Operating Instructions

121
VQT2G56
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P30.
Type of optical measurement to measure brightness can be changed.
Applicable modes:
Note
• When the AF mode is set to [š] while [C] is selected, exposure is adjusted to the face of a
person, and when it is set to [ ], exposure is adjusted to the locked subject.
For details on [REC] mode menu settings, refer to P30.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
• Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher
than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
C [METERING MODE]
[C]: Multiple
This is the method in which the camera measures the most
suitable exposure by judging the allocation of brightness on the
whole screen automatically. Usually, we recommend using this
method.
[ ]: Centre weighted
This is the method used to focus on the subject on the centre
of the screen and measure the whole screen evenly.
[Ù]: Spot
This is the method to measure the subject in the spot metering
target A.
[I.EXPOSURE] (Intelligent exposure adjustment)
DMC-GF1EB-VQT2G56_eng.book 121 ページ ２００９年８月２５日 火曜日 午後６時５９分