Operating Instruction

Table Of Contents
273
11. Using the Wi-Fi function
1 Select the menu.
2 Select [Via Network] or [Direct], and connect. (P294)
3 Select a device you want to connect.
4 Check the send settings, and select [Set].
To change the send setting, press [DISP.]. (P302)
5 Select [Single Select] or [Multi Select].
Select and send the images ([Send Images Stored in the Camera])
> [New Connection] > [Send Images Stored in the Camera] >
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start “Image App”. (P261)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1 Start “Image App”. (P261)
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit, and
then enter the password.
3 Start “Image App”. (P261)
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
The setting is cancelled when the picture is selected
again.
2 Select [OK].
The number of pictures that can be sent by [Multi
Select] is limited.
Confirmation screen is displayed. It is executed when [Yes] is selected.
To change the send settings on a screen that is displayed after the image has been sent,
press [DISP.]. To terminate the connection, select [Exit].
Wi-Fi
6HW
2.