Operating Instructions

- 77 -
Basic
• Imaging device and image processing is optimised when the camera is purchased. Use this function
when bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
• Dust Reduction Function will operate automatically when the camera is turned on, but you can use
this function when you see dust. (P213)
• Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn
the camera off during formatting.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• If the card cannot be formatted, please try another card before contacting your nearest Service
Centre.
[Pixel Refresh] It will perform optimisation of imaging device and image processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to the
front of the imaging device is performed.
[Format]
The card is formatted.
Formatting permanently deletes all data on your memory card.
Please be sure all pictures and motion pictures are saved
elsewhere before using this feature.