Operating Instructions
93
VQT2S42
Advanced (Recording pictures)
Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• Refer to P70 for the flash range.
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [ ] is selected.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• The setting is fixed to [ ] in the following cases.
– In [BABY1]/[BABY2] and [PET] in scene mode
– In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR
SPORTS] in advanced scene mode
• Programme Shift cannot be activated when the ISO sensitivity is set to [ ].
• You cannot select [ ] in Shutter-Priority AE Mode and Manual Exposure Mode. Also, you
cannot select [AUTO] in Manual Exposure Mode.
• To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE
REDUCTION] in [FILM MODE] towards [_] or setting the items except [NOISE REDUCTION]
towards [`] to take pictures. (P95)
• The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P141) is
set to [ON]. Set using the Quick Menu (P34).
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 93 ページ 2010年4月13日 火曜日 午後7時40分