Operating Instructions

105
VQT2S42
Advanced (Recording pictures)
This allows you to take pictures of a person and the background with near real-life
brightness.
∫ Technique for Night portrait mode
•
Since the shutter speed becomes slower, we recommend using a tripod and the self-timer for
taking pictures.
• When [NIGHT PORTRAIT] is selected, keep the subject still for about 1 second after taking the
picture.
Note
•
During motion picture recording, low light settings [ ] are used, which will provide
better pictures in dimly lit rooms or at nightfall.
• Noise may become visible when you take pictures in dark places.
• The shutter may remain closed after taking the picture. This is due to signal processing and is
not a malfunction.
[NIGHT PORTRAIT]
[NIGHT PORTRAIT]
Uses when taking photographs of people with night scenery as a background.
•
Open the flash. (You can set to [ ].)
• The initial setting for the AF mode is [š].
[NIGHT SCENERY]
Night scenery is vividly photographed with a slow shutter.
•
The flash setting is fixed to [Œ].
• The initial setting for the AF mode is [ ].
• When the AF mode is set to [š], it will switch to [ ].
[ILLUMINATIONS]
Illuminations are photographed beautifully.
•
The flash setting is fixed to [Œ].
• The initial setting for the AF mode is [ ].
• When the AF mode is set to [š], it will switch to [ ].
[CREATIVE NIGHT SCENERY]
The aperture value (P97) can be changed in the [NIGHT SCENERY] setting.
•
The flash setting is fixed to [Œ].
• The initial setting for the AF mode is [ ].
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 105 ページ ２０１０年４月１３日 火曜日 午後７時４０分