Operating Instructions

VQT2S42
56
Basic
∫ Example of Programme Shift
(When the 14–42 mm/F3.5–5.6 lens included in DMC-G2K/DMC-G2W is used)
Note
•
How the Exposure Compensation is switched can be changed by [EXPO. SETTINGS] (P143)
in the [CUSTOM] menu.
• If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turn red and blink.
• Programme Shift is cancelled and the camera returns to normal Programme AE mode if more
than 10 seconds pass after Programme Shift is activated. However, the Programme Shift
setting is memorised.
• Depending on the brightness of the subject, Programme Shift may not be activated.
• Programme Shift is not possible when the [SENSITIVITY] is set to [ ].
[REC] mode:
Taking Pictures with the Zoom
You can zoom-in to make people and objects appear closer or zoom-out to record
landscapes in wide angle.
To make subjects appear closer use (Tele)
Rotate the zoom ring towards Tele. (P14)
To make subjects appear further away use (Wide)
Rotate the zoom ring towards Wide. (P14)
To enlarge further, set the [EX. OPT. ZOOM] to [ON] or the [DIGITAL ZOOM] to [2k] or
[4k] in the [REC] mode menu or the [MOTION PICTURE] mode menu. Then you can take
larger photos.
When the [EX. OPT. ZOOM] (max. 2k) is used in still picture recording, set each image
aspect ratio (X/Y/W/ ) to a picture size other than [L].
(A): Aperture value
(B): Shutter speed
1 Programme Shift amount
2 Programme Shift line chart
3 Programme Shift limit
Using the Optical Zoom/Using the Extra Optical zoom (EZ)/
Using the Digital Zoom
(A)
(B)
4 2 1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
1
/
4000
15
16
17
18
19
20
(Ev)
2
2.8
4
5.6
8
11
16
22
1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 56 ページ ２０１０年４月１３日 火曜日 午後７時４０分