Operating Instruction

Table Of Contents
11. Using the Wi-Fi function
280
1 Select the menu.
2 Select [Via Network] or [Direct], and connect. (P294)
3 Select the PC you want to connect to.
When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
4 Select the folder you want to send.
5 Check the send settings, and select [Set].
To change the send setting, press [DISP.]. (P302)
6 Take pictures.
To change the setting or disconnect, press [Wi-Fi]. (P258)
You cannot change the settings while sending pictures. Wait until sending is complete.
(You can also terminate the connection by performing the following operations:
[Setup]
[Wi-Fi]
[Wi-Fi Function]
[Yes]
)
Sending an image each time a recording is made ([Send Images While
Recording])
> [New Connection] > [Send Images While Recording] > [PC]
Wi-Fi
MENU