Operating Instruction

Table Of Contents
199
8. Stabiliser, Zoom and Flash
Increasing the zoom magnification in steps
This can be used only when recording pictures.
1 Select the menu. (P57)
2 Set a function button to [Zoom Control]. (P64)
The following step is an example in which [Zoom Control] is assigned to [Fn1].
3 Press [Fn1].
4 Press 2/1 or 3/4.
The zoom operation is terminated when [Fn1] is pressed again or a certain amount of time
passes.
When using an interchangeable lens that supports the power zoom, Extra Tele Conversion
becomes available after zooming in to the Tele end of the optical zoom.
A Optical Zoom range (Focal length)
¢
B Extra Tele Conversion range for still picture recording
(Zoom magnification)
¢
This zoom slider is displayed when using an
interchangeable lens that supports the power zoom.
A constant zoom speed will be set.
The indicated zoom magnification is an approximation.
Fixing the zoom magnification at the maximum level
Select the menu. (P57)
> [Rec] > [Ex. Tele Conv.] > [ZOOM]
3/1: Tele (Enlarges distant subject)
4/2: Wide (Widens angle of view)
> [Rec] > [Ex. Tele Conv.] > [TELE CONV.]
> [Motion Picture] > [Ex. Tele Conv.] > [ON]
[OFF] [TELE CONV.]/[ON]
MENU
EX1.0x EX2.0x
4:3 4:3
BA
MENU
MENU
4:3 4:3