Operating Instructions

VQT2G56
122
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P30.
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Applicable modes:
[OFF]/[ON]
Note
• If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not
move the camera at this time. After the countdown is finished, [PLEASE WAIT...] is displayed
for the same time as the selected shutter speed for signal processing.
• We recommend using a tripod when the shutter speed is slowed to take pictures.
• This does not operate during motion picture recording.
For details on [REC] mode menu settings, refer to P30.
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Applicable modes:
[OFF]/[200]/[400]/[800]/[1600]
Note
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• It will work when the [SENSITIVITY] is set to [AUTO] or [ ].
For details on [REC] mode menu settings, refer to P30.
ISO sensitivity settings between [ISO100] and [ISO3200] are changed for every 1/3 EV.
Applicable modes:
Note
• When the setting is changed from [1/3 EV] to [1 EV], ISO sensitivity will be set to value closest
to the value set during the [1/3 EV]. (Set value will not restore when the setting is changed back
to [1/3 EV]. It will stay as the setting selected for [1 EV].)
[LONG SHTR NR]
[ISO LIMIT SET]
[ISO INCREMENTS]
[1/3 EV]: [100]/[125]/[160]/[200]/[250]/[320]/[400]/[500]/[640 ]/[800]/[1000]/[1250]/
[1600]/[2000]/[2500]/[3200]
[1 EV]: [100]/[200]/[400]/[800]/[1600]/[3200]
DMC-GF1EB-VQT2G56_eng.book 122 ページ ２００９年８月２５日 火曜日 午後６時５９分