Operating Instructions

VQT2S42

Advanced (Recording pictures)

It will take pictures changing the type of film in accordance with the setting every time the

shutter button is pressed. (Up to 3 pictures)

Touch [2]/[1] to select [MULTI FILM].

Select [MULTI FILM 1], [MULTI FILM 2], or

[MULTI FILM 3], and then touch [2]/[1] to

select the film to be set for each.

• [OFF] can be selected only for [MULTI FILM 3].

Touch [SET].

• You can also press the shutter button halfway to set.

Focus on the subject and take a picture.

• It will continuously take pictures by keeping the shutter button pressed when it is set to

burst mode. (Up to 3 pictures)

• When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is

pressed. (It will operate same as [ ] even if it is set to [ ].)

• Multi film indication ([ ]) displayed on the screen will flash until all pictures of preset

amount are taken.

Note

•

[STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in

[MULTI FILM 3] at the time of purchase.

• White Balance Bracket will be disabled when the Multi Film Bracket is set.

• Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.

Multi Film Bracket

DMC-G2K&G2W&G2EB-VQT2S42_eng.book 96 ページ２０１０年４月１３日　火曜日　午後７時４０分