Operating Instructions

23
VQT2S42
Preparation
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimise lens flare and ghosting. The lens
hood cuts off excess lighting and improves the picture quality.
•
Check that the camera is turned off.
• Close the flash.
To attach the lens hood (flower shape) that came with the 14–42 mm/F3.5–5.6 lens
included in DMC-G2K/DMC-G2W
Insert the lens hood into the lens
with the short sides at the top and
bottom, and turn in the direction
of the arrow until it stops.
A Fitting to the mark.
To attach the lens hood that came with
the 45–200 mm/F4.0–5.6 lens included
in DMC-G2W
Insert the lens hood into the lens,
and turn in the direction of the
arrow until it stops.
B Fitting to the mark.
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 23 ページ ２０１０年４月１３日 火曜日 午後７時４０分