Operating Instructions

167

VQT2G56

Others

Using the Remote Shutter (optional)

If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake)

when using a tripod and you can keep the shutter pressed fully when taking pictures with

[B] (Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the

camera.

Firmly connect the remote shutter to

the [REMOTE] socket on the camera as

far as it will go.

Take a picture.

1 Press the button lightly to press halfway.

2 Press the button fully to take the picture.

(Press it as far as it will go.)

∫ About [LOCK] on the remote shutter

• You can keep the shutter button pressed fully. This is

effective when taking pictures with Burst Mode (P67) or

in [B] (Bulb) (P87).

• While pressing the shutter button fully, slide it to the

[LOCK] side.

• Slide it to the other side to cancel [LOCK].

Note

• Do not use any other remote shutters except DMW-RSL1 (optional).

• You cannot operate the camera with the remote shutter in the following cases.

– When the power save mode is cancelled

• Record with Motion Picture P Mode (P106) when using for motion picture recording. Motion

picture recording can be started/stopped with the remote shutter.

DMC-GF1EB-VQT2G56_eng.book 167 ページ２００９年８月２５日　火曜日　午後６時５９分