Operating Instructions

201
VQT2S42
Others
• Is the camera connected to the PC correctly?
• Is the camera recognised by the PC correctly?
> Set to [PC] in [USB MODE]. (P38, 173)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the
USB
connection cable
after turning off the power.
• Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB MODE]. (P38, 175)
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
• It is a sound of lens movement or aperture operation when the power is turned [ON] or [OFF],
and it is not a malfunction.
• You may hear a sound from the lens and image in the LCD monitor may suddenly change when
the brightness has changed by zoom operation or moving the camera, but there is no effect on
recording.
The sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
> Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to set
the desired language. (P40)
• This is a highlight function showing the white saturated area. (P139)
• Is the [HIGHLIGHT] set to [ON]?
• In dark places, the AF assist lamp (P141) lights red to make it easier to focus on a subject.
The picture cannot be transferred when the camera is connected to a PC.
The card is not recognised by the PC.
The card is not recognised by the PC. (SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
There is a sound from lens unit.
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is pressed halfway.
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 201 ページ ２０１０年４月１３日 火曜日 午後７時４０分