Operating Instruction

Table Of Contents
5. Focus and Brightness (Exposure) Settings
154
You can also enlarge the area by rotating the focus ring, moving the focus lever, or
pinching out (P53) the screen or touching the screen twice.
You can also determine the area to be enlarged by dragging (P53) the screen.
If you press [DISP.], the area to be enlarged will be reset to the centre.
4
Adjust the focus.
A Indicator for (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
The in-focus portions will be highlighted. (Peaking)
You can check whether the point of focus is to the near
side or to the far side. (MF Guide)
You can perform the following operations:
¢ When using an interchangeable lens with no focus ring, you can perform these
operations after pressing
4 to display the screen that lets you set the area to be
enlarged.
When the picture is displayed in windowed mode, you can enlarge/reduce the picture by
approximately 3 to 6
k; when the picture is displayed in full screen, you can enlarge/
reduce the picture by approximately 3 to 10
k.
Button operation Touch operation Description of operation
3/4/2/1
¢
Dragging Moves the enlarged area
s
Pinching in/out Enlarges/reduces the screen (by steps of 0.1k)
s Enlarges/reduces the screen (by steps of 1.0k)
Switches the enlarged display (windowed/full
screen)
[DISP.]
¢
[Reset]
¢
Resets the area to be enlarged back to the
centre.
AF
+
+
D
A
C
B