Operating Instruction
3. Recording Modes
94
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
• In the following cases, suitable exposure cannot be set.
– When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P93)
– When using a lens that includes an aperture ring
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode.
For more details on Manual Exposure Assistance, refer to
P91.
1 Set a function button to [One Push AE]. (P64)
•
The following step is an example in which [One Push AE] is assigned to [Fn7].
2 Touch [ ].
3 (When exposure is not adequate)
Touch [Fn7].
9898
2
00
00
-
3
-
3
16000160003.53.5
A
0
2
00
6060
SSSS
SS
F
F
3.5
15 250
4.0 5.6 8.0
1256030
Fn6
SNAP
AE
Fn7
9898
2
00
00
-
3
-
3
16000160003.53.5
3. Recording Modes
94
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
• In the following cases, suitable exposure cannot be set.
– When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P93)
– When using a lens that includes an aperture ring
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode.
For more details on Manual Exposure Assistance, refer to
P91.
1 Set a function button to [One Push AE]. (P64)
•
The following step is an example in which [One Push AE] is assigned to [Fn7].
2 Touch [ ].
3 (When exposure is not adequate)
Touch [Fn7].
9898
2
00
00
-
3
-
3
16000160003.53.5
A
0
2
00
6060
SSSS
SS
F
F
3.5
15 250
4.0 5.6 8.0
1256030
Fn6
SNAP
AE
Fn7
9898
2
00
00
-
3
-
3
16000160003.53.5
94
3. Načini snimanja
Jednostavno postavljanje otvora blende/brzine zatvarača za
odgovarajuću ekspoziciju (Prilagodba auto. ekspozicije jednim pritiskom)
Primjenjivi načini rada:
Kada je postavljena ekspozicija presvijetla ili pretamna, možete upotrebljavati auto. ekspoziciju
jednim pritiskom da biste postigli odgovarajuću postavku ekspozicije.
Prepoznavanje neodgovarajuće ekspozicije
• Ako vrijednosti otvora blende i brzine zatvarača trepere
crveno Ⓐ kada pritisnete okidač dopola.
• Ako je pomoć pri ručnoj ekspoziciji drugačija od
one u načinu ručne ekspozicije.
Detalje o pomoći pri ručnoj ekspoziciji potražite na 91. str.
1 Postavite funkcijski gumb na [One Push AE] (Auto. ekspozicija jednim
pritiskom). (64. str.)
• Sljedeći korak primjer je kako se [One Push AE] dodjeljuje funkciji [Fn7].
2 Dodirnite [ ].
3 (kada ekspozicija nije odgovarajuća)
Pritisnite [Fn7].
• Prikazuje se mjerač ekspozicije, a otvor blende i brzina zatvarača mijenjaju se kako bi
ostvarili primjerenu ekspoziciju.
• U sljedećim slučajevima nije moguće postaviti odgovarajuću ekspoziciju.
– Kada je objekt iznimno taman i nije moguće postići odgovarajuću ekspoziciju
promjenom vrijednosti otvora blende ili brzine zatvarača
– Kod snimanja s bljeskalicom
– U načinu pregleda (93. str.)
– Pri upotrebi objektiva s prstenom otvora blende
3. Recording Modes
94
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
• In the following cases, suitable exposure cannot be set.
– When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P93)
– When using a lens that includes an aperture ring
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode.
For more details on Manual Exposure Assistance, refer to
P91.
1 Set a function button to [One Push AE]. (P64)
•
The following step is an example in which [One Push AE] is assigned to [Fn7].
2 Touch [ ].
3 (When exposure is not adequate)
Touch [Fn7].
9898
2
00
00
-
3
-
3
16000160003.53.5
A
0
2
00
6060
SSSS
SS
F
F
3.5
15 250
4.0 5.6 8.0
1256030
Fn6
SNAP
AE
Fn7
9898
2
00
00
-
3
-
3
16000160003.53.5