Manualshelf

Advanced Operating Manual

ManualsBrandsPanasonic ManualsCamera & PhotoPANASONIC LUMIX ZS100 4K Point and Shoot Camera, 10X LEICA DC Vario-ELMARIT F2.8-5.9 Lens with Hybrid O.I.S., 20.1 Megapixels, 1 Inch High Sensitivity Sensor, 3 Inch LCD, DMC-ZS100S (USA SILVER)
21222324252627282930
27
SQW0547
Preparations
Charging battery
ZS60
Inserting the battery
To charge the battery, insert it into the camera.
1
Slide the release lever to the
[OPEN] position and open the
card/battery door
[OPEN] [LOCK]
Release lever
2
Insert the battery all the way
• Insert the battery all the way firmly and
check that it is locked by lever.
Lever
Make sure to insert the battery in
the correct orientation.
3
Close the card/battery door
and then slide the release
lever to the [LOCK] position
■
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes off.
(Failure to wait may cause the camera to malfunction and may damage the card or recorded data.)
●
Remove battery from camera after use.
• Keep the battery in a plastic bag, making sure that it is kept away from metallic objects (such as
clips) when carrying or storing it.
●
The unusable battery should be discarded in accordance with battery recycling laws.
Call the RBRC hotline at 1-800-822-8837 for information.