Operating Instruction

Preparation/Basic
12
SQT0426 (ENG)
∫ Lens
•
The interchangeable lens (H-FS12032) does not have a focus ring, but you can use manual
focus by operating the camera. Refer to P23 for details.
1 Remove the hot shoe cover by pulling it in the
direction indicated by arrow
2
while pressing
it in the direction indicated by arrow
1
.
2 Turn off the camera and the flash.
3 Slide the flash firmly all the way into the
camera’s hot shoe until it clicks into place.
•
Turn on the camera and the flash when recording images.
A Flash ON/OFF switch
• To remove the flash, pull the flash in the direction of the arrow while
pressing and holding the lock release button
B
.
H-FS12032
H-FS35100
H-X015
1 Lens surface
2 Tele
3 Zoom ring
4 Wide
5 Contact point
6 Lens fitting mark (P15)
7 Focus ring
8 Decoration ring
•
Remove this cover when using the lens
hood.
9 Aperture ring
•
Rotate this to adjust the aperture value.
• If you set the camera to Aperture-Priority AE
Mode or Manual Exposure Mode, the
aperture value of the ring will be enabled.
• If you set the position of the aperture ring to
[A], the aperture value of the camera will be
enabled.
• When the aperture ring is enabled, check if
the aperture value has changed after
attaching or removing the decoration ring.
10 [AF/MF] switch
•
When either the [AF/MF] switch of the lens or
the setting of the camera is set to [MF],
Manual Focus (MF) is enabled.
Attaching the Flash (Supplied)
3 4 5 61 2
7 4 5 61 2 3
78 9 10 5 61
DMC-GM5K&GM5L&GM5W-SQT0426_eng.book 12 ページ ２０１４年９月１０日 水曜日 午後１１時１分
Preparation/Basic
12
SQT0426 (ENG)
∫ Lens
•
The interchangeable lens (H-FS12032) does not have a focus ring, but you can use manual
focus by operating the camera. Refer to P23 for details.
1 Remove the hot shoe cover by pulling it in the
direction indicated by arrow
2
while pressing
it in the direction indicated by arrow
1
.
2 Turn off the camera and the flash.
3 Slide the flash firmly all the way into the
camera’s hot shoe until it clicks into place.
•
Turn on the camera and the flash when recording images.
A Flash ON/OFF switch
• To remove the flash, pull the flash in the direction of the arrow while
pressing and holding the lock release button
B
.
H-FS12032
H-FS35100
H-X015
1 Lens surface
2 Tele
3 Zoom ring
4 Wide
5 Contact point
6 Lens fitting mark (P15)
7 Focus ring
8 Decoration ring
•
Remove this cover when using the lens
hood.
9 Aperture ring
•
Rotate this to adjust the aperture value.
• If you set the camera to Aperture-Priority AE
Mode or Manual Exposure Mode, the
aperture value of the ring will be enabled.
• If you set the position of the aperture ring to
[A], the aperture value of the camera will be
enabled.
• When the aperture ring is enabled, check if
the aperture value has changed after
attaching or removing the decoration ring.
10 [AF/MF] switch
•
When either the [AF/MF] switch of the lens or
the setting of the camera is set to [MF],
Manual Focus (MF) is enabled.
Attaching the Flash (Supplied)
3 4 5 61 2
7 4 5 61 2 3
78 9 10 5 61
DMC-GM5K&GM5L&GM5W-SQT0426_eng.book 12 ページ ２０１４年９月１０日 水曜日 午後１１時１分
Preparation/Basic
12
SQT0426 (ENG)
∫ Lens
•
The interchangeable lens (H-FS12032) does not have a focus ring, but you can use manual
focus by operating the camera. Refer to P23 for details.
1 Remove the hot shoe cover by pulling it in the
direction indicated by arrow
2
while pressing
it in the direction indicated by arrow
1
.
2 Turn off the camera and the flash.
3 Slide the flash firmly all the way into the
camera’s hot shoe until it clicks into place.
•
Turn on the camera and the flash when recording images.
A Flash ON/OFF switch
• To remove the flash, pull the flash in the direction of the arrow while
pressing and holding the lock release button
B
.
H-FS12032
H-FS35100
H-X015
1 Lens surface
2 Tele
3 Zoom ring
4 Wide
5 Contact point
6 Lens fitting mark (P15)
7 Focus ring
8 Decoration ring
•
Remove this cover when using the lens
hood.
9 Aperture ring
•
Rotate this to adjust the aperture value.
• If you set the camera to Aperture-Priority AE
Mode or Manual Exposure Mode, the
aperture value of the ring will be enabled.
• If you set the position of the aperture ring to
[A], the aperture value of the camera will be
enabled.
• When the aperture ring is enabled, check if
the aperture value has changed after
attaching or removing the decoration ring.
10 [AF/MF] switch
•
When either the [AF/MF] switch of the lens or
the setting of the camera is set to [MF],
Manual Focus (MF) is enabled.
Attaching the Flash (Supplied)
3 4 5 61 2
7 4 5 61 2 3
78 9 10 5 61
DMC-GM5K&GM5L&GM5W-SQT0426_eng.book 12 ページ ２０１４年９月１０日 水曜日 午後１１時１分
12
SQT0426 (HR)
■Objektiv
• Izmjenjivi objektiv (H-FS12032) nema prsten za fokusiranje, ali možete se koristiti ručnim
fokusiranjem radom s fotoaparatom. Detalje potražite na 23. str.
Pričvršćivanje bljeskalice (isporučena)
1 Poklopac spojnice pribora uklonite tako da ga
povučete u smjeru strelice ❷ dok ga pritišćete
u smjeru strelice ❶.
2 Isključite fotoaparat i bljeskalicu.
3 Čvrsto gurnite bljeskalicu u spojnicu za pribor
fotoaparata do kraja dok ne sjedne na svoje
mjesto.
• Uključite fotoaparat i bljeskalicu kada snimate slike.
Ⓐ Prekidač ON/OFF (Uklj./Isklj.) za bljeskalicu
• Da biste uklonili bljeskalicu, povucite bljeskalicu u smjeru strelice dok
držite pritisnutim gumb za otključavanje Ⓑ.
1 Površina objektiva
2 Tele
3 Prsten za zumiranje
4 Wide
5 Točka kontakta
6 Oznaka za podešavanje objektiva (15. str.)
7 Prsten za fokusiranje
8 Ukrasni prsten
• Uklonite ovaj poklopac kad se koristite
sjenilom objektiva.
9 Prsten otvora blende
• Zakrenite ga da biste podesili vrijednost
otvora blende.
• Ako postavite fotoaparat na automatsku
ekspoziciju s prioritetom otvora blende ili
ručnu ekspoziciju, omogućit će se vrijednost
otvora blende prstena.
• Ako postavite položaj prstena otvora blende
na [A], omogućit će se vrijednost otvora
blende fotoaparata.
• Kada je omogućen prsten otvora blende,
provjerite je li se vrijednost otvora blende
promijenila nakon pričvršćivanja ili
uklanjanja ukrasnog prstena.
10 Prekidač [AF+MF] (Auto. fokus + Ručno
fokus.)
• Kada je prekidač [AF/MF] objektiva ili
postavka fotoaparata postavljena na [MF],
omogućeno je ručno fokusiranje (MF).
Priprema/Osnovno