Operating Instructions

VQT2S42
94
Advanced (Recording pictures)
[REC] mode:
Change tone of the colour for the picture to be
taken (Film Mode)
[You can only select [STANDARD] and [STANDARD] ( ) in [ ], [¿], [], [], [],
[ ] and [ ] mode.]
Just as each type of film for film cameras has its own colour tone and contrast
characteristics, Film Mode allows you to select up to 9 different “digital films”, colour tones,
in the same way as you would select different films for film cameras. Select different
settings in Film Mode to match the photo look you wish to achieve.
Press 2 ().
Touch [2]/[1] to select an item.
When you touch [ ] on the screen shown right, explanations
about each Film Mode are displayed. (When you touch
[CANCEL], the screen returns to the previous screen.)
Touch [SET].
You can also press the shutter button halfway to set.
Note
In Film Mode, the camera may do something equivalent to pull processing or push processing
to create a picture with particular characteristics. The shutter speed may become very slow at
this time.
The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P141) is
set to [ON]. Set using the Quick Menu (P34).
Item Effect
[STANDARD] (COLOUR) This is the standard setting.
[DYNAMIC] (COLOUR) The saturation and contrast of the stored colours are increased.
[SMOOTH] (COLOUR) The contrast is lowered for smoother and clearer colour.
[NATURE] (COLOUR) Brighter red, green and blue. Enhanced beauty of nature.
[NOSTALGIC] (COLOUR) Lower saturation and contrast. Reflecting passage of time.
[VIBRANT] (COLOUR) Higher saturation and contrast than dynamic.
[STANDARD] ( ) This is the standard setting.
[DYNAMIC] ( ) The contrast is increased.
[SMOOTH] ( ) Smooths the picture without losing the skin texture.
[MY FILM 1]/[MY FILM 2] The saved setting is used.
[MULTI FILM]
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed. (Up to 3
pictures)
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 94 ページ 2010年4月13日 火曜日 午後7時40分