Operating Instruction

Table Of Contents
33
2. Getting Started/Basic Operations
Remove the lens rear cap from the lens.
If the body cap is fitted to the camera, remove it.
Align the lens fitting marks A and then rotate the lens in the direction of
the arrow until it clicks.
Do not press the lens release button B when you attach a lens.
Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
Do not insert your fingers into the mount when the lens and body cap
are removed from the camera body.
It is recommended to attach the lens cap or attach the MC Protector
(optional) to protect the lens surface when carrying. (P325)
When using the interchangeable lens (H-FS12032/H-FS35100)
Rotate the zoom ring of the lens.
C Te le
D Wide
If you operate the zoom after bringing the subject into focus,
the subject may go out of focus slightly. Operate the zoom
first.
You can enhance the telescopic effect by setting [Ex. Tele
Conv.] (Photo), [Ex. Tele Conv.] (Motion Picture), and [Digital
Zoom]. (P198)
Attaching the lens
Zoom operations