Operating Instructions

VQT2S42
82
Advanced (Recording pictures)
∫ When operating the touch panel
1 Touch the subject.
•
The AF area turns yellow and the subject is locked.
It will continuously adjust the focus and exposure automatically
following the movement of the subject. (Dynamic tracking)
• Lock is cancelled when [CANCEL] is touched.
2 Press the shutter button halfway to focus and then press it
fully to take the picture.
∫ When operating buttons
Note
•
If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
• AF Tracking will not operate when it has failed to AF track. AF mode will be switched to [Ø] in
that case.
• [FACE RECOG.] does not work when AF tracking is active.
• In the following cases, [ ] operates as [Ø]
– When the film mode is [STANDARD]( ), [DYNAMIC]( ), [SMOOTH]( )
– When My Colour Mode is [MONOCHROME]
• Dynamic tracking function may not work in the following cases:
– When the subject is too small
– When the recording location is too dark or bright
– When the subject is moving too fast
– When the background has the same or similar colour to the subject
– When jitter is occurring
– When zoom is operated
Setting up [ ] (AF Tracking)
1 Bring the subject to the AF tracking
frame, and press the shutter button
halfway to lock the subject.
A AF tracking frame (White)
B AF tracking frame (Yellow)
Before locking Locked
• When the subject is recognised, AF area will turn green and the subject will be locked.
Focus and exposure will be fixed automatically and continuously in accordance with the
movement of the subject when you release the shutter button (Dynamic tracking). AF
area will be displayed in yellow in this case.
• Lock is cancelled when [MENU/SET] is pressed.
2 Press the shutter button halfway to focus and then press it fully to take the
picture.
A
B
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 82 ページ ２０１０年４月１３日 火曜日 午後７時４０分