Operating Instructions
95
VQT2S42
Advanced (Recording pictures)
Touch the item.
Touch the slide bar.
• Registered settings are memorised even if the
camera is turned off.
Touch [MEMORY].
Touch [MY FILM 1] or [MY FILM 2].
• You can register 2 settings. ([MY FILM 1] and
[MY FILM 2])
(After registering, the Film Mode name that was
registered previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and
[MY FILM 2] at the time of purchase.
Touch [SET].
• You can also press the shutter button halfway to set.
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [_] or setting the items except [NOISE
REDUCTION] towards [`] to take pictures.
• If you adjust a Film Mode, [_] is displayed beside the Film Mode icon on the screen.
• You cannot adjust [SATURATION] in the black and white settings in Film Mode.
• Film Mode cannot be adjusted in the Intelligent auto mode, advanced scene mode and scene
mode.
Adjusting each Film Mode to the desired setting
Item Effect
[CONTRAST]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[SATURATION]
[r] The colours in the picture become vivid.
[s] The colours in the picture become natural.
[NOISE
REDUCTION]
[r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
S
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 95 ページ 2010年4月13日 火曜日 午後7時40分