Operating Instructions

VQT2G56
38
Preparation
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P151 for details.
• [–. –] is displayed as the lens firmware when the lens is not mounted.
• If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
• Use a battery with sufficient battery power or the AC adaptor (P168) when formatting. Do not
turn the camera off during formatting.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• If the card cannot be formatted, consult your nearest Service Centre.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI mini cable (optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
[VERSION DISP.]
This enables the firmware versions of the camera and lens to be
checked.
~ [LANGUAGE]
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
[¢]
[FORMAT]
The card is formatted.
Formatting permanently deletes all data on your memory
card. Please be sure all pictures and motion pictures are
saved elsewhere before using this feature.
DMC-GF1EB-VQT2G56_eng.book 38 ページ ２００９年８月２５日 火曜日 午後６時５９分