Operating Instructions

VQT2G56

Advanced (Recording pictures)

Press 2/1 to select an item.

• You can also use the rear dial to select.

• When you press [DISPLAY] on the screen shown right,

explanations about each Film Mode are displayed. (When you

press [DISPLAY] again, the screen returns to the previous

screen.)

Press [MENU/SET] to set.

• You can also press the shutter button halfway to set.

Note

• You can also set from the Quick Menu. (P32)

• Use the Quick Menu (P32) to set when in Intelligent Auto Mode.

• In Film Mode, the camera may do something equivalent to pull processing or push processing

to create a picture with particular characteristics. The shutter speed may become very slow at

this time.

Press 2/1 to select a film.

Press 3/4 to select an item and 2/1 to adjust.

• You can also use the rear dial to adjust.

• Registered settings are memorised even if the camera is

turned off.

Item Effect

[STANDARD] (COLOUR) This is the standard setting.

[DYNAMIC] (COLOUR) The saturation and contrast of the stored colours are increased.

[NATURE] (COLOUR) Brighter red, green and blue. Enhanced beauty of nature.

[SMOOTH] (COLOUR) The contrast is lowered for smoother and clearer colour.

[NOSTALGIC] (COLOUR) Lower saturation and contrast. Reflecting passage of time.

[VIBRANT] (COLOUR) Higher saturation and contrast than dynamic.

[STANDARD] ( ) This is the standard setting.

[DYNAMIC] ( ) The contrast is increased.

[SMOOTH] ( ) Smooths the picture without losing the skin texture.

[MY FILM 1]/[MY FILM 2] The saved setting is used.

[MULTI FILM]

It will take pictures changing the type of film in accordance with

the setting every time the shutter button is pressed. (Up to 3

pictures)

Adjusting each Film Mode to the desired setting

DMC-GF1EB-VQT2G56_eng.book 83 ページ２００９年８月２５日　火曜日　午後６時５９分