Operating Instruction

Table Of Contents
147
5. Focus and Brightness (Exposure) Settings
You can set the focus position precisely by enlarging the screen.
The focus position cannot be set at the edge of the screen.
1 Press 2 ().
2 Select [ ] and press 4.
3 Press 3/4/2/1 to set the focus position and then
press [MENU/SET].
The assist screen for setting the focus position is
displayed in an enlarged size.
The assist screen can also be displayed by touching the
subject.
4 Move [+] to the position to be in focus.
When the picture is displayed in windowed mode, you can enlarge/reduce the picture by
approximately 3 to 6
k; when the picture is displayed in full screen, you can enlarge/
reduce the picture by approximately 3 to 10
k.
On the assist screen, it is also possible to record a picture by touching [ ].
When selecting [ ]
Button
operation
Touch
operation
Description of operation
3/4/2/1 Touching Moves [+].
s
Pinching in/
out
Enlarges/reduces the screen (by steps of 0.1
k)
s Enlarges/reduces the screen (by steps of 1.0k)
Switches the enlarged display (windowed/full screen)
[DISP.] [Reset] Resets [+] back to the centre.
Setting the duration for which the screen is enlarged
> [Custom] > [Pinpoint AF Time] >
[LONG] (Approx. 1.5 seconds)/[MID] (Approx. 1.0 second)/[SHORT]
(Approx. 0.5 second)
MENU