Operating Instructions

VQT2S42

Advanced (Recording pictures)

• Operation will be same as [ ] even if it is set to [ ] while Multi Film Bracket recording

(P96).

• Use the Quick Menu (P34) to set when in Intelligent Auto Mode.

• Self-timer cannot be set to [ ] in Intelligent Auto Mode.

• The self-timer will be disabled during recording of the motion pictures.

[REC] mode:

Setting the method used to focus (AF mode)

This allows the focusing method that suits the positions and number of the subjects to be

selected.

Also, it is possible to set the focus and exposure to the subject specified on the touch

panel.

Select the mode that matches the recording conditions and the composition.

Set the focus mode lever to [AFS] or [AFC].

Switching the auto focus mode dial.

Auto focus mode dial/

Item

Effect

š/

[ ]: Face detection

The camera automatically detects the person’s face. The

focus and exposure can then be adjusted to fit that face no

matter what portion of the picture it is in. (max. 15 areas)

[ ]: AF Tracking

Focus and exposure can be adjusted to a specified

subject. Focus and exposure will keep on following the

subject even if it moves. (Dynamic tracking)

[ ]: 23-area-focusing

Up to 23 points for each AF area can be focused. This is

effective when the subject is not in the centre of the

screen.

(AF area frame will be same as image aspect ratio setting)

Ø/

[Ø]: 1-area-focusing

The camera focuses on the subject in the AF area on the

screen.

Position and size of the AF area can be changed.

AFC

AFS

DMC-G2K&G2W&G2EB-VQT2S42_eng.book 79 ページ２０１０年４月１３日　火曜日　午後７時４０分