutter-Priority AE Mode and to T (Time) in Manual Exposure Mode. ZS60 *3 The shutter speed is set to 4 seconds in Shutter-Priority AE Mode. ZS100 The shutter speed is set to T (Time) in Manual Exposure Mode.
Stabilizer, Zoom and Flash Setting the Flash Functions Setting the 2nd curtain sync ZS100 Recording mode: 2nd curtain sync is a recording method in which the flash fires just before the shutter closes when you take a picture of a moving subject (such as a car) using the flash with a slow shutter speed. 1 Set the menu → 2 [Rec] → [Flash] → [Flash Synchro] Press to select the setting item and press [MENU/SET] [1ST] 1st curtain sync is the normal recording method when using the flash.
Stabilizer, Zoom and Flash Setting the Flash Functions Adjusting the flash output Recording mode: Adjust the flash output if a picture taken using the flash is too bright or too dark. 1 Set the menu ZS100 → [Rec] → [Flash] → [Flash Adjust.] → [Rec] → [Flash Adjust.] ZS60 2 Press to set the flash output and press [MENU/SET] Settings: -2 EV to +2 EV (unit: 1/3 EV) When you do not want to adjust the intensity of the flash, select [±0 EV].
Recording motion pictures Recording motion pictures Recording mode: You can record full high-definition quality images that comply with the AVCHD standard, as well as motion pictures recorded in MP4. You can also record a 4K motion picture in MP4. (→254) Audio is recorded in stereo. 1 2 Press the motion picture button to start recording ••Recording of motion picture appropriate for each motion picture mode is possible. ••Immediately release the motion picture button after pressing it.
Recording motion pictures Recording motion pictures Switching the angle of view setting used for recording still pictures and motion pictures → [Custom] → [Rec Area] → [ ] (Picture) / [ ] (Motion picture) ●●If the aspect ratio is different for still pictures and motion pictures, the angle of view will change when starting to record a motion picture. When you set [Rec Area] to [ ], the angle of view setting used for recording motion pictures is displayed.
Recording motion pictures Recording motion pictures ●●If the surrounding temperature is high, or a motion picture is recorded continuously, [ ] is displayed and recording may be stopped halfway through to protect the camera. Wait until the camera cools down. ●●If Extended optical zoom is used before pressing the motion picture button, these settings will be cleared, and the recordable area will be changed significantly.
Recording motion pictures Recording motion pictures Recording 4K motion pictures Recording mode: You can record high-resolution 4K motion pictures by setting [Rec Quality] to [4K]. ••To record 4K motion pictures, use a UHS Speed Class 3 card. (→37) ••When you record 4K motion pictures, the angle of view will be narrower than motion pictures of other sizes.
Recording motion pictures Recording motion pictures Setting the format, picture size and recording frame rate Recording mode: 1 Set the menu 2 Use 3 4 → [Motion Picture] → [Rec Format] to select the item and press [MENU/SET] [AVCHD] This is a data format suitable for playback on high-definition TVs. [MP4] This data format is suited for playing back motion pictures on a computer and other such devices.
Recording motion pictures Recording motion pictures ••The quality becomes higher when the number of bit rate gets bigger. This unit uses the “VBR” recording method, and the bit rate is changed automatically depending on the subject to record. Therefore, the recording time is shortened when a subject with fast movement is recorded.
Recording motion pictures Recording motion pictures Adjusting the focus while recording motion pictures ([Continuous AF]) Recording mode: Focusing varies depending on the setting of [AFS/AFF/AFC] (→148) in the [Rec] menu and the setting of [Continuous AF] in the [Motion Picture] menu. If the focus mode is [MF], the focus can be set manually. (→167) [AFS/AFF/AFC] [AFS]/[AFF]/ [AFC] [Continuous AF] Setting [ON] Allow the focus to be constantly adjusted automatically while recording motion pictures.
Recording motion pictures Recording pans with little vibration or recording motion pictures with zoom [4K Live Cropping] Recording mode: You can pan while recording subjects without horizontal shaking of the camera, and you can zoom in and out during motion picture recording without using zoom.
Recording motion pictures Recording pans with little vibration or recording motion pictures with zoom [4K Live Cropping] 4 Set the crop start frame Operation Touch operation Touch ZS100 [DISP.] [Reset] [MENU/SET] [Set] Enlarges/reduces the frame (The range of settings allowed is from 1920×1080 to 3840×2160.) The frame will return to the size of 1920×1080, with the position of the frame as its center.
Recording motion pictures Recording pans with little vibration or recording motion pictures with zoom [4K Live Cropping] 6 Press the motion picture button to start recording The display switches to the angle of view set in step 4 and the panning or zoom operation is displayed. ••Immediately release the motion picture button after pressing it. ••When the set operating time has elapsed, recording automatically ends. ••Zoom operation is not available.
Recording motion pictures Taking still pictures while a motion picture is being recorded Recording mode: 1 Press the shutter button fully during the motion picture recording ••Up to 30 pictures can be recorded. ••When you take a still picture, the simultaneous still/motion picture recording icon is displayed. ••Recording with the Touch Shutter function (→63) is also available. ●●The aspect ratio of a still picture is fixed to [16:9]. ●●Takes a still picture using [Picture Size] [S] (2M).
Recording motion pictures Recording Snap Movies Recording mode: You can specify the recording time in advance and record motion pictures casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. ••Motion pictures will be recorded with [FHD/20M/30p] in [MP4]. ••Using the smartphone/tablet app “Panasonic Image App”, you can combine motion pictures recorded with the camera.
Recording motion pictures Recording Snap Movies 7 Press the motion picture button to start recording Elapsed recording time ••Immediately release the motion picture button after pressing it. ••You cannot stop motion picture recording in the middle. The recording will stop automatically when the set recording time has elapsed. Set recording time ■■Deactivating Snap Movie Select [OFF] in step 2.
Recording motion pictures Recording Snap Movies Setting up [Pull Focus] Set the frames that determine a focus start (first) position and focus end (second) position. The camera then measures its distance to the subjects and sets focus. When you start motion picture recording, focus shifts from the first frame to the second frame. Touch operation Touch a subject (first position), drag your finger to the desired location (second position), and release the finger.
Recording motion pictures Using the [Motion Picture] menu For the setting procedures for the [Motion Picture] menu, refer to (→65) ••The [Motion Picture] menu is not displayed in the recording mode in which motion pictures cannot be recorded. [4K Live Cropping] ••For details (→258). [Snap Movie] ••For details (→262). [Rec Format] ••For details (→255). [Rec Quality] ••For details (→255). [Exposure Mode] ••For details (→124). [High Speed Video] ••For details (→125).
Recording motion pictures Using the [Motion Picture] menu For the setting procedures for the [Motion Picture] menu, refer to (→65) [Continuous AF] ••For details (→257). [Level Shot] Recording mode: Level Shot function automatically detects the camera’s tilt while recording motion pictures, and horizontally corrects the recording motion picture so it will not be tilted.
Recording motion pictures Using the [Motion Picture] menu For the setting procedures for the [Motion Picture] menu, refer to (→65) [Wind Noise Canceller] Recording mode: This will reduce the wind noise coming into the built-in microphone while maintaining sound quality. Settings: [HIGH] / [STANDARD] / [OFF] ••[HIGH] effectively reduces the wind noise by minimizing the low-pitched sound when a strong wind is detected.
Playing Back and Editing Pictures Viewing your pictures 1 2 Press the Playback button ZS100 Press to select a picture to be displayed ••When you press and hold , the pictures are displayed one after another. •• ZS100 Pictures can also be forwarded or rewound by rotating the rear dial or dragging the screen horizontally (→61). •• ZS60 Pictures can also be forwarded or rewound by rotating the control dial or dragging the screen horizontally (→61).
Playing Back and Editing Pictures Viewing your pictures ■■Ending Playback Press the Playback button again or press the Motion picture button. The Playback can also be ended by pressing the shutter button halfway. ●● ZS100 ●● ZS60 The playback screen appears if the camera is turned on while pressing the Playback button. By holding down the Playback button while the camera is off, you can turn the camera on in playback mode.
Playing Back and Editing Pictures Viewing motion pictures This unit was designed to play motion pictures using the AVCHD and MP4 formats. ••Motion pictures are displayed with the motion picture icon ([ ]). ••4K burst files recorded with the 4K Photo function are displayed with [ ]. To select and save a picture from 4K burst files, refer to (→190). ••The [Post Focus] icon ([ ]) is shown on images recorded using [Post Focus]. To save pictures with a selected focus point, refer to (→214).
Playing Back and Editing Pictures Viewing motion pictures ■■Operations during automatic Snap Movie playback Playback from the beginning Returning to the previous picture Scrolling to the next picture ••If you touch the screen, automatic playback will stop. ●●Motion pictures recorded with other devices can be played back on this camera but cannot be edited with it. ●●Motion pictures recorded with this camera cannot be played back on other devices.
Playing Back and Editing Pictures Switching the Playback Method Zooming in and viewing “Playback Zoom” 1 Move the zoom lever toward T side •• Each time you move the zoom lever toward the T side, the magnification increases through four levels: 1x, 2x, 4x, 8x, and 16x. (The picture quality displayed becomes successively lower.) •• To reduce zoom → Move the zoom lever toward W side. •• You can also enlarge/reduce the image by pinching out/pinching in (→61) on the part you want to enlarge/reduce.
Playing Back and Editing Pictures Switching the Playback Method Viewing a list of pictures “Multi Playback” 1 Move the zoom lever toward W side •• Move the zoom lever toward the W side and you can switch the display methods in the following order: 1-picture screen (fullscreen) → 12-picture screen → 30-picture screen → Calendar screen. (Move the lever to the T side to return.) •• It is possible to switch the playback screen by touching the following icons.
Playing Back and Editing Pictures Switching the Playback Method Viewing pictures by their recording date “Calendar Playback” 1 Move the zoom lever toward the W side to display the calendar screen ZS100 ZS60 2 Use to select recording date and press [MENU/SET] •• Pictures are displayed in a 12-picture screen. •• Turn the zoom lever toward the W side to return to the Calendar screen display.
Playing Back and Editing Pictures Switching the Playback Method Viewing group pictures You can consecutively play back multiple pictures in a group or play back group pictures one by one. [ ]: Group pictures recorded consecutively by setting the burst speed to [SH] (→202) ]: Group pictures recorded using [Time Lapse Shot] (→216) ]: Group pictures recorded using [Stop Motion Animation] (→219) [ [ 15 pic. ••You can delete or edit pictures in group units.
Playing Back and Editing Pictures Switching the Playback Method Playing back group pictures one by one 1 Press 2 Use to select [Display In Group] and press [MENU/SET] Use to scroll through the pictures 3 276 •• The same operation can be performed by touching [ ]. •• Pressing again or touching [ ] and selecting [Exit Display In Group] will return you to the normal playback screen. •• You can use the same operations for pictures stored in a group as in normal still picture playback.
Playing Back and Editing Pictures Deleting pictures Deleted pictures cannot be recovered. Pictures will not be deleted in the following cases: ••Protected pictures. ••Card switch is in “LOCK” position. ••Pictures that are not based on the DCF standard. (→269) ●●Do not turn off the camera while deleting. ●●Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional).
Playing Back and Editing Pictures Deleting pictures To delete multiple (up to 100)/To delete all pictures A picture group (→275) is handled as 1 picture. (All the pictures in the selected picture group are deleted.
Playing Back and Editing Pictures Using the [Playback] menu You can specify picture protection, resizing, print settings, and other settings for pictures you have taken. ••For the setting procedures of the menu. (→65) ●●In the following cases, new pictures are created after they have been edited. Before starting to edit, make sure that there is enough free space in the memory card.
Playing Back and Editing Pictures Using the [Playback] menu [Slide Show] Automatically play pictures in order. You can also put together a slide show composed of only still pictures, only motion pictures, or only 4K Photos, etc. Recommended when viewing on TV screen.
Playing Back and Editing Pictures Using the [Playback] menu ■■To change settings such as music or display time Select [Effect] or [Setup] and press [MENU/SET]. [Effect] [AUTO] / [NATURAL] / [SLOW] / [SWING] / [URBAN] / [OFF] [Setup] [Duration] [5SEC] / [3SEC] / [2SEC] / [1SEC] [Repeat] [ON] / [OFF] [Sound] [AUTO]: W ith still pictures, music will play back, and with motion pictures, audio will play back. [Music]: Music effect will play back. [Audio]: Audio is played back from motion pictures.
Playing Back and Editing Pictures Using the [Playback] menu When selecting [Category Play] in step 2 (→281) 3 Use to select the category and press [MENU/SET] •• The available categories are as follows. [Face Recog.
Playing Back and Editing Pictures Using the [Playback] menu [Location Logging] After you send location information (latitude and longitude) obtained by your smartphone/ tablet to this unit, you can write this information on pictures using the unit. Preparation Send location information to this unit from your smartphone/tablet. (→314) •• You must install “Panasonic Image App” on your smartphone/tablet.
Playing Back and Editing Pictures Using the [Playback] menu [RAW Processing] ZS100 You can use the camera to develop still pictures that were recorded in RAW format. The created still pictures are saved in JPEG format. 1 Set the menu → 2 3 [Playback] → [RAW Processing] Press to select RAW file and press [MENU/SET] Press to select the item •• The following items can be set. The settings used during recording are applied at the time of setting.
Playing Back and Editing Pictures Using the [Playback] menu 5 Press [MENU/SET] 6 Press •• The screen in step 3 reappears. To set another item, repeat steps 3 to 5. to select [Begin Processing] and press [MENU/SET] ■■Setting each item When you select an item, the setting screen appears. Operation Touch operation Drag Description Used to make adjustments Set [WB K Set] Used to display the color temperature setting screen (→136) (Only when [White Balance] is set ]) to [ [Adjust.
Playing Back and Editing Pictures Using the [Playback] menu When [Setup] is selected When you select an item, the screen for selecting [Reinstate Adjustments], [Color Space], or [Picture Size] is displayed. Use to select the item and press [MENU/SET] •• When [Reinstate Adjustments] is selected, confirmation screen is displayed. When you select [Yes], the item selection screen reappears.
Playing Back and Editing Pictures Using the [Playback] menu [Light Composition] Select multiple frames from 4K burst files recorded in 4K Photo mode (→184) that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture.
Playing Back and Editing Pictures Using the [Playback] menu ■■When [Range Merging] is selected Select the first and last frames, and the brighter parts of frames within that range will be superimposed. Select the frame of the first picture The selection method is the same as in step Press [MENU/SET] when selecting [Composite Merging]. The position of the first picture will be remembered. Select the frame of the last picture Press [MENU/SET] The position of the last picture will be remembered.
Playing Back and Editing Pictures Using the [Playback] menu [Clear Retouch] You can erase unnecessary parts recorded on the pictures taken. ••The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. 1 Set the menu → 2 3 Use [Playback] → [Clear Retouch] to select a still picture and press [MENU/SET] Drag your finger over the part you want to erase •• The parts to be erased are colored.
Playing Back and Editing Pictures Using the [Playback] menu [Title Edit] You can enter characters (titles etc.) on a recorded picture. After text has been registered, it can be stamped in prints using [Text Stamp] (→291). 1 Set the menu → [Playback] → [Title Edit] → [Single] or [Multi] 2 Select a still picture (→279) 3 Enter characters (Entering text (→87)) •• [ ] is displayed for pictures with texts already stamped. •• To delete texts, delete all the characters in the character input screen.
Playing Back and Editing Pictures Using the [Playback] menu [Text Stamp] You can stamp the recording date and time, names, travel destination, travel dates, etc. on the recorded still pictures. 1 Set the menu → [Playback] → [Text Stamp] → [Single] or [Multi] 2 Select a still picture (→279) 3 4 5 •• [ ] appears on screen if the picture is stamped with text.
Playing Back and Editing Pictures Using the [Playback] menu [Video Divide] A single motion picture can be split into 2 parts. This is convenient when you want to keep just the necessary scenes, or if you wish to delete unnecessary scenes to increase free space on your card, such as when traveling.
Playing Back and Editing Pictures Using the [Playback] menu [Time Lapse Video] You can create a motion picture from the pictures in a group that was recorded using [Time Lapse Shot]. The motion picture you created is saved in the MP4 recording format. 1 Set the menu → 2 3 [Playback] → [Time Lapse Video] Use to select the [Time Lapse Shot] picture group and press [MENU/SET] Create a motion picture after selecting a production method •• For details, refer to step 5 and the subsequent steps (→217).
Playing Back and Editing Pictures Using the [Playback] menu [Resize] Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc.
Playing Back and Editing Pictures Using the [Playback] menu [Cropping] Enlarge your still pictures and crop unwanted areas. 1 Set the menu → 2 3 Use [Playback] → [Cropping] to select a still picture and press [MENU/SET] Select area to crop and press [MENU/SET] •• You can also touch [ ]/[ ] to enlarge/reduce. •• You can also move by dragging on the screen. ZS100 Enlarge Change position ZS60 Enlarge Change position ●●Perform cropping for each picture in the group.
Playing Back and Editing Pictures Using the [Playback] menu [Rotate] / [Rotate Disp.] You can automatically display a still picture recorded in portrait orientation by taking the picture with the camera held vertically, or manually rotate the picture in 90-degree units. [Rotate] Rotating a picture manually ••You cannot select [Rotate] when [Rotate Disp.] is set to [OFF].
Playing Back and Editing Pictures Using the [Playback] menu [Favorite] By labeling your favorite pictures with a star [ ], you can play back your favorite pictures only, or you can delete all pictures except your favorites. 1 Set the menu → 2 [Playback] → [Favorite] → [Single] or [Multi] Select picture (→279) ■■To clear all In step 1, select [Favorite] → [Cancel] → [Yes], and then press [MENU/SET] ●●Up to 999 pictures can be set.
Playing Back and Editing Pictures Using the [Playback] menu [Print Set] Picture/picture no./date printing settings can be made for when printing with DPOF print-compatible shops or printers. (Contact the local photo printing store or read operating instructions of the printer to check if DPOF is supported.) For more information visit: http://panasonic.jp/dc/dpof_110/white_e.
Playing Back and Editing Pictures Using the [Playback] menu [Protect] Set protection to disable picture deletion. Prevents deletion of important pictures. 1 Set the menu → 2 [Playback] → [Protect] → [Single] or [Multi] Select picture (→279) ■■To clear all In step 1, select [Protect] → [Cancel] → [Yes], and then press [MENU/SET] When you set the write-protect switch on the card to the “LOCK” position, the picture is not erased. ●●The picture is erased when formatting, even if it is protected.
Playing Back and Editing Pictures Using the [Playback] menu [Picture Sort] You can set the display sequence used for playing back pictures on this unit. 1 Set the menu → 2 Use [Playback] → [Picture Sort] to select the item and press [MENU/SET] [FILE NAME] [DATE/TIME] Displays pictures in the folder name or file name sequence. This display format allows you to find the storage location of a picture on a card more easily.
Wi-Fi What you can do with the Wi-Fi® function Operating the camera by connecting it to a smartphone/tablet (→305) Taking pictures via a smartphone (remote recording) Playing back pictures in the camera on a smartphone Saving pictures in the camera to a smartphone Sending pictures in the camera to social networking services Writing the location information on pictures in the camera Combining motion pictures recorded with Snap Movie according to your preference on a smartphone Connect easily You can easily
Wi-Fi Wi-Fi Function ■■Before Use ••Complete the date and time settings in advance. (→42) ••To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped with the wireless LAN function is required.
Wi-Fi Wi-Fi Function ••Before a Wi-Fi connection is established, press the [Wi-Fi] button to perform the following operations: –– The information (SSID) required for directly connecting your smartphone to this unit is displayed. –– You can select the following items by pressing [DISP.] button. [New Connection] [Select a destination from History] (→342) [Select a destination from Favorite] (→342) SSID ••You can also display the same menu by selecting → [Setup] → [Wi-Fi] → [Wi-Fi Function].
Wi-Fi Wi-Fi Function ■■Describing method When “select [Select a destination from History]”, etc. is described in a step, perform any of the following operations. With cursor button operations Use cursor button to select [Select a destination from History] and press [MENU/SET]. With touch screen operations Touch [Select a destination from History]. ●●Do not remove the memory card or battery or move to an area without any reception while sending images.
Wi-Fi Operating the camera by connecting it to a smartphone You can remotely operate the camera using a smartphone. The “Panasonic Image App” (hereafter “Image App”) must be installed on your smartphone. Installing the smartphone/tablet app “Panasonic Image App” For Android™ apps Supported OS Installation procedure Android 4.
Wi-Fi Operating the camera by connecting it to a smartphone Connecting to a smartphone You can easily establish a Wi-Fi connection on this unit without entering a password on your smartphone. Preparation (On the camera) Set [Wi-Fi Password] to [OFF]. (→344) (On your smartphone) Install “Image App” in advance. (→305) [Wi-Fi Password] is set to [OFF] at the time of purchase. In [OFF] state, a third party can tap into the Wi-Fi transmission and steal transmitted data.
Wi-Fi Operating the camera by connecting it to a smartphone ■■Using an iOS device Turn on the Wi-Fi function in the setting menu of the smartphone Select the SSID displayed on the screen of this unit Return to the home screen and start “Image App” (→305) •• When the connection confirmation screen appears on this unit, select [Yes] and press [MENU/SET]. (Only when making a connection for the first time.
Wi-Fi Operating the camera by connecting it to a smartphone Using a password to set up a connection When [Wi-Fi Password] is set to [ON], you can strengthen security by using manual input or a QR code for password authentication. Preparation (On the camera) Set [Wi-Fi Password] to [ON]. (→344) (On your smartphone) Install “Image App” in advance.
Wi-Fi Operating the camera by connecting it to a smartphone ■■Using an iOS device ••When reading a QR Code to connect (Steps to are not necessary when reconnecting.) Start “Image App” (→305) Select [ ] → [OK] Read the QR Code displayed on this unit with “Image App” (When you press [MENU/SET] on the camera, the QR code is displayed in an enlarged size.) •• When the smartphone is connected to a wireless access point, it may take time to display QR code.
Wi-Fi Operating the camera by connecting it to a smartphone ■■Using an Android device ••When reading a QR Code to connect Start “Image App” (→305) Select [ ] Read the QR Code displayed on this unit with “Image App” (When you press [MENU/SET] on the camera, the QR code is displayed in an enlarged size.) •• When the smartphone is connected to a wireless access point, it may take time to display QR code.
Wi-Fi Operating the camera by connecting it to a smartphone ■■When connecting with [Direct] (On the camera) Select [Direct] and press [MENU/SET] •• Select [Wi-Fi Direct] or [WPS Connection]*, and connect the camera to the smartphone by following the connection method (→341). * WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices.
Wi-Fi Operating the camera by connecting it to a smartphone Taking pictures via a smartphone (remote recording) 1 2 Connect to a smartphone (→306) Operate the smartphone Select [ ] Take pictures •• The recorded images are saved in the camera. •• Some settings are not available. ●●When using zoom, the camera could tilt when the lens barrel extends. Make sure to secure the camera in place with a tripod or by other means.
Wi-Fi Operating the camera by connecting it to a smartphone Playing back pictures in the camera on a smartphone 1 2 Connect to a smartphone (→306) Operate the smartphone Select [ ] •• You can switch a device of pictures to be displayed using the icon at the top left on the screen. Select [LUMIX] to display a picture saved in the camera. •• When the picture is touched, it is played back at a larger size.
Wi-Fi Operating the camera by connecting it to a smartphone Sending pictures in the camera to social networking services 1 2 Connect to a smartphone (→306) Operate the smartphone Select [ ] •• You can switch a device of pictures to be displayed using the icon at the top left on the screen. Select [LUMIX] to display a picture saved in the camera. Switch the device of the pictures to be displayed Press and hold the picture and drag it to send it to the social networking service, etc.
Wi-Fi Operating the camera by connecting it to a smartphone ■■Recording location information and taking pictures Start recording the location information on your smartphone Start “Image App” (→305) Select [ ] Select [ Select [ ] Start geotagging] Take pictures using the camera End recording of the location information on your smartphone Select [ Stop geotagging] to end recording of location information ■■Writing location information to a picture Preparation (On the camera) Connect to a smartphone.
Wi-Fi Operating the camera by connecting it to a smartphone Combining motion pictures recorded with Snap Movie according to your preference on a smartphone Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap Movie] function (→262). Music can be added to motion pictures to be combined. In addition, you can save the combined motion picture or upload it on a web service.
Wi-Fi Operating the camera by connecting it to a smartphone ■■Combining motion pictures by operating a smartphone Connect to a smartphone (→306) Operate the smartphone Select [ ] Select [ ] •• [Snap Movie] motion pictures with recent recording dates will be selected and automatically sent to the smartphone. •• When motion pictures with recent recording dates are not available, a screen that lets you select motion pictures will be displayed. Select motion pictures and send them.
Wi-Fi Displaying still pictures on a TV You can display still pictures on a TV that is compatible with a DLNA certified digital media renderer (DMR) function. Preparation Set the TV to DLNA waiting Mode. •• Read the operating instructions for your TV.
Wi-Fi Sending pictures When sending pictures, first select [New Connection], then select the method of sending pictures. After you have completed connecting, you can also change the sending settings, such as the size of pictures to be sent. ■■Images that can be sent Destination JPEG RAW MP4*1 AVCHD*1, *2 4K Burst File*1 Pictures recorded in [Post Focus]*1 [Smartphone] (→322) ○ – ○*3 – – [PC] (→325) ○ ○ ○ ○ ○ [Cloud Sync.
Wi-Fi Sending pictures ●●Since the camera gives priority to recording, sending may take longer during the recording. ●●If you turn off the camera before you have completed sending, or if you close the Wi-Fi connection, or in similar situations, unsent files will not be resent. ●●You may not be able to delete files or use the [Playback] menu while sending. ●●Motion pictures, 4K burst files recorded with the 4K Photo function, and pictures recorded in [Post Focus] cannot be sent.
Wi-Fi Sending pictures Changing the settings for sending images After you have completed connecting, you can change the sending settings, such as the size of pictures to be sent, by pressing the [DISP.] button. Item [Size] Description Resize the image to send. [Original] / [Auto]*1 / [Change] •• If you select [Auto], the image size is determined by the circumstances at the destination. •• You can select the image size for [Change] from [M], [S], or [VGA]. The aspect ratio does not change.
Wi-Fi Sending pictures to a smartphone Preparation Install “Image App” in advance.
Wi-Fi Wireless printing You can print out recorded still pictures wirelessly from a PictBridge (wireless LAN-compatible)* printer. * Compliant with the DPS over IP standards. Contact the printer manufacturers for details on PictBridge (wireless LAN-compatible) printers.
Wi-Fi Sending pictures to AV device Still pictures and motion pictures can be sent to AV devices in the home (home AV devices), such as DLNA compatible recorders. Home AV device Wireless access point Preparations When sending a picture to AV devices, set your device to DLNA waiting Mode. •• Read the operating instructions of your device for details.
Wi-Fi Sending pictures to a PC Still pictures and motion pictures recorded by the camera can be sent to a PC. Preparations •• Turn the computer on. •• Prepare folders for receiving images on the PC before sending a picture to the PC (below). •• If the standard settings are changed for the workgroup on the connected PC, you must change settings in [PC Connection] on this unit.
Wi-Fi Sending pictures to a PC Sending pictures to a PC 1 Set the menu 2 3 Select [Via Network] or [Direct] to connect (→338, 341) 4 5 Select the folder you want to send to → [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection] → [Send Images While Recording] / [Send Images Stored in the Camera] → [PC] Select the PC you want to connect to •• If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer name (for Mac, enter the NetBIOS name).
Wi-Fi Using WEB services Through “LUMIX CLUB”, you can send still pictures and motion pictures to social networking services, etc. By selecting the setting to automatically transfer still pictures and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures and motion pictures on a PC or a smartphone.
Wi-Fi Using WEB services Registering the WEB service to “LUMIX CLUB” Check the “FAQ/Contact us” on the following site for compatible WEB services. http://lumixclub.panasonic.net/eng/c/lumix_faqs/ Preparation Make sure that you have created an account on the WEB service you want to use, and have the login information available. 1 Connect to the “LUMIX CLUB” site using a smartphone or computer 2 3 Enter your “LUMIX CLUB” login ID and password and log in to the service 4 328 http://lumixclub.
Wi-Fi Using WEB services Sending pictures 1 Set the menu 2 3 4 Select [Via Network] and connect (→338) → [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection] → [Send Images While Recording] / [Send Images Stored in the Camera] → [Web service] Select a WEB service you want to connect Check the send settings, and select [Set] •• To change the send setting, press the [DISP.] button.
Wi-Fi Using WEB services ■■Quickly sending pictures in the camera to WEB services Once you send a picture, you can send pictures to the WEB service as quickly and easily as using a smartphone, only when the environment for connecting to a wireless access point is available. (The instructions below assume that you are already registered to “LUMIX CLUB” and the camera has a record of a connection to a wireless access point.) Display the picture •• When pictures are displayed as a group, they are all sent.
Wi-Fi Using WEB services When sending images to [Cloud Sync. Service] Preparation You need to register to “LUMIX CLUB” (→332) and configure the Cloud Sync. setting to send a picture to a Cloud Folder. Use “PHOTOfunSTUDIO” (→353) on a PC or “Image App” on a smartphone to configure the Cloud Sync. settings. ■■About the images sent to a Cloud Folder by the use of [Cloud Sync. Service] (Current as of January 2016) ••If you set the picture destination to [Cloud Sync.
Wi-Fi Using “LUMIX CLUB” About the [LUMIX CLUB] Acquire a “LUMIX CLUB” login ID (free). If you register this unit to the “LUMIX CLUB”, you can synchronize images between the devices you are using, or transfer these images to WEB services. Use the “LUMIX CLUB” when uploading pictures to WEB services. ••You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (→335) Refer to the “LUMIX CLUB” site for details. http://lumixclub.panasonic.
Wi-Fi Using “LUMIX CLUB” Acquiring a new login ID ([New account]) 1 Set the menu 2 3 Select [Set/Add Account] 4 Select the method for connecting to a wireless access point, and set 5 Read through the “LUMIX CLUB” terms of use and select [Agree] 6 Enter the password 7 Check the login ID and select [OK] 333 → [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB] Select [New account] •• Connect to the network. Proceed to the next page by selecting [Next].
Wi-Fi Using “LUMIX CLUB” Using a previously acquired login ID/confirming and changing login ID and password ([Set Login ID]) Preparation To use a previously acquired login ID, confirm your ID and password. To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” website from your smartphone or PC and change the “LUMIX CLUB” password in advance.
Wi-Fi Using “LUMIX CLUB” To set the same login ID for the camera and the smartphone ••Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or WEB services.
Wi-Fi Using “LUMIX CLUB” Delete your login ID and account from the “LUMIX CLUB” Delete the login ID from the camera when transferring it to another party or disposing of it. You can also delete your “LUMIX CLUB” account. ••Changes and other actions to login IDs can only be made to the login ID acquired with the camera.
Wi-Fi About connections If you have selected [New Connection], select the Wi-Fi function and sending destination, and then select the connection method. If you are connecting with the same settings as used previously, you can quickly start using the Wi-Fi function by connecting with [Select a destination from History] or [Select a destination from Favorite]. This section describes connection methods. ••When connecting with the same settings as used previously, refer to (→342).
Wi-Fi About connections Connecting via a wireless access point ([Via Network]) Select a connection method to the wireless access point. ••WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the instruction manual of the wireless access point.
Wi-Fi About connections If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. ••Confirm encryption key of the selected wireless access point if the network authentication is encrypted. ••When connecting by [Manual Input], confirm SSID, network authentication type, encryption type, encryption key of the wireless access point you are using. 1 Select the wireless access point you are connecting to •• Pressing [DISP.
Wi-Fi About connections ■■When connecting with [Manual Input] On the screen of step 1 of “If you are not sure about the WPS compatibility (connecting by [From List])”, select [Manual Input] (→339) Enter the SSID of the wireless access point you are connecting to, then select [Set] •• For details on how to enter characters, refer to “Entering Text” (→87). Select the network authentication type •• For information on network authentication, see the instruction manual of the wireless access point.
Wi-Fi About connections Connecting directly ([Direct]) Select a connection method with which your equipment is compatible. ••Read the operating instructions of your device for details.
Wi-Fi About connections Connecting quickly with the same settings as used previously ([Select a destination from History] / [Select a destination from Favorite]) The camera keeps a History of times you used the Wi-Fi function. You can register items in the History to Favorite. You can easily connect with the same settings as used previously by connecting from History or Favorite. ••If the Wi-Fi settings of the device to connect to have been changed, it may not be possible to connect to the device.
Wi-Fi About connections Editing items registered in Favorite 1 Set the menu 2 3 Select the Favorite item you wish to edit and press → [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Select a destination from Favorite] Select item Item Description [Remove from Favorite] Cancels Favorites setting. [Change the Order in Favorite] Select the destination. [Change the Registered Name] •• For details on how to enter characters, refer to “Entering Text” (→87). •• Up to 30 characters can be entered.
Wi-Fi [Wi-Fi Setup] Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi. 1 Set the menu → [Setup] → [Wi-Fi] → [Wi-Fi Setup] → Desired setting Item Description [Wi-Fi Password] You can improve security by enabling password entry for a direct connection to a smartphone. [ON]: Connects the camera and a smartphone using an SSID and password. (→308) [OFF]: Connects the camera and a smartphone using an SSID.
Wi-Fi [Wi-Fi Setup] Item Description [Wi-Fi Function Lock] To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Cancel] [Network Address] Displays the MAC address and IP address of this unit.
Connecting with other devices Enjoying 4K motion pictures Viewing 4K motion pictures ■■Viewing on TV screen When you connect this unit to a 4K-compatible TV and play back a motion picture recorded with [Rec Quality] of [4K], you can enjoy high-resolution 4K motion pictures. Although resolution output will be lower, you can also play back 4K motion pictures by connecting to a high-definition TV and other devices that do not have 4K support. Preparations •• Set [HDMI Mode (Play)] (→82) to [AUTO] or [4K].
Connecting with other devices Enjoying 4K motion pictures Storing 4K motion pictures ■■Storing 4K motion pictures on your PC For details (→352). ■■Storing 4K motion pictures on a DVD You cannot transfer or copy motion pictures recorded in [Rec Quality] with [4K] to a Blu‑ray disc or DVD using a Panasonic recorder. (Current as of January 2016) You can use the software “PHOTOfunSTUDIO” (→353) to convert the file size of a motion picture to a smaller size or copy it to a DVD.
Connecting with other devices Viewing on TV screen You can view pictures on a TV screen by connecting your camera to your TV with the HDMI micro cable. Preparation Turn off both camera and TV. 1 Connect camera to TV Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction, the plug could become deformed and cause faulty operation) Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
Connecting with other devices Viewing on TV screen ●●Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect ratio setting. ●●Change the screen mode on your TV if the picture is displayed with the top or bottom cut off. ●●When pictures are displayed, they may not be displayed properly depending on the type of TV. ●●Pictures rotated to portrait may be blurred slightly. ●●Check the [HDMI Mode (Play)].
Connecting with other devices Viewing on TV screen VIERA Link (HDMI) (HDAVI Control™) What is VIERA Link (HDMI)? ●●VIERA Link is a function that automatically links this camera to VIERA Linkcompatible devices by connecting HDMI micro cables for enabling easy operation with the VIERA remote control. (Some operations are not available.) ●●VIERA Link (HDMI) is an exclusive Panasonic function added to the industrystandard HDMI control functions known as HDMI CEC (Consumer Electronics Control).
Connecting with other devices Viewing on TV screen ■■Other related operations Turning the unit OFF ••The camera can also be turned off when the television is turned off with the remote control. Automatic input select ••When the camera and TV are connected by HDMI micro cable, the camera is turned ON, and the camera’s Playback button is pressed, the television input automatically switches to the camera’s screen.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC Still/motion pictures can be copied from the camera to your computer by connecting the two together. ••Some computers can read directly from the camera’s memory card. For details, see the instruction manual for your computer. ••If your computer does not support SDXC Memory Cards, a message will be displayed requesting you to format the card. (Do not format the card. This will erase recorded pictures.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC Downloading software If you wish to play back or edit pictures on a PC, download software from the supplier’s website and install it on your PC. PHOTOfunSTUDIO 9.8 PE You can capture still pictures or motion pictures to your PC, or organize captured pictures by categorizing by recording date, model name of the digital camera used to record, etc.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC SILKYPIX Developer Studio SE This software develops and edits RAW file pictures. Edited pictures can be saved in a file format such as JPEG or TIFF that can be displayed on a PC, etc. Check the website below to download/install the software. http://www.isl.co.jp/SILKYPIX/english/p/ ••Operating environment Supported OS Windows® 10 Windows® 8.1 Windows® 8 Windows® 7 Mac® OS X v10.6 - v10.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC Copying still pictures and motion pictures Preparations •• Install “PHOTOfunSTUDIO” on your computer before starting the copying procedure. (→353) •• Turn on the camera and computer. 1 Connect camera to computer •• Check the plug direction and insert it straight in.
Connecting with other devices Storing recorded still pictures and motion pictures on your PC ■■For PTP mode The camera can be connected to your computer even if [USB Mode] (→82) is set to [PictBridge(PTP)]. ••Data can be read only from the card in the PC. ••It may not be possible to import if there are 1,000 or more pictures on the card. ••Motion pictures cannot be played back in the PTP mode.
Connecting with other devices Storing recorded still pictures and motion pictures in the recorder Copying by inserting the card into the recorder You can copy pictures using Panasonic equipment (such as Blu-ray disc recorders) with support for each file format. ••The method of importing still pictures and motion pictures recorded in this unit to other devices will vary depending on the file format (JPEG, RAW, AVCHD, or MP4).
Connecting with other devices Printing You can connect directly to a PictBridge-compatible printer for printing. Preparations •• Adjust the print quality or other settings on your printer, as needed. •• Turn on the camera and printer. 1 Connect camera to printer •• Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction, the plug could become deformed and cause faulty operation) Also, do not insert into the wrong socket.
Connecting with other devices Printing Printing multiple pictures Multiple pictures are printed at one time. 1 2 3 Press Use to select [Multi Print] in step 3 of “Printing” (→358) to select the item and press [MENU/SET] •• [Multi Select]: •• [Select All]: •• [Print Set (DPOF)]: •• [Favorite]: Use Scroll between pictures with , select pictures to print with [MENU/SET] (Press [MENU/SET] again to release selection.) Use to select [OK], and press [MENU/SET] Print all pictures.
Connecting with other devices Printing Printing with date and text Time and date can be set to be printed on the picture when taking the picture by activating the [Text Stamp] function in the [Playback] menu. (→291) ■■Printing date without [Text Stamp] Printing in store: Only recording date can be printed. Request date printing in store.
Connecting with other devices Printing Making print settings on the camera Setting options include the number of printed pictures and their size. Make settings before selecting [Print start]. to select the item and press [MENU/SET] 1 Use Item 2 Settings [Print with Date] [ON] / [OFF] [Num.of prints] Set number of pictures (up to 999 pictures) [Paper Size] When [ [Page Layout] [ [ Use ] is selected, the printer settings take priority.
Others Optional accessories Using the AC adaptor (optional) and DC coupler (optional) instead of the battery By using the AC adaptor (optional) and DC coupler (optional), you can record and play back without worrying about the remaining battery charge. The optional DC coupler can only be used with the designated Panasonic AC adaptor (optional). ●●Always use a genuine Panasonic AC adaptor (optional). ●●Also read the AC adaptor and DC coupler operating instructions.
Others List of monitor/viewfinder displays ZS100 ••The following images are examples of when the display screen is set to [ ] (monitor style) in the monitor. ••The information displayed, such as histograms, magnifications, and numeric values, are only for the purpose of reference.
Others ZS100 List of monitor/viewfinder displays 120fps [Quality] (→140) AF area (→146, 156, 161) [High Speed Video] (→125) Spot metering target (→183) [Self Timer]*4 (→208) [Post Focus] (→210) [AFS/AFF/AFC] (→148)/ AFS AFF AFC MF MF (→167) [Silent Mode] (→225) AEL [Metering Mode] (→64, 183) AF Mode (→149) [Pull Focus] (→264) [Face Recog.] (→226) AFL AE Lock (→173) AF Lock (→173) Burst (→202) [4K PHOTO] (→184) [Auto Bracket] (→206) [Self Timer] (→208) Program Shift (→97) 2.
Others ZS100 List of monitor/viewfinder displays [Dial Guide] (→52) Touch tab (→61) White Balance Bracket (→138) Touch zoom (→240) White Balance Fine Adjustment (→137) Touch Shutter (→63) [Touch AE] (→64) White Balance (→134) [Peaking] (→172) Coloring (→94) 98 RXXmXXs Number of recordable pictures*5 (→39) Function buttons (→71) Available recording time*1, *5 (→40) Coloring (→94) Defocus control function (→93, 121) Brightness (exposure) (→94, 121) Type of defocus ([Miniature Effect]) (→122) [On
Others ZS100 List of monitor/viewfinder displays In playback 15 pic.
Others ZS100 List of monitor/viewfinder displays Clear Retouch completed icon (→289) Acquiring information icon (→378) Name*2 (→228, 229) Location*2 (→77) Title*2 (→290) Playback (Motion Pictures) (→270) 1ST DAY Travel elapsed days (→77) Upload (Wi-Fi) icon (→330) Recording information*3 Submenu icon (→276, 330) [Silent Mode] (→225) 11 months 20 days Age in years/months (→228, 229) Multi Playback (→273) Delete (→277) ■■Detailed information display AM10:00 DEC. 1.
Others ZS100 List of monitor/viewfinder displays ■■Histogram display R G B Y 1/98 Histogram (→57) 100-0001 1/98 100-0001 Picture number/Total pictures Folder/File number*3 (→356) Recording information*3 *1 [h], [m] and [s] indicate “hour”, “minute” and “second”. *2 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]). *3 This is not displayed for motion pictures recorded in [AVCHD]. *4 This is not displayed for motion pictures.
Others List of monitor/viewfinder displays ZS60 ••The following images are examples of when the display screen is set to [ ] (monitor style) in the monitor. ••The information displayed, such as histograms, magnifications, and numeric values, are only for the purpose of reference.
Others ZS60 List of monitor/viewfinder displays [Quality] (→140) AF area (→146, 156, 161) 240fps 120fps [High Speed Video] (→125) Spot metering target (→183) [Self Timer]*4 (→208) [Post Focus] (→210) [AFS/AFF/AFC] (→148)/ AFS AFF AFC MF MF (→167) AF Mode (→149) [Silent Mode] (→225) AEL [Metering Mode] (→64, 183) [Pull Focus] (→264) [Face Recog.
Others ZS60 List of monitor/viewfinder displays [Dial Guide] (→52) Touch tab (→61) White Balance Bracket (→138) Touch zoom (→240) White Balance Fine Adjustment (→137) Touch Shutter (→63) [Touch AE] (→64) White Balance (→134) [Peaking] (→172) Coloring (→94) 98 RXXmXXs Number of recordable pictures*5 (→39) Function buttons (→71) Available recording time*1, *5 (→40) Coloring (→94) Defocus control function (→93, 121) Brightness (exposure) (→94, 121) Type of defocus ([Miniature Effect]) (→122) [One
Others ZS60 List of monitor/viewfinder displays In playback 15 pic.
Others ZS60 List of monitor/viewfinder displays Clear Retouch completed icon (→289) Acquiring information icon (→378) Name*2 (→228, 229) Location*2 (→77) Title*2 (→290) Playback (Motion Pictures) (→270) 1ST DAY Travel elapsed days (→77) Upload (Wi-Fi) icon (→330) Recording information*3 Submenu icon (→276, 330) [Silent Mode] (→225) 11 months 20 days Age in years/months (→228, 229) Multi Playback (→273) Delete (→277) ■■Detailed information display AM10:00 DEC. 1.
Others ZS60 List of monitor/viewfinder displays ■■Histogram display R G B Y 1/98 Histogram (→57) 100-0001 1/98 100-0001 Picture number/Total pictures Folder/File number*3 (→356) Recording information*3 *1 [h], [m] and [s] indicate “hour”, “minute” and “second”. *2 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]). *3 This is not displayed for motion pictures recorded in [AVCHD]. *4 This is not displayed for motion pictures.
Others Message displays The following explains the meaning of major messages displayed on the monitor or viewfinder, and how to respond to them. ■■Memory cards [Memory Card Error] [Format this card?] •• Save needed data on a computer or other device, and then use [Format] on the camera. (→38) •• Try with a different card. [Read Error] / [Write Error] [Please check the card] •• Check whether card has been inserted correctly (→35, 36). •• Turn off the camera and remove the card.
Others Message displays ■■Battery [This battery cannot be used] •• Use a genuine Panasonic battery. Consult the dealer or your nearest Service Center if display still remains. •• Wipe any dirt away from the battery terminal. ■■Wi-Fi function [Failed to connect wireless access point] / [Connection failed] / [No destination found] •• Check following regarding the wireless access point. –– The wireless access point information set on this unit is wrong.
Others Message displays [Connection failed] •• Check following regarding the smartphones you intend to connect. →→The smartphone does not operate. →→Change the access point to connect to in the smartphone Wi-Fi settings to this camera. →→There is no free storage space on the smartphone. [Login failed. Please check Login ID and Password.] •• Login ID or password for the “LUMIX CLUB” is not correct. Please enter it again.
Others Message displays ■■Others [This picture is protected] •• Delete the picture after canceling the protect setting (→299). [Some pictures cannot be deleted] [This picture cannot be deleted] •• Non-DCF pictures (→269) cannot be deleted. Save needed data on a computer or other device, and then use [Format] on the camera. (→38) [Cannot be set on this picture] •• [Print Set], [Title Edit], [Text Stamp], and other functions cannot be used for pictures that are not compliant with the DCF standard (→269).
Others Menu list [Rec] ••The [Photo Style], [Filter Settings], [Sensitivity], [AF Mode], [AFS/AFF/AFC], [Metering Mode], ZS100 [Highlight Shadow], [i.Dynamic], [i.Resolution], [Diffraction Compensation], [i.Zoom] and [Digital Zoom] menu items are common for both [Rec] and [Motion Picture] menus. If a setting in one menu is changed, the setting with the same name in other menu will also be changed automatically.
Others Menu list [Motion Picture] ••The [Photo Style], [Filter Settings], [Sensitivity], [AF Mode], [AFS/AFF/AFC], [Metering Mode], ZS100 [Highlight Shadow], [i.Dynamic], [i.Resolution], [Diffraction Compensation], [i.Zoom] and [Digital Zoom] menu items are common for both [Rec] and [Motion Picture] menus. If a setting in one menu is changed, the setting with the same name in other menu will also be changed automatically. For details, refer to the corresponding item of the [Rec] menu.
Others Menu list [Custom] [Cust.Set Mem.] →127 [Highlight] →57 [Silent Mode] →225 [Zebra Pattern] →230 [AF/AE Lock] →173 →175 [Monochrome Live View] →231 [AF/AE Lock Hold] →173 →175 [Constant Preview] [Shutter AF] →163 [Half Press Release] →163 [Quick AF] →163 [Eye Sensor AF] →60 ZS100 [Pinpoint AF Time] ZS100 [Pinpoint AF Display] →160 →160 ZS100 →105 [Expo.Meter] →98 [Dial Guide] →52 [LVF Disp.Style] →53 →54 [Monitor Disp.
Others Menu list [Setup] [Online Manual] →76 [Menu Resume] →84 [Clock Set] →42 [Menu Background] →84 [World Time] →76 [Menu Information] →84 [Travel Date] →77 [Language] →84 [Wi-Fi] →344 [Version Disp.] →85 [Beep] →78 [Exposure Comp. Reset] →85 [Live View Mode] →78 [Self Timer Auto Off] →85 [Monitor Display]/[Viewfinder] →79 [No.
Others Q&A Troubleshooting Try checking these items (→383 - 397) first. If the problem persists, Performing [Reset] in the [Setup] menu may resolve the issue (→86). (Note that except for some items such as [Clock Set], all settings are returned to their values at the time of purchase.) Also, see the Panasonic support site for the latest support information. http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.) ■■Battery, power The charging lamp blinks.
Others Q&A Troubleshooting ■■Recording Cannot record pictures. The shutter will not operate immediately when the shutter button is pressed. •• [4K PHOTO] is set to [ ] ([4K Pre-Burst]). ] ([4K Pre-Burst]), the camera temperature →→When [4K PHOTO] in the [Rec] menu is set to [ ], switch to [ ] ([4K Burst]) and stop the rises. In some cases, the camera may display [ recording to protect itself. Wait until the camera cools down. •• Focus is not aligned.
Others Q&A Troubleshooting Recorded pictures appear coarse, or there is interference. •• We recommend trying the following methods. →→Lower ISO sensitivity (→179). →→Take pictures in brighter locations. →→Either adjust [Noise Reduction] of [Photo Style] to a higher setting or set each item other than [Noise Reduction] to a lower setting. (→130) →→ ZS100 Set [Long Shtr NR] to [ON]. (→144) →→Change the settings of [Picture Size] (→139) and [Quality] (→140).
Others Q&A Troubleshooting Panorama picture recording stops before finishing. •• If the pan motion of the camera is too slow, the camera assumes that the operation has been aborted and stops recording. •• If the pan motion of the camera is too shaky when it is moved toward the recording direction, the camera stops recording. 4K photo recording stops before finishing.
Others Q&A Troubleshooting A noise, such as a clicking or buzzing noise, is recorded on a motion picture. Audio is recorded at low volumes. •• With recording in a quiet environment, the sound of aperture, focus and other actions may be recorded in motion pictures. This is not a malfunction. The focus operation during recording of motion pictures can be set to [OFF] in [Continuous AF] (→257). •• Use of [Silent Operation] is recommended if you are concerned about operational sounds.
Others Q&A Troubleshooting ■■Monitor/viewfinder The monitor display momentarily turns off. •• When the monitor display automatically switches between finder and monitor (→59), the action of the eye sensor causes automatic switching of the display to the finder if the finder gets close to the user’s eye or an object. The monitor/viewfinder is turned off although the camera is turned on.
Others Q&A Troubleshooting ■■Playback The picture being played back is not rotated, or is rotated in an unexpected direction, when displayed. •• When [Rotate Disp.] is set to [OFF], the picture is displayed without changing its orientation. (→296) •• You can rotate pictures with the [Rotate] function. (→296) Cannot view pictures. There are no recorded pictures. •• A card is not inserted in the camera.
Others Q&A Troubleshooting Red areas in pictures appear blackened. •• •• ZS100 When the digital red-eye correction ([ ], [ ]) is operating, red areas may be blackened. →→We recommend closing the built-in flash, setting the flash mode to [ ], or turning [Red-Eye Removal] to [OFF] before recording. (→245) ZS60 When the digital red-eye correction ([ ], [ blackened. →→We recommend setting the flash mode to [ recording.
Others Q&A Troubleshooting ■■Wi-Fi function It cannot connect to the wireless LAN. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection •• Use within the communication range of the wireless LAN network. •• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? →→Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the device.
Others Q&A Troubleshooting It takes long time every time to connect to a smartphone. •• It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone, but it is not a malfunction. This unit is not displayed in the Wi-Fi setting screen of the smartphone. •• Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone. I have forgotten the login ID or password for the “LUMIX CLUB”. •• Check the information in the login screen of “LUMIX CLUB”.
Others Q&A Troubleshooting The Wi-Fi connection is not recognizing my PC. •• By default, the Wi-Fi connection uses the default workgroup name of “WORKGROUP”. If the name of the workgroup has been changed, it will not be recognized. →→Select [PC Connection] then [Change Workgroup Name] in the [Wi-Fi Setup] to change the workgroup name to match that of your PC. (→344) Pictures cannot be transmitted to the computer.
Others Q&A Troubleshooting I cannot display or delete the images uploaded to the WEB service by this unit. •• The images uploaded to the WEB service cannot be displayed or deleted by this unit. →→Perform the task using a smartphone or a PC. Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to be repaired. •• The settings stored in the camera may be deleted depending on the type of repair. →→Always make a copy of important settings. Transmission of the image fails midway.
Others Q&A Troubleshooting ■■TV, computer, printer No image appears on TV. Image blurred or not colored. •• Not connected correctly (→348). •• The television has not been switched to auxiliary input. The display on the TV and on the camera do not match. •• Aspect ratio may be incorrect or edges may be cut off with certain televisions. Cannot play motion pictures on TV. •• Card is inserted into TV. →→Connect with HDMI micro cable and play on camera (→348). No sound is output from the camera speaker.
Others Q&A Troubleshooting Computer does not recognize card. •• Disconnect USB connection cable (supplied) and reconnect with card in place. •• If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal. Computer does not recognize card. (When using an SDXC Memory Card) •• Check whether your computer is compatible with SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.
Others Q&A Troubleshooting ■■Others The lens makes a clicking noise. •• When the camera is turned on or off, the lens is moved, or an aperture operation is performed, such a noise may be heard. This is not a malfunction. •• When the brightness changes after a zooming operation or moving the camera, the lens may make a noise while adjusting the aperture. This is not a malfunction. Zooming stops instantaneously. •• When using the Extended Optical Zoom, the zooming action will stop temporarily.
Others Usage cautions and notes When in use ●●Camera may become warm if used for long periods of time, but this is not a fault. ●●Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ••If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
Others Usage cautions and notes Caring for your camera To clean your camera, remove the battery, the DC coupler (optional) or a card, or disconnect the power plug from the outlet, and wipe with a soft, dry cloth. ●●Use a damp cloth to remove stubborn stains, before wiping with a dry cloth. ●●Do not use benzine, thinners, alcohol, or kitchen detergent, as these may damage the outer casing and finish of the camera. ●●If using a chemically-treated cloth, read the supplied instructions carefully.
Others Usage cautions and notes Lens ●●Do not press the lens with excessive force. ●●Images may appear slightly white if lens is dirty (fingerprints, etc.). Turn the camera on, hold the extracted lens barrel with your fingers, and gently wipe the lens surface with a soft, dry cloth. ●●Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it to malfunction. Also, be careful when placing the camera outside or near a window.
Others Usage cautions and notes AC adaptor (supplied) ●●Keep at least 1 m (3.3 feet) away from AM radio (may cause radio interference). ●●The AC adaptor (supplied) may generate whirring sounds when it is being used. This is not a malfunction. ●●After use, be sure to disconnect the power supply device from the electrical outlet. (A very small amount of current is consumed if it is left connected.
Others Usage cautions and notes Personal Information To protect personal information, we recommend that you set a Wi-Fi password or a Wi-Fi function lock. (→344, 345) If names or birthdays are set in [Profile Setup] or in the [Face Recog.] function, keep in mind that the camera and recorded pictures will contain personal information. Be sure to pay special attention to the privacy, likeness rights, etc.
Others Usage cautions and notes Wi-Fi function ■■Use the camera as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device.
Others Usage cautions and notes ●●SDXC Logo is a trademark of SD-3C, LLC. ●●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●●HDAVI Control™ is a trademark of Panasonic Corporation. ●●“AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ●●Manufactured under license from Dolby Laboratories.
Others Usage cautions and notes This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use.
Others Usage cautions and notes This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, and/or (3) open source software The software categorized as (3) is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
