Operating Instructions for advanced features Digital Camera Model No. DMC-GM5 Please read these instructions carefully before using this product, and save this manual for future use.
Finding the information you need In this “Operating Instructions for advanced features”, you can find the information you need from the following pages. By clicking a page number, you can jump to the linked page and quickly find the information. Search from “Contents” Click this icon to jump to “Contents”.
How to use this manual About the indication of the applicable mode Applicable modes: The icons indicate the modes available for a function. • Black icons: Applicable modes • Grey icons: Unavailable modes will differ depending on the Recording Modes registered under custom settings. • Click a cross reference in the text to jump to the corresponding page. • By entering keywords in the search field at the top of the Adobe Reader screen, you can run a keyword search and jump to the corresponding page.
Quick Start Guide If you want to start taking pictures now, refer to the steps for using the Intelligent Auto Mode as a guide. In Intelligent Auto Mode, you can leave the settings to the camera and take pictures easily. 1 Attach the shoulder Strap. (P20) • Attach the other side of the shoulder strap. Charge the battery. (P21) 2 3 A : Plug-in type B : Inlet type Insert the card (optional)/the battery.
[When the interchangeable lens (H-FS12032/ H-FS35100) is used] 6 7 Extend the lens barrel. (P39) Format the card (initialisation). (P29) Set the mode dial to [¦]. (P42) 8 • The settings of the main functions are adjusted automatically. A Press the shutter button halfway to focus. 9 A Focus indication • Once the subject is in focus, the focus indication is displayed. Press the shutter button fully (push it in further), and take the picture. (P40) Check the picture you have taken.
Contents Finding the information you need..............................................................................2 How to use this manual.............................................................................................3 Quick Start Guide ......................................................................................................4 1. Before Use Care of the camera .................................................................................................
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) ...................75 • Recording night scenes ([iHandheld Night Shot]) ..........................................79 • Combining pictures into a single picture with rich gradation ([iHDR]).............80 • Taking a picture with a blurred background (Defocus Control).......................81 • Recording images by changing the brightness or colour tone .......................
• Selecting the Auto Focus Mode ...................................................................141 • Setting up position of the AF area/changing size of the AF area .................145 • Setting the AF area position with the Touch Pad..........................................148 • Optimising the focus and brightness for a touched position .........................149 • Setting the desired focus method .................................................................
. Recording Motion Pictures Recording Motion Picture......................................................................................214 • Setting the format, size and recording frame rate ........................................217 • How to set focus when recording a motion picture ([Continuous AF]) .........219 Recording still pictures while recording motion pictures .......................................220 Recording Snap Movies ....................................................................
• [Print Set]......................................................................................................252 • [Protect] ........................................................................................................254 • [Face Rec Edit] .............................................................................................255 • [Picture Sort].................................................................................................255 • [Delete Confirmation]..................
Printing the Pictures ..............................................................................................318 13. Others Optional accessories.............................................................................................324 Monitor Display/Viewfinder Display.......................................................................326 Message Display...................................................................................................331 Menu list...........................
1. Before Use Care of the camera Do not subject to strong vibration, shock, or pressure. • The lens, monitor, or external case may be damaged if used in the following conditions. It may also malfunction or image may not be recorded if you: – Drop or hit the camera. – Press hard on the lens or the monitor. This camera is not dust/drip/water proof. Avoid using the camera in places with a lot of dust, water, sand, etc.
1. Before Use Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Operating Instructions”. • Battery Pack is indicated as battery pack or battery in the text. • Battery Charger is indicated as battery charger or charger in the text.
1. Before Use Names and Functions of Components ∫ Camera body 1 234 5 6 7 68 9 10 11 12 13 14 15 16 17 Status indicator (P36)/ Wi-Fi® connection lamp (P258) 10 • The lamp lights green when the camera is turned on, and lights blue when it is connected to Wi-Fi.
1. Before Use 19 20 21 22 23 24 25 26 27 28 18 29 リヴヰ 31 32 33 34 35 18 Touch screen (P53)/monitor (P326) 19 Eye Cup (P359) 20 Viewfinder (P51) 21 Eye sensor (P51) 36 [DISP.] button (P45, 49) 31 • Each time this is pressed, the display on the monitor is switched. [ ] (Delete) button (P233)/ ] (Quick Menu/Return) button 32 [ (P60) 22 [LVF] button (P51)/[Fn2] button (P64) 23 [Wi-Fi] button (P258)/[Fn1] button (P64) 33 Tripod mount (P365) • A tripod with a screw length of 5.5 mm (0.
1. Before Use ∫ Lens H-FS12032 5 1 2 6 Lens surface Tele Zoom ring (P197) Wide Contact point Lens fitting mark (P33) Focus ring (P153) Decoration ring • Remove this cover when using the lens 9 Aperture ring • Rotate this to adjust the aperture value. • If you set the camera to Aperture-Priority hood. 3 4 H-FS35100 5 1 1 2 3 4 5 6 7 8 AE Mode or Manual Exposure Mode, the aperture value of the ring will be enabled.
1. Before Use About the Lens This unit can use the dedicated lenses compatible with the Micro Four ThirdsTM System lens mount specification (Micro Four Thirds mount). You can also use a lens of any of the following standards by attaching a mount adaptor.
1. Before Use About the firmware of your interchangeable lens For smoother recording, we recommend updating the firmware of the interchangeable lens to the latest version. • To view the latest information on the firmware or to download the firmware, visit the support site below: http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.) • To check the firmware version of the interchangeable lens, attach it to the camera body and select [Version Disp.] in the [Setup] menu.
1. Before Use Cards Compatible with this unit The following cards which conform to the SD standard can be used with this unit. (These cards are indicated as card in the text.) SD Memory Card (8 MB to 2 GB) SDHC Memory Card (4 GB to 32 GB) SDXC Memory Card (48 GB, 64 GB) • SDHC Memory Cards and SDXC Memory Cards can be used only with their compatible devices. • Check that the PC and other equipment are compatible when using the SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.
2. Getting Started/Basic Operations Attaching the Shoulder Strap • We recommend attaching the shoulder strap when using the camera to prevent it from dropping. 1 Pass the shoulder strap through the shoulder strap eyelet on the camera body. A: Shoulder strap eyelet 2 3 4 A Pass the end of the shoulder strap through the ring in the direction of the arrow and then pass it through the stopper. Pass the end of the shoulder strap through the hole on the other side of the stopper.
2. Getting Started/Basic Operations Charging the Battery ∫ About batteries that you can use with this unit It has been found that counterfeit battery packs which look very similar to the genuine product are made available for purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion.
2. Getting Started/Basic Operations ∫ About the [CHARGE] indicator On: Charging. Off: Charging has completed. (Disconnect the charger from the electrical socket and detach the battery after charging is completed.) • When the [CHARGE] indicator flashes – The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF). – The terminals of the charger or the battery are dirty.
2. Getting Started/Basic Operations Approximate operating time and number of recordable pictures By CIPA standard in Programme AE Mode The values in “( )” indicate the values when the flash is fired in full brightness for one in every two pictures you take. [When the flash (supplied) is used] ∫ Recording still pictures (when using the Monitor) When the interchangeable lens (H-FS12032) is used Number of recordable pictures Approx. 250 pictures (Approx. 210 pictures) Recording time Approx.
2. Getting Started/Basic Operations Recording conditions by CIPA standard • CIPA is an abbreviation of [Camera & Imaging Products Association]. • Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when monitor/viewfinder is on. • When using a Panasonic SDHC Memory Card. • Using the supplied battery. • Starting recording 30 seconds after the camera is turned on.
2. Getting Started/Basic Operations ∫ Recording motion pictures (when using the monitor) [AVCHD] (Recording with picture quality set to [FHD/17M/50i]) When the interchangeable lens (H-FS12032) is used Recordable time Approx. 80 min Actual recordable time Approx. 40 min When the interchangeable lens (H-FS35100) is used Recordable time Approx. 90 min Actual recordable time Approx. 45 min When the interchangeable lens (H-X015) is used Recordable time Approx. 90 min Actual recordable time Approx.
2. Getting Started/Basic Operations ∫ Playback (when using the monitor) When the interchangeable lens (H-FS12032) is used Playback time Approx. 160 min When the interchangeable lens (H-FS35100) is used Playback time Approx. 160 min When the interchangeable lens (H-X015) is used Playback time Approx. 160 min • The operating times and number of recordable pictures will differ according to the environment and the operating conditions.
2. Getting Started/Basic Operations Inserting and Removing the Card (optional)/ the Battery • Check that this unit is turned off. • We recommend using a Panasonic card. 1 1: Slide the release lever in the direction of the arrow. 2: Open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product.
2. Getting Started/Basic Operations 3 1: Close the card/battery door. 2: Slide the release lever in the direction of the arrow. • Remove the battery after use. (The battery will be exhausted if left for a long period of time after being charged.) • The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction.
2. Getting Started/Basic Operations About the Card Access to the card The access indication displays red when pictures are being recorded on the card. • During access (image writing, reading and deleting, 50 i 4:3 L formatting etc.), do not turn this unit off, remove the battery, card or disconnect the AC adaptor (optional). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally.
2.
2. Getting Started/Basic Operations • When a high ambient temperature, continuous recording or other conditions cause the camera to overheat, the following restrictions will occur to protect the camera. Wait until the camera cools down. – Continuous recording, motion picture recording, and the Wi-Fi connection will be temporarily disabled. – If you continue recording even when [ ] is flashing on the screen, a message will be displayed and the camera will turn off automatically.
2. Getting Started/Basic Operations Changing the Lens By changing the lens, you will increase your picture taking-options and further your enjoyment of the camera. Change the lens using the following procedure. • Check that the camera is turned off. • When attaching or detaching the interchangeable lens (H-FS12032/H-FS35100), retract the lens barrel. • Change lenses where there is not a lot of dirt or dust. Refer to P359 when dirt or dust gets on the lens. Detaching the lens • Attach the lens cap.
2. Getting Started/Basic Operations Attaching the lens • Remove the lens rear cap from the lens. • If the body cap is fitted to the camera, remove it. Align the lens fitting marks A and then rotate the lens in the direction of the arrow until it clicks. • Do not press the lens release button B when you attach a lens. • Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.
2. Getting Started/Basic Operations Attaching the Lens Hood When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast. The lens hood cuts off excess lighting and improves the picture quality. • The interchangeable lens (H-FS12032) does not have a lens hood.
2. Getting Started/Basic Operations ∫ Interchangeable Lens (H-X015) • Before attaching the lens hood, make sure to remove the lens cap. The lens hood cannot be attached unless you remove the lens cap. 1 Rotate the decoration ring A in the direction of the arrow to remove it. 2 Align the mounting index B on the lens hood with the mark on the tip of the lens.
2. Getting Started/Basic Operations Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Turn the camera on. • When the camera is turned on, the status indicator 1 lights up green. • If the language select screen is not displayed, proceed to step 4. 2 3 4 5 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute), and press 3/4 to set.
2. Getting Started/Basic Operations Changing the Clock Setting Select [Clock Set] in the [Setup] menu. (P57) • The clock can be reset as shown in steps 5 and 6 on P36. • The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.
2. Getting Started/Basic Operations Basic Operations Tips for taking good pictures Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Do not cover the AF assist lamp A, microphone B or the speaker C with your fingers or other objects. • Be careful not to move the camera when you press the shutter button. • Be sure to remove the lens cap when recording.
2. Getting Started/Basic Operations Extending/retracting the lens [when the interchangeable lens (H-FS12032/H-FS35100) is attached] ∫ How to Extend the Lens Rotate the zoom ring in the direction of arrow 1 from position A (the lens is retracted) to position B [12 mm to 32 mm (H-FS12032), 35 mm to 100 mm (H-FS35100)] to extend the lens. • When the lens barrel is retracted, images cannot be recorded.
2. Getting Started/Basic Operations Shutter button (Taking pictures) The shutter button works in two steps. To take a picture, press it. Press the shutter button halfway to focus. A Aperture value B Shutter speed C Focus indication • Aperture value and shutter speed are displayed. C (It will flash in red if the correct exposure is not achieved, except when set to flash.) • Once the subject is in focus, the focus indication is displayed. (When the subject is not in focus, the indication flashes) 3.
2. Getting Started/Basic Operations Displaying a picture right after it is taken MENU > [Custom] > [Auto Review] [Duration Time] Set the length of time that the picture is displayed after taking the still picture. [HOLD]: The pictures are displayed until shutter button is pressed halfway. [5SEC]/[4SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF] [Playback Operation Priority] [ON] Switching the display of the playback screen, deleting pictures, etc. are possible during [Auto Review].
2. Getting Started/Basic Operations Mode dial (Selecting a Recording Mode) Select the mode by rotating the mode dial. • Rotate the mode dial slowly to select the desired mode. Intelligent Auto Mode (P75) The subjects are recorded using settings automatically selected by the camera. Intelligent Auto Plus Mode (P83) Allows you to adjust the brightness and colour hue when in Intelligent Auto Mode. Programme AE Mode (P85) Records at the aperture value and shutter speed set by the camera.
2. Getting Started/Basic Operations Rear Dial There are 2 ways to operate the rear dial, rotating left or right, and deciding by pressing. Rotating: Selection of items or setting of values is performed during the various settings. Pressing: Operations that are the same as [MENU/SET] button, such as determine settings, etc., are performed during the various settings. • These operating instructions describe operations of the rear dial as follows: e.g.: When rotating the rear dial to the left or right e.g.
2. Getting Started/Basic Operations Cursor buttons/[MENU/SET] button Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed. • These operating instructions expresses the up, down, left, and right of the cursor button as 3/4/2/1.
2. Getting Started/Basic Operations [DISP.] button (Switching the displayed information) Press [DISP.] to switch the information displayed on the screen. ュリヴヱハ In Recording Mode • You can select between [ ] (monitor style) and [ ] (viewfinder style) for each of the monitor and the viewfinder display screen using [Monitor Disp. Style] and [LVF Disp.Style] in the [Custom] menu.
2. Getting Started/Basic Operations ([ ] viewfinder style) • Screen will switch as follows: (Example of display on viewfinder) With information (detailed information)¢ 50 i 4:3 L 0 With information (detailed information, tilt sensor display)¢ With information AFS 50 i 98 0 4:3 L AFS 0 98 With information (tilt sensor display) 98 0 98 ¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON].
2. Getting Started/Basic Operations Displaying/not displaying the histogram MENU > [Custom] > [Histogram] > [ON]/[OFF] You can set the position by pressing 3/4/2/1. • Direct touch operation is also possible from the recording screen. • A histogram is a graph that displays brightness along the horizontal axis (black to white) and the number of pixels at each brightness level on the vertical axis. It allows you to easily check a picture’s exposure.
2. Getting Started/Basic Operations ∫ About the tilt sensor display With the tilt sensor displayed, it is easy to correct the tilt of the camera etc. 1 2 Press [DISP.] to display the tilt sensor. Check the tilt of the camera. A Horizontal direction: Correcting tilt to the left B Vertical direction: Correcting downward tilt • When the tilt of the camera is little, the indicator changes to green.
2. Getting Started/Basic Operations In Playback Mode • Screen will switch as follows: Detailed information display¢2 With information¢1 4:3 L 1/98 0 AWB 200 ISO 0 200 AWB Without information (Highlight display)¢1, 2, 3, 4 60 F3.5 WB F3.5 60 Histogram display¢2 4:3 L AFS P F3.5 STD. 60 0 ISO200 10:00 1.DEC.2014 s RGB 100-0001 1/98 100-0001 Without information¢4 ¢1 If approximately 1 minute elapses without an operation being performed, part of the display will disappear. Press [DISP.
2. Getting Started/Basic Operations Displaying/not displaying white saturated areas MENU > [Custom] > [Highlight] > [ON]/[OFF] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white. This does not affect the recorded image. [ON] • If there are any white saturated areas, we recommend compensating the exposure towards negative (P161) referring to the histogram (P47) and then taking the picture again.
2. Getting Started/Basic Operations [LVF] button (Switching the Monitor/Viewfinder) Press [LVF] to switch between the Monitor and Viewfinder. A [LVF] button B Eye sensor [LVF]/[Fn2] button can be used in two ways, as [LVF] or as [Fn2] (function 2). The button can be used as the [LVF] button at the time of purchase. • Refer to P64 for details about the function button. ロヷョ ョㄏビ Press [LVF].
2. Getting Started/Basic Operations Setting the eye sensor sensitivity and the automatic switching of the display between the Monitor and Viewfinder MENU > [Custom] > [Eye Sensor] [Sensitivity] This will set the sensitivity of the eye sensor. [HIGH]/[LOW] [LVF/Monitor Switch] This will set the method for switching between the monitor and viewfinder.
2. Getting Started/Basic Operations Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. ∫ Touch To touch and release the touch screen. • When selecting features using the touch screen, be sure Fn3 to touch the centre of the desired icon. Fn4 Fn5 Fn6 SNAP Fn7 ∫ Drag A movement without releasing the touch screen. This can also be used to move to the next image during playback, etc.
2. Getting Started/Basic Operations Enabling/disabling the touch operation MENU > [Custom] > [Touch Settings] • When set to [OFF], no corresponding touch tab or touch icon is displayed on the screen. [Touch Screen] [ON] All touch operations. [ Sets a part of the touch screen to a non-touch-sensitive area. Touch operations in the area will be disabled. Please note that except when recording images, all touch operations can be performed.
2. Getting Started/Basic Operations Taking Pictures Using the Touch Function Taking pictures using the Touch Shutter function Applicable modes: Just by touching the subject you want as your point of focus, the camera will focus on the subject and take the picture automatically. 1 Touch [ ]. 2 Touch [ × ]. • Icon will change to [ ], and taking a picture with the Touch Shutter function becomes possible. AE 3 Touch the subject you wish to focus on, and then take a picture.
2. Getting Started/Basic Operations Easily Optimising the Brightness for a Specified Area (Touch AE) Applicable modes: You can easily optimise the brightness for a touched position. When the face of the subject appears dark, you can brighten the screen according to the brightness of the face. 1 Touch [ ]. 2 Touch [ AE ]. • The setting screen for the brightness optimisation position is displayed. • [Metering Mode] is set to [ AE ], which is used AE exclusively for the Touch AE.
2. Getting Started/Basic Operations Setting menu items You can set the menus using two types of operation—touch operations in which you touch the screen, and button operations in which you press the cursor button and rotate the rear dials. In these operating instructions, steps for setting a menu item are described as follows. Example: In the [Rec] menu, change [Quality] from [A] to [›] MENU 1 > [Rec] > [Quality] > [›] Press [MENU/SET].
2. Getting Started/Basic Operations ∫ Switching to other menus e.g.: Switching to the [Setup] menu from [Rec] menu. 1 2 Press 2. Press 3/4 to select a menu selector icon, such as [ ]. • You can also select a menu selector icon by rotating the 3 Press [MENU/SET]. • Select a menu item next and set it. rear dial. (In touch operation) Touch a menu selector icon, such as [ 2 ]. Press 3/4 of the cursor button to select the menu item and press [MENU/SET].
2. Getting Started/Basic Operations ∫ Close the menu Press [ ] or press the shutter button halfway. (In touch operation) Touch [ ]. • When [Menu Information] (P71) in the [Setup] menu is set to [ON], explanations of the menu items and settings are displayed on the menu screen. • If you set [Menu Resume] (P71) in the [Setup] menu to [ON], the screen shows the last selected menu item. It is set to [ON] at the time of purchase.
2. Getting Started/Basic Operations Calling frequently-used menus instantly (Quick Menu) By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. 1 2 Press [ ] to display the Quick Menu. Rotate the rear dial to select the menu item, then press the rear dial. 50 i 4:3 0 3.5 60 3 4 Rotate the rear dial to select the setting.
2. Getting Started/Basic Operations Switching the method for setting Quick Menu items MENU > [Custom] > [Q.MENU] [PRESET]: The default items can be set. [CUSTOM]: The Quick Menu will consist of desired items.
2. Getting Started/Basic Operations Change the Quick Menu to your preferred item When [Q.MENU] (P61) in the [Custom] menu is set to [CUSTOM], the Quick Menu can be changed as desired. Up to 15 items can be set to the Quick Menu. 1 Press 4 to select [ SET]. ] and then press [MENU/ AFS 4:3 L 2 3 Press 3/4/2/1 to select the menu item in the top row and then press [MENU/SET]. Press 2/1 to select the empty space in the bottom row and then press [MENU/SET]. A Items that can be setup as Quick Menus.
2. Getting Started/Basic Operations [Motion Picture] menu – [Snap Movie] (P221) – [Motion Pic. Set] – [Picture Mode] (P220) ([Rec Format] (P217)/[Rec Quality] (P217)) [Custom] menu – [Silent Mode] (P186) – [Peaking] (P158) – [Histogram] (P47) – [Guide Line] (P47) – [Zebra Pattern] (P193) 4 – [Monochrome Live View] (P194) – [Rec Area] (P215) – [Step Zoom] (P201) – [Zoom Speed] (P201) – [Touch Screen] (P54) Press [ ]. • It will return to screen of step 1.
2. Getting Started/Basic Operations Assigning frequently used functions to the buttons (function buttons) You can assign recording functions, etc. to specific buttons and icons. 1 Select the menu. MENU 2 3 > [Custom] > [Fn Button Set] Press 3/4 to select the function button you want to assign a function to and then press [MENU/ SET]. Press 3/4 to select the function you want to assign and then press [MENU/SET]. • Some functions cannot be assigned depending on the function button.
2. Getting Started/Basic Operations – [Silent Mode] (P186) – [Peaking] (P158) – [Histogram] (P47): [Fn5]¢ – [Guide Line] (P47) – [Zebra Pattern] (P193) [Custom] menu – [Monochrome Live View] (P194) – [Rec Area] (P215) – [Step Zoom] (P201) – [Zoom Speed] (P201) – [Touch Screen] (P54) ¢ Function button settings at the time of purchase. (At the time of purchase, function button settings are not assigned to [Fn7].) • Exit the menu after it is set.
2. Getting Started/Basic Operations Configuring basic settings of this unit (Setup Menu) For details on how to select the [Setup] menu settings, refer to P57. [Clock Set] and [Economy] are important items. Check their settings before using them. — [Clock Set] • Refer to P36 for details. Set the time in your home area and travel destination. You can display the local times at the travel destinations and record them on the pictures you take. • Set [Home] first thing after purchasing.
2. Getting Started/Basic Operations Departure date and return date of the trip as well as the name of the travel destination can be set. You can display the number of days that have passed when playing back the pictures and stamp it on the recorded pictures with [Text Stamp] (P242). [Travel Setup]: [SET]: Departure date and return date are set. Elapsed days (how many days after) of the trip are recorded.
2. Getting Started/Basic Operations This allows you to set the volume for electronic sound and the electronic shutter sound. [Beep Volume]: [Beep] [Shutter Vol.]: [u] (High) [ ] (High) [t] (Low) [ ] (Low) [s] (OFF) [ ] (OFF) [Shutter Tone]: [ 1 ]/[ 2 ]/[ 3 ] • When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] is set to [OFF]. Set the frame rate of the recording screen (Live View screen). [Live View Mode] [30fps]: Reduces the power consumption, extending the operating time.
2. Getting Started/Basic Operations Sets the monitor brightness according to the ambient light level. [Monitor Luminance] „ [AUTO]: The brightness is adjusted automatically depending on how bright it is around the camera. … 1 [MODE1]: Make the monitor brighter. … 2 [MODE2]: Set the monitor to the standard brightness. … 3 [MODE3]: Make the monitor darker. • The brightness of pictures displayed on the monitor is enhanced, so some subjects on the monitor may appear different from the actual subjects.
2. Getting Started/Basic Operations Select the USB communication system when connecting the camera to your PC or your printer with the USB connection cable (supplied). [USB Mode] y [Select on connection]: Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge. { [PictBridge(PTP)]: Set when connecting to a printer supporting PictBridge. z [PC]: Set when connecting to a PC. This sets how the unit connects to a television etc.
2. Getting Started/Basic Operations [3D Playback]: Set the output method for 3D pictures. [ ]: Set when connecting to a 3D compatible television. [ ]: Set when connecting to a television not compatible with 3D. Set this when you would like to view pictures in 2D (conventional image) on a 3D compatible television. • This will work when the HDMI micro cable is connected. • Refer to P306 for the method to play back 3D pictures in 3D.
2. Getting Started/Basic Operations [Language] Set the language displayed on the screen. • If you set a different language by mistake, select [~] from the menu icons to set the desired language. — [Version Disp.] • This enables the firmware versions of the camera and lens to be checked. • When using the flash (supplied), you can also check its firmware version. • Press [MENU/SET] on the version display screen to display information about the software on the unit. [Exposure Comp.
2. Getting Started/Basic Operations [Reset Wi-Fi Settings] Reset all settings in the [Wi-Fi] menu to factory default settings. (Excluding [LUMIX CLUB] (P293)) • Always reset the camera when disposing or selling it to prevent personal information saved within the camera from being misused. • Always reset the camera after making a copy of personal information when sending the camera in to be repaired. [Pixel Refresh] It will perform optimisation of imaging device and image processing.
2. Getting Started/Basic Operations Entering Text It is possible to enter babies’ and pets’ names and the locations when recording. When a screen that looks like the one on the right is displayed, you can enter characters. (Only alphabetical characters and symbols can be entered.) • Example of operation for displaying a screen: MENU 1 > [Rec] > [Profile Setup] > [SET] > [Baby1] > [Name] > [SET] Press 3/4/2/1 to select text and then press [MENU/SET] to register.
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) Recording Mode: In this mode, the camera makes the optimal settings for the subject and scene, so we recommend it when you wish to leave the settings to the camera and record without thinking about them.
3. Recording Modes 1 Set the mode dial to [¦]. • The camera will switch to either the most recently used of Intelligent Auto Mode or Intelligent Auto Plus Mode. At the time of purchase, the mode is set to Intelligent Auto Plus Mode. (P83) 2 Align the screen with the subject. • When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its colour changes to the usual red.
3. Recording Modes ∫ Functions that work automatically • The following functions are performed automatically to allow the camera to make the optimal settings. – Scene Detection – Backlight Compensation – [Face/Eye Detection] – Auto White Balance – Intelligent ISO sensitivity control – [Red-Eye Removal] – [i.Resolution] – [i.Dynamic] – [Long Shtr NR] – [Shading Comp.] – [Quick AF] – [AF Assist Lamp] ∫ Auto Focus, Face/Eye Detection , and Face Recognition The Auto Focus Mode is automatically set to [š].
3. Recording Modes ∫ Scene Detection • If a tripod is used, for instance, and the camera has judged that camera shake is minimal when the scene detection has been identified as [ ], the shutter speed will be slower than normal. Take care not to move the camera while taking pictures. • Due to conditions such as the ones below, a different scene may be identified for the same subject.
3. Recording Modes Recording night scenes ([iHandheld Night Shot]) Recording Mode: When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld night shots, pictures of the night scenery will be taken at a high burst speed and composed into a single picture. This mode is useful if you want to take stunning night shots with minimal jitter and noise, without using a tripod. MENU > [Rec] > [iHandheld Night Shot] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Combining pictures into a single picture with rich gradation ([iHDR]) Recording Mode: When [iHDR] is set to [ON] and there is, for example, strong contrast between the background and the subject, multiple still pictures are recorded with differing exposures and combined to create a single still picture rich in gradation. [iHDR] works automatically as needed. When it does, [ ] is displayed on the screen. MENU > [Rec] > [iHDR] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) Recording Mode: You can easily set the blurriness of the background while checking the screen. 1 2 Press the rear dial to display the setting screen. • Each time the rear dial is pressed in Intelligent Auto Plus Mode, the camera switches between brightness setting operation (P82), Defocus Control operation, and normal operation.
3. Recording Modes Recording images by changing the brightness or colour tone Recording Mode: This mode enables you to change the brightness and colour tone to your preferred settings from the ones set by the camera. Setting brightness 1 Press the rear dial to display the setting screen. • Each press of the rear dial switches among brightness setting, Defocus Control (P81) and 2 Rotate the rear dial to adjust brightness. end operation.
3. Recording Modes About Intelligent Auto Plus Mode and Intelligent Auto Mode ∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode 1 Press [MENU/SET]. 2 3 4 Press 2. Press 3/4 to select the [ ] or [ ] tab. Press 2/1 to select [ ] or [ ] and then press [MENU/SET]. • If [DISP.] is pressed, the description of the selected mode will be displayed. It is also possible to display the selection screen by touching the Recording Mode icon in recording screen.
3. Recording Modes ∫ Menus that can be set Only the following menus can be set. Intelligent Auto Plus Mode Menu Item [Rec] [Photo Style]/[Aspect Ratio]/[Picture Size]/[Quality]/[AFS/AFF]/[Burst Rate]/ [Auto Bracket]/[Self Timer]/[iHandheld Night Shot]/[iHDR]/[Time Lapse Shot]/ [Stop Motion Animation]/[Shutter Type]/[Ex. Tele Conv.]/[Color Space]/ [Stabilizer]/[Face Recog.]/[Profile Setup] [Motion Picture] [Photo Style]/[Snap Movie]/[Rec Format]/[Rec Quality]/[AFS/AFF]/[Continuous AF]/[Ex. Tele Conv.
3. Recording Modes Taking Pictures with Your Favourite Settings (Programme AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 2 Set the mode dial to [ ]. Press the shutter button halfway and display the aperture value and shutter speed value on the screen. 3.
3. Recording Modes Programme Shift In Programme AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Programme Shift. You can make the background more blurred by decreasing the aperture value or record a moving subject more dynamically by slowing the shutter speed when taking a picture in Programme AE Mode. 1 2 Press the shutter button halfway and display the aperture value and shutter speed value on the screen.
3. Recording Modes Example of Programme Shift [When the interchangeable lens (H-FS12032) is used] 㸫1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 㸦(Y㸧 2 17 2.8 18 4 19 (A) 5.6 20 8 21 11 22 16 23 22 4 2 1 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000 1/4000 1/8000 1/16000 (B) (A): Aperture value (B): Shutter speed 1 Programme Shift line chart Represents the aperture and shutter speed set automatically by the camera at each exposure value.
3. Recording Modes Taking Pictures by Specifying the Aperture/ Shutter Speed Recording Mode: • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check on the recording screen, please use [Preview]. (P93) • The brightness of the screen and the recorded pictures may differ. Check the pictures on the playback screen.
3. Recording Modes Shutter-Priority AE Mode When you set the shutter speed, the camera automatically optimises the aperture value for the brightness of the subject. When you want to take a sharp picture of a fast moving subject, set with a faster shutter speed. When you want to create a trail effect, set to a slower shutter speed. 1 2 Set the mode dial to [ ]. Rotate the rear dial to set the shutter speed.
3. Recording Modes Manual Exposure Mode Determine the exposure by manually setting the aperture value and the shutter speed. The Manual Exposure Assistance appears on the lower portion of the screen to indicate the exposure. 1 2 Set the mode dial to [ ]. A Rotate the rear dial to set the aperture value and shutter speed. A B C D Exposure meter Aperture value Shutter speed Manual Exposure Assistance SS F 8 15 30 4.0 5.6 5.
3. Recording Modes Optimising the ISO sensitivity for the shutter speed and aperture value When the ISO sensitivity is set to [AUTO], the camera sets the ISO sensitivity automatically so that the exposure will be appropriate for the shutter speed and aperture value. • Depending on recording conditions, an appropriate exposure may not be set or the ISO sensitivity may become higher. Manual Exposure Assistance 0 −3 0 The exposure is adequate. +3 Set to faster shutter speed or larger aperture value.
3. Recording Modes Checking/not checking the effects of aperture and shutter speed on the recording screen MENU > [Custom] > [Constant Preview] > [ON]/[OFF] • This function does not work when using the flash. • It can only be used with Manual Exposure Mode. • Rotate the rear dial to display the Exposure Meter. Unsuitable areas of the range are displayed in red. • If the exposure is not adequate, the aperture value and the shutter speed turn red and blink when the shutter button is pressed halfway.
3. Recording Modes Confirm the Effects of Aperture and Shutter Speed (Preview Mode) Applicable modes: The effects of aperture and shutter speed can be checked by using the Preview Mode. • Confirm the effects of aperture: You can check the depth of field (effective focus range) before taking a picture by closing the leaf shutter to the aperture value you set. • Confirm the effects of shutter speed: Movement can be confirmed by displaying the actual picture that will be taken with that shutter speed.
3. Recording Modes Easily set aperture/shutter speed for suitable exposure (One Push AE) Applicable modes: When the exposure setting is too bright or too dark, you can use one push AE to achieve a suitable exposure setting. How to tell if the exposure is not adequate • If the aperture values and shutter speed blink red A when the shutter button is pressed halfway. • If the Manual Exposure Assistance is anything other than 3.5 16000 when in Manual Exposure mode.
3. Recording Modes Taking panorama pictures (Panorama Shot Mode) Recording Mode: Consecutive photos taken while the camera is moved are combined to form a panorama. 1 Set the mode dial to [ ]. • After the screen that asks you to check the recording direction is displayed, the horizontal/vertical guidelines will be displayed. Changing the recording direction 1 Select the menu. MENU > [Rec] > [Panorama Direction] 2 Press 3/4 to select the recording direction, and then press [MENU/SET].
3. Recording Modes 4 Press the shutter button once again to end the picture recording. • Recording can also be ended by keeping the camera still while recording. • Recording can also be ended by moving the camera to the end of the guide. ∫ Technique for Panorama Shot Mode A Move the camera in the recording direction without shaking it. If the camera shakes too much, pictures may not be able to be recorded, or the recorded panorama picture may become narrower (smaller).
3. Recording Modes ∫ About playback Pressing 3 will start scrolling playback automatically in the same direction as the recording. • The following operations can be performed during scrolling 1/98 playback. 3 Start panorama playback/Pause¢ 4 Stop ¢ When the playback is paused, you can scroll forwards and backwards by dragging the screen. When the scroll bar is touched, the playback position jumps to the touched position.
3. Recording Modes Taking Pictures that match the Scene being recorded (Scene Guide Mode) Recording Mode: If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, colour, and focus, allowing you to record in a manner appropriate to the scene. 1 2 Set the mode dial to [ ]. Press 2/1 to select the scene. • The scene can also be selected by dragging an example image or the slide bar. 3 Press [MENU/SET] to set.
3. Recording Modes ∫ Switching the scene selection screen display Press [DISP.] to switch the monitor screen. • When it is set to the guide display, tips for creating picture effects suitable for each scene, etc. is displayed. Normal display Guide display List display Displaying/not displaying the selection screen when the mode dial is switched to / . MENU > [Custom] > [Menu Guide] [ON]: Displays the selection screen for the Scene Guide or the Creative Control Mode.
3. Recording Modes For details on “Scene Guide Mode” settings, refer to P98. [Clear Portrait] The brightness of the face is adjusted and the background is defocused to create a clear portrait. Tips • If you are using a lens with the zoom function, you can enhance the effect by zooming in as much as possible and closing the distance between the camera and the subject. [Silky Skin] Brighter face and softer skin colour creates a healthy younger look.
3. Recording Modes [Relaxing Tone] The warm colour tone creates an image with a relaxing mood. [Sweet Child's Face] Moderate background defocusing and skin tone highlighted draws attention to the child’s face. Touch the face. • A still picture is recorded with the focus and exposure set for the touched location. Tips • If you are using a lens with the zoom function, you can enhance the effect by zooming in as much as possible and closing the distance between the camera and the subject.
3. Recording Modes [Romantic Sunset Glow] The enhanced purple tone creates a romantic image of the sky just after sunset. [Vivid Sunset Glow] Red is enhanced to create a vivid image of the sunset. [Glistening Water] The glisten of the water is enhanced to look brighter and slightly bluish. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping.
3. Recording Modes [Cool Night Sky] Blue tones are enhanced to create a cool and sophisticated image of the night sky after sunset. Tips • We recommend using a tripod and the self-timer. • The shutter may remain closed after taking the picture. This is due to signal processing and is not a malfunction. • Noise may become visible when you take pictures in dark places. [Warm Glowing Nightscape] The warm colour tone creates a warm image of the nightscape.
3. Recording Modes [Glittering Illuminations] The star filter enhances pinpoints of light. Tips • We recommend using a tripod and the self-timer. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. • The shutter may remain closed after taking the picture. This is due to signal processing and is not a malfunction. • Noise may become visible when you take pictures in dark places.
3. Recording Modes [Soft Image of a Flower] The soft focus creates a diffused image. Tips • We recommend using a tripod and the self-timer. • We recommend that you avoid using the flash when taking close-up pictures. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. • The focus range is different depending on lens used. Refer to “About the focus distance reference mark” on P156 for the focus range.
3. Recording Modes [Cute Dessert] The overall screen brightness is set higher to enhance the cuteness of the dessert. Tips • If you are using a lens with the zoom function, you can enhance the effect by zooming in as much as possible and closing the distance between the camera and the subject. • We recommend using a tripod and the self-timer. • We recommend that you avoid using the flash when taking close-up pictures.
3. Recording Modes Taking Pictures with different image effects (Creative Control Mode) Recording Mode: This mode records with additional image effects. You can set the effects to add by selecting example images and checking them on the screen. 1 2 Set the mode dial to [ ]. Press 3/4 to select the image effects (filters). • The image effect of the selected example image will be applied in a preview display A. • You can also select the image effects (filters) by touching the example images.
3. Recording Modes ∫ Switching the image effect (filter) selection screen display Press [DISP.] to switch the monitor screen. • When the image effect selection screen display is set to the guide display, description of the selected image effect is displayed. Normal display Guide display List display • If you select the [ ] tab on the menu screen, you can select the following menu items: – [Filter Select]: Displays the image effect (filter) selection screen.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) You can easily set the blurriness of the background while checking the screen. 1 Press the rear dial to display the setting screen. • Each press of the rear dial switches among brightness 2 Rotate the rear dial to set. • Pressing [ ] on the blurriness setting screen will setting, Defocus Control and end operation. cancel the setting. SS F 500 250 125 60 30 4.0 5.6 8.
3. Recording Modes For details on “Creative Control Mode” settings, refer to P107. [Expressive] This effect emphasises the colour to make a pop art picture. Items that can be set Freshness Understated colours Pop colours [Retro] This effect gives a faded image. Items that can be set Colour Yellow emphasised Red emphasised [Old Days] This effect adds a bright, soft and nostalgic feel to the overall image.
3. Recording Modes [Low Key] This effect adds a dark and relaxing feel to the overall image and enhances bright parts. Items that can be set Colour Red emphasised Blue emphasised [Sepia] This effect creates a sepia image. Items that can be set Contrast Low contrast High contrast [Monochrome] This effect creates a black and white picture.
3. Recording Modes [Rough Monochrome] This effect creates a black and white picture with granular noise. Items that can be set Grittiness Less gritty Grittier • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. [Silky Monochrome] This effect blurs the overall image to add a soft feel to a black and white picture.
3. Recording Modes [Cross Process] This effect gives your photo a dramatic colour look. Items that can be set Colour Green tone/Blue tone/Yellow tone/Red tone • Select the desired colour tone by rotating the rear dial, and then press [MENU/SET]. [Toy Effect] This effect reduces peripheral brightness to give the impression of a toy camera. Items that can be set Orange emphasised Colour Blue emphasised [Toy Pop] This effect creates a vivid and bright image with the look of a toy camera.
3. Recording Modes [Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama. Items that can be set Freshness Understated colours Pop colours ∫ Setting the type of defocus With [Miniature Effect] you can make the subject stand out by intentionally creating defocused and in-focus portions. You can set the recording orientation (defocus orientation) and the position and size of the in-focus portion. 1 Press [Fn1] to display the setting screen.
3. Recording Modes [Soft Focus] This effect blurs the overall image to produce a soft feel. Items that can be set Extent of defocus Weak defocus Strong defocus • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. [Fantasy] This effect creates a fantastical image in a pale colour tone. Items that can be set Freshness Understated colours Pop colours [Star Filter] This effect transforms pin-points of light into a star effect.
3. Recording Modes [One Point Color] This effect leaves one selected colour to emphasise impressiveness. Items that can be set Amount of colour left Small amount of colour Large amount of colour ∫ Set the colour to leave in Set the colour to leave in by selecting a location on the screen. 1 Press [Fn1] to display the setting screen. • Setting screen can also be displayed by touching in order of [ 2 Select the colour you want to leave by moving the frame with 3/4/2/1.
3. Recording Modes [Sunshine] This effect adds a cast of light to the scene. Items that can be set Colour Yellow tone/Red tone/Blue tone/White tone • Select the colour tone by rotating the rear dial, and then press [MENU/SET]. ∫ Setting the light source You can change the position and size of the light source. 1 2 Press [Fn1] to display the setting screen. • Setting screen can also be displayed by touching in order of [ ] then [ ]. Press 3/4/2/1 to move the centre position of the light source.
3. Recording Modes Recording motion pictures with manually set aperture value/shutter speed (Creative Video Mode) Recording Mode: It is possible to manually change the aperture and shutter speed and record motion pictures. 1 2 Set the mode dial to [ Select the menu. (P57) MENU 3 ]. > [Motion Picture] > [Exposure Mode] Press 3/4 to select [P], [A], [S] or [M], and then press [MENU/SET].
3. Recording Modes Minimising operational sounds during motion picture recording The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. Using touch icons allows silent operation while recording motion pictures. Select the menu. (P57) MENU 1 2 3 > [Motion Picture] > [Silent Operation] > [ON] Start recording. Touch [ ]. Touch icon.
3. Recording Modes Registering your preferred settings (Custom Mode) Recording Mode: You can register the current camera settings as custom settings. If you then record in Custom Mode, you can use the registered settings. • Initial setting of the Programme AE Mode is registered as the custom settings initially. Registering Personal Menu Settings (Registering custom settings) To allow recording using the same settings, up to 3 sets of current camera settings can be registered using [Cust.Set Mem.].
3. Recording Modes Recording using registered custom set You can easily call up the settings you have registered using [Cust.Set Mem.]. Set the mode dial to [ ] • The custom set you used last time ([ ], [ ], or [ ]) will be called up. ∫ To change a custom set 1 2 3 Set the mode dial to [ ]. Press [MENU/SET] to display the menu. Press 2/1 to select the custom setting you want to use, and then press [MENU/SET].
4. Picture Quality and Colour Tone Settings Adjusting the Picture Quality by Adding an Effect ([Photo Style]) Applicable modes: You can select effects to match the type of image you wish to record. It is possible to adjust the items such as colour or picture quality of the effect to your desire. MENU > [Rec] > [Photo Style] [Standard] [Vivid] ¢ Brilliant effect with high saturation and contrast. [Natural]¢ [Monochrome] [Scenery] This is the standard setting. ¢ Soft effect with low contrast.
4. Picture Quality and Colour Tone Settings ∫ Adjusting the picture quality • Picture quality cannot be adjusted in the Intelligent Auto Plus Mode. 1 2 Press 2/1 to select the type of Photo Style. Press 3/4 to select the items, and then press 2/ 1 to adjust. 6WDQGDUG -5 0 +5 ±0 S ±0 ±0 ±0 [r] Increases the difference between the brightness and the darkness in the picture. [s] Decreases the difference between the brightness and the darkness in the picture. [r] The picture is sharply defined.
4. Picture Quality and Colour Tone Settings Recording Images with Image Effects ([Filter Settings]) Applicable modes: You can apply image effects (filters) that are available for Creative Control Mode to images in other modes, such as Aperture-Priority AE Mode or Panorama Shot Mode. MENU > [Rec] > [Filter Settings] > [Filter Select] • You can apply image effects that are available for Creative No Effect Control Mode by performing the same operations as those for Creative Control Mode.
4. Picture Quality and Colour Tone Settings • [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine] are not available in Creative Video Mode. • [Toy Effect]/[Toy Pop]/[Miniature Effect]/[Sunshine] are not available in Panorama Shot Mode. • The image effects of [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter] are not visible on the screen when taking panorama pictures. • Using [High Key] in Panorama Shot Mode may not be effective in dimly-lit conditions.
4. Picture Quality and Colour Tone Settings Adjusting Bright/Dark Portions ([Highlight Shadow]) Applicable modes: You can adjust the brightness of bright and dark portions on an image while checking the brightness on the screen. 1 Select the menu. (P57) MENU 2 [Rec] > [Highlight Shadow] Press 2/1 to select the item. ヤヒ 3 > (Standard) A state with no adjustments is set. (Raise the contrast) Bright areas are brightened, and dark areas are darkened.
4. Picture Quality and Colour Tone Settings Adjusting the White Balance Applicable modes: In sunlight, under incandescent lights or in other such conditions where the colour of white takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest to what is seen by the eye in accordance with the light source. 1 2 Press 1 ( リヴヰ ). Select the White Balance by rotating the rear dial.
4. Picture Quality and Colour Tone Settings [ ] You can set the colour temperature manually 6500K for taking natural pictures in different lighting conditions. The colour of light is measured as a number in degrees Kelvin. As the colour temperature increases, the picture becomes more bluish. As the colour temperature decreases, the picture becomes more reddish. 1 Press 3 2 Press 3/4 to select the colour temperature and then press [MENU/SET]. • You can set a colour temperature from [2500K] to [10000K].
4. Picture Quality and Colour Tone Settings ∫ Auto White Balance Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a colour close to white, Auto White Balance may not function properly. In a case like this, set the White Balance to a mode other than [AWB]. 1 Auto White Balance will work within this range.
4. Picture Quality and Colour Tone Settings White Balance Bracket Bracket setting is performed based on the adjustment values for the White Balance fine adjustment, and 3 pictures with different colours are automatically recorded when the shutter button is pressed once. 1 2 Fine-adjust the White Balance in step 2 of “Finely adjusting the White Balance” and then perform the bracket setting by rotating the rear dial.
4. Picture Quality and Colour Tone Settings Setting the Picture Quality and Size Setting the aspect ratio of pictures Applicable modes: This allows you to select the aspect ratio of the pictures to suit printing or the playback method. MENU > [Rec] > [Aspect Ratio] [4:3] [Aspect Ratio] of a 4:3 TV [3:2] [Aspect Ratio] of a 35 mm film camera [16:9] [Aspect Ratio] of a high-definition TV, etc.
4. Picture Quality and Colour Tone Settings Setting the compression rate of pictures ([Quality]) Applicable modes: Set the compression rate at which the pictures are to be stored. > MENU [Rec] > [Quality] Settings File format [A] JPEG [›] [ ] [ ] [ Description of settings A JPEG image in which image quality was given priority. ] RAWiJPEG RAW A standard image quality JPEG image. This is useful for increasing the number of shots without changing the number of pixels.
4. Picture Quality and Colour Tone Settings Using Image Correction Functions Compensating the contrast and exposure ([i.Dynamic]) Applicable modes: Contrast and exposure are compensated when the brightness difference between the background and subject is great, etc. MENU > [Rec] > [i.Dynamic] Settings: [AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF] • [AUTO] automatically sets the intensity of the effect according to the recording conditions.
4. Picture Quality and Colour Tone Settings Combining pictures with different exposures ([HDR]) Applicable modes: You can combine 3 pictures with different levels of exposure into a single picture with rich gradation. You can minimise the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. An image combined by HDR is recorded in JPEG. MENU > [Rec] > [HDR] [ON] Records HDR pictures. [OFF] Does not record HDR pictures.
4. Picture Quality and Colour Tone Settings Reducing the long shutter noise ([Long Shtr NR]) Applicable modes: The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures. MENU > [Rec] > [Long Shtr NR] Settings: [ON]/[OFF] • [Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for signal processing.
4. Picture Quality and Colour Tone Settings Setting the colour space ([Color Space]) Applicable modes: Set this when you want to correct the colour reproduction of the recorded pictures on a PC, printer etc. MENU > [sRGB] [AdobeRGB] [Rec] > [Color Space] Colour space is set to sRGB colour space. This is widely used in computer related equipment. Colour space is set to AdobeRGB colour space.
5. Focus and Brightness (Exposure) Settings Taking Pictures with Auto Focus By setting the optimum Focus Mode or Auto Focus Mode for the subject or recording condition, you can let the camera automatically adjust focus in various scenes. 1 Set the focus mode dial to [AFS] or [AFC]. • The Focus Mode will be set. (P139) 2 3 Press 2 ( ). リヴヰ Press 2/1 to select AF Mode and then press [MENU/SET]. • The Auto Focus Mode will be set. (P141) 4 A Press the shutter button halfway.
5. Focus and Brightness (Exposure) Settings • If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case, re-adjust the focus. • When the Focus Mode is set to [AFF] or [AFC]. – A beep will be emitted when focus is first achieved during the pressing halfway. – When AF Mode is set to [ ], the first AF area at which focus is achieved may be displayed momentarily while pressing halfway.
5. Focus and Brightness (Exposure) Settings Selecting the Focus Mode (AFS/AFF/AFC) Applicable modes: The method for achieving focus when the shutter button is pressed halfway is set. Set the focus mode dial to [AFS] or [AFC]. Item The movement of the subject and the scene (recommended) Description of settings [AFS] Subject is still (Auto (Scenery, anniversary Focus photograph, etc.) Single) “AFS” is an abbreviation of “Auto Focus Single”.
5. Focus and Brightness (Exposure) Settings ∫ About [AFS] of the focus mode dial In [AFS/AFF] in the [Rec] menu or the [Motion Picture] menu, you can assign [AFS] or [AFF] to [AFS] of the focus mode dial. When recording using [AFF], [AFC] • It may take time to focus on the subject when you operate the zoom from Wide to Tele or suddenly change the subject from a distant one to a nearby one. • Press the shutter button halfway again when it is difficult to focus on the subject.
5. Focus and Brightness (Exposure) Settings Selecting the Auto Focus Mode Applicable modes: This allows the focusing method that suits the positions and number of the subjects to be selected. 1 2 Press 2 ( ). リヴヰ Press 2/1 to select AF Mode and then press [MENU/SET]. ([Face/Eye Detection]) ([Tracking]) [ ] ([23-Area]) The camera automatically detects the person’s face and eyes. An eye closer to the camera will be in focus, while the exposure will be optimised for the face.
5. Focus and Brightness (Exposure) Settings ([1-Area]) ([Pinpoint]) The camera focuses on the subject in the AF area on the centre of the screen. • Position and size of the AF area can be changed. (P146) You can achieve a more precise focus on a point that is smaller than [Ø]. If you press the shutter button halfway, the screen that lets you check the focus will be enlarged. • The focus position can be set on an enlarged screen.
5. Focus and Brightness (Exposure) Settings ([Tracking]) •[ ] cannot be used with [Time Lapse Shot]. • In the following cases, [ ] operates as [Ø].
5. Focus and Brightness (Exposure) Settings Locking the subject to be tracked ( [Tracking]) Button operation Aim the AF tracking frame over the subject, and press the shutter button halfway. A AF tracking frame • AF area will turn green when the camera detects the subject. • The AF area turns yellow when the shutter button is released. • Lock is cancelled when [MENU/SET] is pressed. A Touch operation Touch the subject. • Perform the operation after cancelling the touch shutter function.
5. Focus and Brightness (Exposure) Settings Setting up position of the AF area/changing size of the AF area Applicable modes: When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area. • Perform the operation after cancelling the touch shutter function. • When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to [AF].
5. Focus and Brightness (Exposure) Settings When selecting [š], [Ø] Position and size of the AF area can be changed. 1 2 Press 2 ( ). Select [š] or [Ø] and press 4. • AF area setting screen is displayed. • You can also display the AF area setting screen by touching the screen. 3 Change the position and size of the AF area. Button operation Touch operation Touching 3/4/2/1 s Description of operation Moves the AF area. Pinching in/out Enlarges/reduces the AF area in small steps. s [DISP.
5. Focus and Brightness (Exposure) Settings When selecting [ ] You can set the focus position precisely by enlarging the screen. • The focus position cannot be set at the edge of the screen. 1 2 3 Press 2 ( ). Select [ ] and press 4. Press 3/4/2/1 to set the focus position and then press [MENU/SET]. • The assist screen for setting the focus position is displayed in an enlarged size. • The assist screen can also be displayed by touching the 4 subject. Move [+] to the position to be in focus.
5. Focus and Brightness (Exposure) Settings Setting the AF area position with the Touch Pad Applicable modes: By setting [Touch Pad AF] in [Touch Settings] (P54) in the [Custom] menu, you can move the AF area displayed on the viewfinder by touching the monitor. MENU > [Custom] > [Touch Settings] > [Touch Pad AF] [EXACT] Moves the AF area of the Viewfinder by touching a desired position on the Touch Pad.
5. Focus and Brightness (Exposure) Settings Optimising the focus and brightness for a touched position Applicable modes: By setting [Touch AF] (P54) in [Touch Settings] of the [Custom] menu to [AF+AE], you can optimise the focus and brightness for the position you have touched. 1 Select the menu. (P57) MENU 2 3 > [Custom] > [Touch Settings] > [Touch AF] Press 3/4 to select [AF+AE], and press [MENU/SET]. Touch the subject you want to optimise the brightness for. • AF area setting screen is displayed.
5. Focus and Brightness (Exposure) Settings • When recording with the Touch Shutter, the focus and brightness are optimised for the touched position before recording takes place. • At the edge of the screen, the metering may be affected by the brightness around the touched location. Not available in these cases: • [AF+AE], which optimises the focus and brightness, does not work in the following cases.
5. Focus and Brightness (Exposure) Settings Turning on/not turning on the AF Assist Lamp MENU > [Custom] > [AF Assist Lamp] > [ON]/[OFF] AF assist lamp will illuminate the subject when the shutter button is pressed halfway, making it easier for the camera to focus when recording in low light conditions. (Larger AF area is displayed depending on the recording conditions.) • The effective range of the AF Assist Lamp is different depending on the lens used.
5. Focus and Brightness (Exposure) Settings Recording/not recording even when focus is not achieved MENU > [Custom] > [Focus/Release Priority] [FOCUS]: You cannot take a picture until the subject is brought into focus. [RELEASE]: This gives priority to the best time to take a picture so you can take a picture when the shutter button is pressed fully. • When set to [RELEASE], please be aware that focus may not be achieved even with focus mode set to [AFS], [AFF] or [AFC].
5. Focus and Brightness (Exposure) Settings Taking Pictures with Manual Focus Applicable modes: Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate Auto Focus. The operations used to focus manually differ depending on the lens.
5. Focus and Brightness (Exposure) Settings • You can also enlarge the area by rotating the focus ring, moving the focus lever, or pinching out (P53) the screen or touching the screen twice. • You can also determine the area to be enlarged by dragging (P53) the screen. • If you press [DISP.], the area to be enlarged will be reset to the centre. 4 B Adjust the focus. A Indicator for ¶ (infinity) B MF Assist (enlarged screen) C Peaking D MF Guide • The in-focus portions will be highlighted.
5. Focus and Brightness (Exposure) Settings 5 Press the shutter button halfway. • The assist screen will close. The recording screen will be displayed. • You can also close the assist screen by pressing [MENU/SET]. • If you have enlarged the picture by rotating the focus ring or moving the focus lever, the assist screen will close approximately 10 seconds after the operation.
5. Focus and Brightness (Exposure) Settings ∫ About the focus distance reference mark The focus distance reference mark is a mark used to measure the focus distance. Use this when taking pictures with Manual Focus or taking close-up pictures. Focus range A Focus distance reference mark B Focus distance reference line C 0.2 m (0.66 feet) (focal length 12 mm to 20 mm) [When the interchangeable lens (H-FS12032) is used] D 0.3 m (0.
5. Focus and Brightness (Exposure) Settings Setting the display method of the MF Assist (enlarged screen) > MENU [Custom] > [MF Assist] • Available settings vary depending on the lens used. When an interchangeable lens with no focus ring (H-FS12032) is used [ON] Focus can be adjusted when you press 2( area to be enlarged is displayed. ) and the screen that lets you set the [OFF] Focus can be adjusted when you press 2( to be enlarged is not displayed. ).
5. Focus and Brightness (Exposure) Settings Highlighting/not highlighting in-focus portions MENU > [Custom]>[Peaking] [ON] In-focus portions are highlighted with colour. [OFF] In-focus portions are not highlighted. The detection level for in-focus portions is set. When [HIGH] is set, portions to be highlighted are [Detect Level] reduced, allowing you to achieve a more precise focus. [HIGH]/[LOW] • The detection level setting does not affect the focus range.
5. Focus and Brightness (Exposure) Settings Fixing the Focus and the Exposure (AF/AE Lock) Applicable modes: This is useful when you want to take a picture of a subject outside the AF area or the contrast is too strong and you cannot achieve appropriate exposure. 1 Set a function button to [AF/AE LOCK]. (P64) • [AF/AE LOCK] can only be assigned to [Fn1] or [Fn2]. • The following step is an example in which [AF/AE LOCK] is assigned to [Fn1]. 2 3 Align the screen with the subject.
5. Focus and Brightness (Exposure) Settings • AF Lock only is effective when taking pictures in Manual Exposure Mode. • AE Lock only is effective when taking pictures with Manual Focus. • Only the AF lock is active during motion picture recording. Once you cancel the AF lock during the recording, the AF lock cannot be reactivated. • The subject can be focused again by pressing the shutter button halfway even when AE is locked. • Programme Shift can be set even when AE is locked.
5. Focus and Brightness (Exposure) Settings Compensating the Exposure Applicable modes: Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. 1 Press the rear dial to switch to Exposure Compensation operation. • Exposure Compensation value turns yellow, indicating that the exposure can now be compensated. 2 Rotate the rear dial to compensate the exposure. A Exposure Compensation value.
5. Focus and Brightness (Exposure) Settings Setting the Light Sensitivity Applicable modes: This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. 1 2 3 Press 3 ( ). リヴヰ Select the ISO sensitivity by rotating the rear dial. Press the rear dial to set. AUTO ISO AUTO AUTO 200 400 The ISO sensitivity is automatically adjusted according to the brightness.
5. Focus and Brightness (Exposure) Settings Characteristics of the ISO sensitivity 200 Recording location (recommended) When it is light (outdoors) 25600 When it is dark Shutter speed Slow Fast Noise Less Increased Increased Less Jitter of the subject • For the focus range of flash when [AUTO] is set, refer to P205. •[ ] is not available in Shutter-Priority AE Mode and Manual Exposure Mode.
5. Focus and Brightness (Exposure) Settings Setting the step increment of ISO sensitivity Applicable modes: You can adjust the ISO sensitivity settings for every 1/3 EV. MENU > [1/3 EV] [1 EV] [Rec] > [ISO Increments] [L.100]¢/[L.125]¢/[L.160]¢/[200]/[250]/[320]/[400]/[500]/[640]/[800]/[1000]/[1250]/ [1600]/[2000]/[2500]/[3200]/[4000]/[5000]/[6400]/[8000]/[10000]/[12800]/[16000]/ [20000]/[25600] [L.100]¢/[200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[25600] ¢ Only available when [Extended ISO] is set.
5. Focus and Brightness (Exposure) Settings Selecting the Method for Measuring Brightness ([Metering Mode]) Applicable modes: Type of optical measurement to measure brightness can be changed. MENU > [Rec] > [Metering Mode] [ ] (Multiple) This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method.
6. Shutter and Drive Settings Setting the Shutter Type Applicable modes: You can take pictures using either of the two shutter methods: the Electronic Front Curtain method or the electronic shutter method. Electronic Front Curtain The camera starts an exposure electronically, and ends it with the mechanical shutter. Description Electronic Shutter The camera starts and ends an exposure electronically. Flash ± — Shutter Speed (Sec.
6. Shutter and Drive Settings • When [ ] is displayed on the screen, pictures will be taken with the electronic shutter. • When [Burst Rate] is set to [SH], pictures will be taken with the electronic shutter. • When [Silent Mode] is set to [ON], pictures will be taken with the electronic shutter.
6. Shutter and Drive Settings Select a Drive Mode Applicable modes: You can change what the camera will do when you press the shutter button. 1 2 Press 4 ( ). リヴヰ Press 2/1 to select the drive mode, and then press [MENU/SET]. 1 2 3 4 H 31/3 A Drive mode A 1 [Single] When the shutter button is pressed, only one picture is recorded. 2 [Burst] (P169) Recordings are made in succession while the shutter button is pressed.
6. Shutter and Drive Settings Taking Pictures using Burst Mode Applicable modes: Pictures are taken continuously while the shutter button is pressed. • Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P231). 1 2 3 Press 4 ( ). Press 2/1 to select the burst icon ([ etc.), and then press 3. ], H 31/3 Select the burst speed with 2/1, and then press [MENU/SET].
6. Shutter and Drive Settings • The burst speed may become slower depending on the following settings. – [Picture Size] (P131)/[Quality] (P132)/[Sensitivity] (P162)/Focus Mode (P139)/[Focus/ Release Priority] (P152) • Burst speed can also be set with [Burst Rate] in the [Rec] menu. • Refer to P132 for information about RAW files. 4 Focus on the subject and take a picture. 50 i 4:3 L AFS H • Hold down the shutter button fully to activate the Burst Mode.
6. Shutter and Drive Settings • When a high ambient temperature, continuous recording or other conditions cause the camera to overheat, the following restrictions will occur to protect the camera. Wait until the camera cools down. – Continuous recording, motion picture recording, and the Wi-Fi connection will be temporarily disabled. – If you continue recording even when [ ] is flashing on the screen, a message will be displayed and the camera will turn off automatically.
6. Shutter and Drive Settings Taking Pictures using Auto Bracket Applicable modes: Maximum of 7 pictures will be recorded with different exposure settings following the Exposure Compensation range every time the shutter button is pressed. With Auto Bracket [Step]: [3•1/3], [Sequence]: [0/s/r] 1 2 3 4 1st picture 2nd picture 3rd picture d0 EV j1/3 EV i1/3 EV Press 4 ( ). Press to 2/1 to select the Auto Bracket icon ([ 3 1/3 ], etc.), and then press 3.
6. Shutter and Drive Settings ∫ Cancelling the Auto Bracket Select [ ] ([Single]) or [ ] from among the drive modes. (P168) ∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto Bracket 1 Select the menu. (P57) MENU 2 3 > [Rec] > [Auto Bracket] Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then press [MENU/SET]. Press 3/4 to select the setting and then press [MENU/SET].
6. Shutter and Drive Settings • When taking pictures using Auto Bracket after setting the Exposure Compensation value, the pictures taken are based on the selected Exposure Compensation value. Not available in these cases: • Auto Bracket is disabled in the following cases.
6. Shutter and Drive Settings Taking Pictures with the Self-timer Applicable modes: 1 2 3 Press 4 ( ). Press 2/1 to select the self-timer icon ([ 10 ], etc.), and then press 3. Press 2/1 to select the time setting for the self-timer, and then press [MENU/SET]. H 31/3 10 10 2 Picture is taken 10 seconds after shutter is pressed. After 10 seconds the camera takes 3 pictures at about 2 seconds intervals. Picture is taken 2 seconds after shutter is pressed. • When using a tripod, etc.
6. Shutter and Drive Settings 4 Press the shutter button halfway to focus and then press it fully to take the picture. • Focus and exposure will be set when the shutter button is pressed halfway. • After the self-timer indicator flashes, recording starts. ∫ Cancelling the self-timer Select [ ] ([Single]) or [ ] from among the drive modes. (P168) • It is also possible to cancel by turning off this unit.
7. Functions Customised for Various Subjects and Purposes Taking Pictures Automatically at Set Intervals ([Time Lapse Shot]) Applicable modes: If you set the start time of recording, the recording interval and the number of pictures, the camera can automatically take pictures of subjects such as animals or plants as time elapses and create a motion picture. • Set the date and time settings in advance. (P36) • Pictures taken with Time Lapse Shot are displayed as a set of group pictures.
7. Functions Customised for Various Subjects and Purposes • Set the recording interval D so that it will be longer than the exposure time (shutter speed) E. (The figure below) Recording may be skipped when the recording interval D is shorter than the exposure time (shutter speed) E, for example during night-time recording. A:First B:Second C:Third 3 4 5 Press 3/4 to select [Start] and then press [MENU/SET]. Press the shutter button fully. • The recording starts automatically.
7. Functions Customised for Various Subjects and Purposes • This function is not for use in a security camera. • If you leave the unit somewhere to perform [Time Lapse Shot], please be careful of theft. • Recording for long periods in cold places such as ski resorts or places at high altitude, or in warm, wet environments may cause a malfunction, so please be careful. • Recording may not be consistent with the set recording interval or the set number of pictures depending on recording conditions.
7. Functions Customised for Various Subjects and Purposes Creating Stop Motion Pictures ([Stop Motion Animation]) Applicable modes: A stop motion picture is created by splicing pictures together. • Set the date and time settings in advance. (P36) • Pictures taken with [Stop Motion Animation] are displayed as a set of group pictures.
7. Functions Customised for Various Subjects and Purposes 2 Press 3/4 to select the recording method, and then press [MENU/SET]. [Auto Shooting] [Shooting Interval] 3 4 5 6 [ON] Takes pictures automatically at a set recording interval. When the shutter button is pressed fully, recording starts. [OFF] This is for taking pictures manually, frame by frame. (Only when [Auto Shooting] is set to [ON]) Sets the interval for automatic recording.
7. Functions Customised for Various Subjects and Purposes 8 Select the methods for creating a motion picture. • The recording format is set to [MP4]. [Rec Quality] Sets the quality of a motion picture. [FHD/50p]/[FHD/25p]/[HD/25p]/[VGA/25p] [Frame Rate] Sets the number of frames per second. The larger the number is, the smoother the motion picture will be. [50fps]¢/[25fps]/[12.5fps]/[8.3fps]/[6.25fps]/[5fps]/[2.
7. Functions Customised for Various Subjects and Purposes • Automatic recording may not take place at set intervals because recording takes time under certain recording conditions, such as when the flash is used for recording. • When a picture quality different from the aspect ratio of the original pictures is selected, black strips will be displayed on the top and bottom or the left and right of the motion picture.
7. Functions Customised for Various Subjects and Purposes Making Multiple Exposures on One Picture ([Multi Exp.]) Applicable modes: Gives an effect like multi exposure. (up to 4 times equivalent per a single image) 1 Select the menu. (P57) MENU > [Rec] > [Multi Exp.] 2 Press 3/4 to select [Start] and then press [MENU/ SET]. 3 Decide on the composition, and take the first picture. • After taking the picture, press the shutter button halfway 1H[W down to take the next picture.
7. Functions Customised for Various Subjects and Purposes ∫ About Automatic Gain Control setting Select [Auto Gain] on the screen shown in step 2 and set it. • [ON]: The brightness level is adjusted according to the number of pictures taken and the pictures are superimposed over each other. • [OFF]: Compensate the exposure to match the subject so that all the superimposed exposure effects will be just right.
7. Functions Customised for Various Subjects and Purposes Disabling Operational Sounds and the Output of Light at once ([Silent Mode]) Applicable modes: This function is useful for recording images in a quiet environment, public facility, etc. or recording images of subjects such as babies or animals. Select the menu. (P57) MENU > [Custom] > [Silent Mode] Settings: [ON]/[OFF] • Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled. The following settings are fixed.
7. Functions Customised for Various Subjects and Purposes Taking Clear Pictures by Registering Faces ([Face Recog.]) Applicable modes: Face Recognition is a function which finds a face resembling a registered face and prioritises focus and exposure automatically. Even if the person is located towards the back or on the end of a line in a group photo, the camera can still take a clear picture. KEN KEN Select the menu. (P57) MENU > [Rec] > [Face Recog.] Settings: [ON]/[OFF]/[MEMORY] • [Face Recog.
7. Functions Customised for Various Subjects and Purposes • [Face Recog.] only works when the AF Mode is set to [š]. • During the Burst Mode, [Face Recog.] picture information can be attached to only the first picture. • When group pictures are played back, the name of the first picture of the set is displayed. • Face Recognition may take more time to select and recognise distinctive facial features than regular Face/Eye Detection.
7. Functions Customised for Various Subjects and Purposes Face Settings You can register information such as names and birthdays for face images of up to 6 people. ∫ Point of recording when registering the face images • Face front with eyes open and mouth closed, making (Good example for registering) sure the outline of the face, the eyes, or the eyebrows are not covered with hair when registering. • Make sure there is no extreme shading on the face when registering.
7. Functions Customised for Various Subjects and Purposes 4 Set the item. • You can register up to 3 face images. It is possible to register names. [Name] 1 Press 4 to select [SET] and then press [MENU/SET]. 2 Enter the name. • For details on how to enter characters, refer to “Entering Text” section on P74. It is possible to register the birthday. [Age] 1 Press 4 to select [SET] and then press [MENU/SET].
7. Functions Customised for Various Subjects and Purposes Change or delete the information for a registered person You can modify the pictures or information of an already registered person. You can also delete the information of the registered person. 1 2 3 Press 4 to select [MEMORY] and press [MENU/SET]. Press 3/4/2/1 to select the face image to edit or delete and then press [MENU/SET]. Press 3/4 to select the item and then press [MENU/SET].
7. Functions Customised for Various Subjects and Purposes Recording Profiles of Babies and Pets on Images Applicable modes: If you set the name and birthday of your baby or pet in advance, you can record their name and age in months and years in the images. You can display these at playback or stamp the recorded images using [Text Stamp] (P242). JOE LUCKY ∫ Setting [Age] or [Name] 1 Select the menu.
7. Functions Customised for Various Subjects and Purposes Using screens and displays suitable for recording Checking areas that may be white saturated ([Zebra Pattern]) Applicable modes: You can check areas that may be white saturated by displaying areas above a certain luminance level in a zebra pattern. You can also set the minimum luminance level (brightness) to be processed as a zebra pattern.
7. Functions Customised for Various Subjects and Purposes Displaying the recording screen in black and white ([Monochrome Live View]) Applicable modes: You can display the recording screen in black and white. This function is convenient when a black and white screen will make it easier to set focus with Manual Focus. MENU > [Custom] > [Monochrome Live View] Settings: [ON]/[OFF] • Recorded images will not be affected.
8. Stabiliser, Zoom and Flash Optical Image Stabiliser Applicable modes: The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter. A lens which supports the stabiliser function is required. • The interchangeable lens (H-FS12032/H-FS35100) supports the Optical Image Stabiliser function. • The interchangeable lens (H-X015) does not support the Optical Image Stabiliser function. • When using an optional interchangeable lens with an O.I.S.
8. Stabiliser, Zoom and Flash Preventing jitter (camera shake) When the jitter alert [ ] appears, use [Stabilizer], a tripod or the self-timer (P175). • Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. – Slow Sync. – Slow Sync.
8. Stabiliser, Zoom and Flash Taking Pictures with the Zoom Optical zoom Applicable modes: You can zoom-in to make people and objects appear closer or zoom-out to record landscapes, etc. T side: Enlarges distant subject W side: Widens angle of view Interchangeable lens with a zoom ring (H-FS12032/ H-FS35100) Interchangeable lens that supports the power zoom (electrically operated zoom) Interchangeable lens that does not support the zoom (H-X015) Rotate the zoom ring. T W Move the zoom lever.
8. Stabiliser, Zoom and Flash Raising the telescopic effect [Ex. Tele Conv.] Applicable modes: The Extra Tele Conversion enables you to take pictures that are further enlarged without deteriorating the picture quality. When taking pictures [Ex. Tele Conv.] ([Rec]) 1.2k: [ 1.4k: [ 2.0k: [ • Set the picture size to [M]or [S] (picture sizes indicated with M] ([16:9]) M] ([4:3]/[3:2]/[1:1]) S] ([4:3]/[3:2]/[16:9]/[1:1]) ), and set the quality to [A] or [›]. When recording motion pictures [Ex. Tele Conv.
8. Stabiliser, Zoom and Flash ∫ Increasing the zoom magnification in steps • This can be used only when recording pictures. 1 Select the menu. (P57) > MENU 2 3 4 [Rec] > [Ex. Tele Conv.] > [ZOOM] Set a function button to [Zoom Control]. (P64) • The following step is an example in which [Zoom Control] is assigned to [Fn1]. Press [Fn1]. Press 2/1 or 3/4.
8. Stabiliser, Zoom and Flash • When the Extra Tele Conversion is used, angle of view for still pictures will be different from the angle of view for motion pictures because the zoom factor is different between them. Angle of view for recording can be checked beforehand by matching the [Rec Area] (P215) setting to the mode you wish to record in.
8. Stabiliser, Zoom and Flash Changing the settings for a power zoom lens Applicable modes: Sets the screen display and lens operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom). This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom). • The interchangeable lenses (H-FS12032/H-FS35100/H-X015) are not compatible with power zoom. (For compatible lenses, please refer to our website.
8. Stabiliser, Zoom and Flash Zooming using touch operations You can perform zoom operations by touching. (Touch zoom) (Optical Zoom and Extra Tele Conversion for still picture recording are operable) • If you are using an interchangeable lens not supporting power zoom (H-FS12032/H-FS35100/ H-X015), you can only operate the Extra Tele Conversion for pictures by setting [Ex. Tele Conv.] (P198) to [ZOOM]. 1 2 Touch [ ]. Touch [ ]. • The slide bar is displayed.
8. Stabiliser, Zoom and Flash Taking Pictures with the Flash (Supplied) Applicable modes: To take pictures with the camera using a flash, attach an external flash. Please note that this section provides instructions based on the flash (supplied). • For information on other external flashes, refer to P324. ∫ Removing the Hot Shoe Cover The camera comes with a hot shoe cover attached to the hot shoe.
8. Stabiliser, Zoom and Flash Forcing the flash off ([Œ]) In situations where pictures cannot be taken with the flash, such as when the flash (supplied) is turned off or when you are recording a motion picture, [Œ] (forced flash off) is displayed on the recording screen and the flash does not fire. In the following cases, the flash is fixed to [Œ] (forced flash off).
8. Stabiliser, Zoom and Flash ∫ The available flash range (approximation) When you use certain lenses, light from the flash may be blocked or fail to cover the lens field of view, causing dark areas to appear in the resulting pictures. The distance at which light from the flash is blocked by lens, and the distance to which light from the flash is delivered vary depending on the lens used. Check the distance to the subject when taking a picture.
8. Stabiliser, Zoom and Flash Setting the Flash Functions • [Flash] in the [Rec] menu is available only when an external flash is attached. Changing the firing mode Applicable modes: Select whether to set the flash output automatically or manually. 1 Select the menu. (P57) MENU 2 > [Rec] > [Flash] > [Firing Mode] Press 3/4 to select the item and then press [MENU/SET]. [TTL] [MANUAL] The camera automatically sets the flash output. Set the luminosity ratio of the flash manually.
8. Stabiliser, Zoom and Flash Changing Flash Mode Applicable modes: Set the flash to match the recording. 1 Select the menu. (P57) 2 Press 3/4 to select the item and then press [MENU/SET]. MENU ‰ > [Rec] > [Flash] > [Flash Mode] The flash is activated every time regardless of the recording conditions. ([Forced Flash On]) • Use this when your subject is back-lit ([Forced On/ or under fluorescent light.
8. Stabiliser, Zoom and Flash ∫ Available flash settings by Recording Mode [When the flash (supplied) is attached] The available flash settings depend on the Recording Mode.
8. Stabiliser, Zoom and Flash ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) ‰ Flash setting Shutter speed (Sec.) 1/50th¢1 1 to 1/16000th Œ 60¢2 to 1/16000th ¢1 In Shutter Priority AE Mode, the shutter speed can be set to a value between 60 seconds and 1/50th of a second; in Manual Exposure Mode, it can be set to T (Time) or a value between 60 seconds and 1/50th of a second. ¢2 The setting changes to T (Time) in Manual Exposure Mode.
8. Stabiliser, Zoom and Flash Adjust the flash output Applicable modes: Adjust the flash brightness when pictures taken with the flash are over or underexposed. 1 Select the menu. (P57) MENU 2 > [Rec] > [Flash] > [Flash Adjust.] Press 2/1 to set the flash output and then press [MENU/SET]. • You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV. • Select [n0] to return to the original flash output. • [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
8. Stabiliser, Zoom and Flash Taking Pictures with Wireless Flashes Applicable modes: By using flashes that support wireless recording (DMW-FL360L/DMW-FL580L: optional), you can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. • Although the flash (supplied) cannot be used as a wireless flash, if you attach it to the hot shoe of the camera, you can control the firing of wireless flashes.
8. Stabiliser, Zoom and Flash Preparations: Attach the flash (supplied) or a flash (DMW-FL360L/DMW-FL580L: optional) to the camera. 1 Set the wireless flashes to RC Mode and then place them. • Set a channel and groups for the wireless flash. 2 Select the menu. (P57) MENU 3 > [Rec] > [Flash] > [Wireless] Press 3/4 to select [ON] and then press [MENU/SET]. • When [Wireless] is set to [ON], [WL] is displayed on the flash icon on the recording screen.
8. Stabiliser, Zoom and Flash [Firing Mode] [External Flash] [TTL]: The camera automatically sets the output. [AUTO]:¢ Flash output is set by the external flash. [MANUAL]: Set the luminosity ratio of the external flash manually. [OFF]: The flash on the camera side emits only communication light. [Flash Adjust.] Set the output of the external flash manually when [Firing Mode] is set to [TTL]. [Manual Flash Adjust.
9. Recording Motion Pictures Recording Motion Picture Applicable modes: This camera can record full high definition motion pictures compatible with the AVCHD format or motion pictures recorded in MP4. Audio will be recorded in stereo. The functions available when recording motion pictures differ according to the lens you are using, and the operational sound of the lens may be recorded. Refer to the website for compatible lenses. 1 Start recording by pressing the motion picture button.
9. Recording Motion Pictures Enabling/disabling the motion picture button MENU > [Custom] > [Video Button] > [ON]/[OFF] • This function is for preventing accidental operation of the button. Switching between the angle of view for taking pictures and the one for recording motion pictures MENU > [Custom] > [Rec Area] > [!] (Picture)/[ ] (Motion picture) • When the aspect ratio setting is different in still and motion pictures, the angle of view changes at the start of motion picture recording.
9. Recording Motion Pictures • When a high ambient temperature, continuous recording or other conditions cause the camera to overheat, the following restrictions will occur to protect the camera. Wait until the camera cools down. – Continuous recording, motion picture recording, and the Wi-Fi connection will be temporarily disabled. – If you continue recording even when [ ] is flashing on the screen, a message will be displayed and the camera will turn off automatically.
9. Recording Motion Pictures Setting the format, size and recording frame rate Applicable modes: 1 Select the menu. (P57) MENU 2 > [Motion Picture] > [Rec Format] Press 3/4 to select the item and then press [MENU/SET]. This data format is suitable for when playing back on a high-definition TV, etc. [AVCHD] [MP4] 3 4 This data format is suitable for when playing back on a PC, etc. Press 3/4 to select [Rec Quality] and then press [MENU/SET]. Press 3/4 to select the item and then press [MENU/SET].
9. Recording Motion Pictures When [MP4] is selected Item Size Recording frame rate Sensor output Bit rate [FHD/28M/50p] 1920k1080 50p 50 frames/second 28 Mbps [FHD/20M/25p] 1920k1080 [HD/10M/25p] 1280k720 [VGA/4M/25p] 640k480 20 Mbps 25p 25 frames/second 10 Mbps 4 Mbps • What is bit rate This is the volume of data for a definite period of time, and the quality becomes higher when the number gets bigger. This unit is using the “VBR” recording method.
9. Recording Motion Pictures How to set focus when recording a motion picture ([Continuous AF]) Applicable modes: Focusing changes depending on the Focus Mode setting (P139) and the [Continuous AF] setting in the [Motion Picture] menu. Focus mode [AFS]/[AFF]/ [AFC] [MF] [Continuous AF] Description of settings [ON] The camera automatically keeps focusing on subjects during recording. [OFF] The camera maintains the focus position at the start of recording. [ON]/[OFF] You can focus manually.
9. Recording Motion Pictures Recording still pictures while recording motion pictures Applicable modes: Still pictures can be recorded even while recording a motion picture. (Simultaneous recording) During motion picture recording, press the shutter button fully to record a still picture. • Simultaneous recording indicator is displayed while recording still pictures. • Recording with the Touch Shutter function (P55) is also 13 available.
9. Recording Motion Pictures Recording Snap Movies Applicable modes: You can specify the recording time in advance and record motion pictures casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. • Motion pictures will be recorded with [FHD/20M/25p] in [MP4]. • Using the smartphone/tablet app “Panasonic Image App”, you can combine motion pictures recorded with the camera.
9. Recording Motion Pictures 7 A Start recording by pressing the motion picture button. SNAP 4SEC 3s A Elapsed recording time B Set recording time • Release the motion picture button right after you press it. • You cannot stop motion picture recording in the middle.The recording will stop automatically when the set recording time has elapsed. 4s B ∫ To deactivate Snap Movie Select [OFF] in step 2.
9. Recording Motion Pictures Setting up [Pull Focus] Set the frames that determine a focus start (first) position and focus end (second) position. The camera then measures its distance to the subjects and sets focus. When you start motion picture recording, focus shifts from the first frame to the second frame. Button operation 1 Press 2. 2 Press 3/4/2/1 to move the AF area frame, and press [MENU/SET]. (First position) • If you press [DISP.] before pressing [MENU/SET], the frame will return to the centre.
9. Recording Motion Pictures Using the [Motion Picture] Menu For details on [Motion Picture] menu settings, refer to P57. • [Photo Style], [Filter Settings], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution] and [Digital Zoom] are common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu. • [Motion Picture] menu is not displayed in the following cases.
9. Recording Motion Pictures [Silent Operation] • Refer to P119 for details. [Mic Level Disp.] Applicable modes: Set whether or not the mic levels are displayed on the screen. Settings: [ON]/[OFF] Not available in these cases: • This function is not available in the following case: – [Miniature Effect] (Creative Control Mode) [Mic Level Adj.] Applicable modes: Adjust the sound input level to 4 different levels.
10. Playing Back and Editing Images Playing Back Pictures 1 Press [(]. 2 Press 2/1. 1/98 2: Play back the previous picture 1: Play back the next picture • If you press and hold 2/1, you can play back the pictures in succession. • It is also possible to forward or rewind the image by dragging the screen horizontally (P53). • You can forward or rewind pictures continuously by keeping your finger on the left or right sides of the screen after forwarding/rewinding a picture.
10. Playing Back and Editing Images Playing Back Motion Pictures This unit was designed to play motion pictures using the AVCHD, MP4 and QuickTime Motion JPEG formats. • Motion pictures are displayed with the motion picture icon A ([ ]). Press 3 to play back. 12s A Motion picture recording time • After playback starts, the elapsed playback time is displayed on the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s]. • Some information (recording information, etc.
10. Playing Back and Editing Images ∫ Operations during automatic Snap Movie playback 3 Playback from the beginning 2 Back to previous picture 1 Ahead to next picture • If you touch the screen, automatic playback will stop. • To play back the motion pictures recorded by this unit on a PC, use the “PHOTOfunSTUDIO” software on the DVD (supplied). Creating Still Pictures from a Motion Picture You can create a single still picture from a recorded motion picture.
10. Playing Back and Editing Images Switching the Playback Method Using the Playback Zoom Rotate the rear dial right. A 1k 2k 4k 8k 16k • If the rear dial is rotated to the left after the image is enlarged, 2.0X the magnification will be reduced. • You can also enlarge/reduce the image by pinching out/ pinching in (P53) on the part you want to enlarge/reduce. • When you change the magnification, the zoom position indication A appears for about 1 second.
10. Playing Back and Editing Images Displaying multiple screens (Multi Playback) Rotate the rear dial left. 1/98 1 screen 12 screens 30 screens Calendar screen display • If the rear dial is rotated to the right, the previous playback screen will be displayed. • It is possible to switch the playback screen by touching the following icons. –[ ]: 1 screen –[ ]: 12 screens –[ ]: 30 screens – [ CAL ]: Calendar screen display • The screen can be switched gradually by dragging the screen up or down.
10. Playing Back and Editing Images Playing Back Group Pictures A picture group consists of multiple pictures. You can play back pictures in a group either continuously or one by one. • You can edit or delete all pictures in a group at once. (For example, if you delete a picture group, all pictures in the group are deleted.) [ ]: A picture group consisting of pictures taken in the Burst Mode with the burst speed [SH]. (P169) [ ]: A picture group consisting of pictures taken in a Time Lapse Shot.
10. Playing Back and Editing Images Playing back each Group Pictures 1 2 3 Press 4. • The same operation can be performed by touching [ SUB MENU 1/98 ]. SLF Press 3/4 to select [Display In Group], and then press [MENU/SET]. SUB MENU Press 2/1 to flip through images. SUB ] and selecting [Exit Display In Group] will return you to • Pressing 4 again or touching [ MENU the normal playback screen. • Each picture in a group can be treated same as normal pictures when they are played back.
10. Playing Back and Editing Images Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures that are not in the DCF standard or those that are protected cannot be deleted. To delete a single picture 1 In Playback Mode, select the picture to delete and then press [ ]. • The same operation can be performed by touching [ 2 ]. Press 3 to select [Delete Single] and then press [MENU/SET]. 'HOHWH 6LQJOH • Confirmation screen is displayed.
10. Playing Back and Editing Images To delete multiple pictures (up to 100¢) or all the pictures ¢ Picture groups are treated as a single picture. (All the pictures in the selected picture group will be deleted.) 1 2 In Playback Mode, press [ ]. Press 3/4 to select [Delete Multi] or [Delete All] and then press [MENU/SET]. • [Delete All] > Confirmation screen is displayed. Pictures are deleted by selecting [Yes].
10. Playing Back and Editing Images Using the [Playback] Menu With this menu, you can use various playback functions such as cropping and other editing of recorded images, protect settings, etc. • With [Clear Retouch], [Text Stamp], [Time Lapse Video], [Stop Motion Video], [Resize] or [Cropping], a new edited picture is created. A new picture cannot be created if there is no free space on the card so we recommend checking that there is free space before editing the picture.
10. Playing Back and Editing Images ∫ Operations during a slideshow Button Touch operation operation Description of operation Button Touch operation operation Description of operation 3 Play/Pause 4 Exit slide show 2 Back to previous picture 1 Ahead to next picture Reduce volume level Increase volume level • Normal playback resumes after the slide show finishes.
10. Playing Back and Editing Images [Playback Mode] Playback in [Normal Play], [Picture Only], [Video Only], [3D Play], [Category Play] or [Favorite Play] can be selected. 1 Select the menu. (P57) MENU 2 > [Playback] > [Playback Mode] Select the group to play back by pressing 3/4, and then press [MENU/SET]. • Refer to P306 for the method to play back [3D Play] pictures in 3D. When [Category Play] is selected in above step 2 Press 3/4/2/1 to select the category and then press [MENU/SET] to set.
10. Playing Back and Editing Images [Location Logging] You can write location information sent from a smartphone (latitude and longitude) on images. • You can send location information and write it on images using a smartphone. (P268) • You need to install “Panasonic Image App” on your smartphone. (P261) • Read the [Help] in the “Image App” menu for further details on how to operate. Preparation: Sending location information to the camera from the smartphone. 1 Select the menu.
10. Playing Back and Editing Images [Clear Retouch] You can erase unnecessary parts recorded on the pictures taken. • The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. 1 Select the menu. (P57) MENU 2 3 > [Playback] > [Clear Retouch] Press 2/1 to select a picture, and then press [MENU/SET]. Drag your finger over the part you want to delete. • The parts to be erased are coloured.
10. Playing Back and Editing Images • Pictures may appear unnatural because the background of deleted parts is artificially created. • For group pictures, perform [Clear Retouch] on each picture. (They cannot be edited at once.) • When [Clear Retouch] is performed on group pictures, they are saved as new pictures separate from the original ones. Not available in these cases: • Not available when the viewfinder is in use.
10. Playing Back and Editing Images [Title Edit] You can add text (comments) to pictures. After text has been registered, it can be stamped in prints using [Text Stamp] (P242). 1 Select the menu. (P57) MENU 2 > [Playback] > [Title Edit] > [Single]/[Multi] Select the picture. • [’] is displayed for pictures with titles already registered. [Single] setting 1 Press 2/1 to select the picture. 2 Press [MENU/SET].
10. Playing Back and Editing Images [Text Stamp] You can stamp the recording date/time, name, location, travel date or title onto the recorded pictures. LISA 1 Select the menu. (P57) MENU 2 > [Playback] > [Text Stamp] > [Single]/[Multi] Select the picture. • [‘] appears on screen if the picture is stamped with text. [Single] setting 1 Press 2/1 to select the picture. 2 Press [MENU/SET]. 6HW [Multi] setting 1 Press 3/4/2/1 to select the picture and then press [MENU/SET] (repeat).
10. Playing Back and Editing Images 4 5 Press 3/4 to select text stamp items, and then press [MENU/SET]. Press 3/4 to select the settings, and then press [MENU/SET]. [Shooting Date] [W/O TIME]: Stamp the year, month and date. [WITH TIME]: Stamp the year, month, day, hour and minutes. [OFF] [ ] ([Face Recognition]): [Name] [ Name registered in [Face Recog.] will be stamped. ] ([Baby/Pet]): Name registered in [Profile Setup] will be stamped.
10. Playing Back and Editing Images • When you print pictures stamped with text, the date will be printed over the stamped text if you specify printing of the date at the photo shop or on the printer. • You can set up to 100 pictures at one time in [Multi]. • The picture quality may deteriorate when text stamping is carried out. • Depending on the printer being used, some characters may be cut at printing. Check before printing.
10. Playing Back and Editing Images [Video Divide] Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need. Dividing a motion picture is permanent. Decide before you divide! 1 Select the menu. (P57) MENU 2 3 > [Playback] > [Video Divide] Press 2/1 to select the motion picture to divide, and then press [MENU/SET]. Press 3 at the location to divide.
10. Playing Back and Editing Images [Time Lapse Video] This function allows you to create a motion picture from a picture group recorded with [Time Lapse Shot]. The created motion picture is saved in MP4 recording format. 1 Select the menu. (P57) MENU 2 3 > [Playback] > [Time Lapse Video] Select the [Time Lapse Shot] picture group with 2/1, and then press [MENU/ SET]. Create a motion picture by selecting the methods for creating it.
10. Playing Back and Editing Images [Resize] To allow easy posting to web pages, attachment to e-mail etc., picture size (number of pixels) is reduced. 1 Select the menu. (P57) MENU 2 > [Playback] > [Resize] > [Single]/[Multi] Select the picture and size. [Single] setting 1 Press 2/1 to select the picture, and then press [MENU/SET]. 2 Press 3/4 to select the size, and then press [MENU/SET]. • Confirmation screen is displayed. It is executed when 4:3 L 16 4:3 M 8 4:3 S 4 6HW [Yes] is selected.
10. Playing Back and Editing Images • You can set up to 100 pictures at one time in [Multi]. • The picture quality of the resized picture will deteriorate.
10. Playing Back and Editing Images [Cropping] You can enlarge and then clip the important part of the recorded picture. 1 Select the menu. (P57) MENU 2 3 > [Playback] > [Cropping] Press 2/1 to select the picture, and then press [MENU/SET]. Use the rear dial and press 3/4/2/1 to select the parts to be cropped. Rear dial (right): Enlargement Rear dial (left): Reduction 3/4/2/1: Move • You can also touch [ 4 ]/[ ] to enlarge/reduce. • You can also move by dragging on the screen. Press [MENU/SET].
10. Playing Back and Editing Images [Rotate]/[Rotate Disp.] This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps. [Rotate] (The picture is rotated manually) • The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF]. 1 Select the menu. (P57) MENU 2 3 > [Playback] > [Rotate] Press 2/1 to select the picture and then press [MENU/SET].
10. Playing Back and Editing Images [Favorite] You can do the following if a mark has been added to pictures and they have been set as favourites. • Play back the pictures set as favourites only as a slide show. • Play back only the pictures set as favourites. ([Favorite Play]) • Delete all the pictures not set as favourites. ([All Delete Except Favorite]) 1 Select the menu. (P57) MENU 2 > [Playback] > [Favorite] > [Single]/[Multi] Select the picture.
10. Playing Back and Editing Images [Print Set] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you set [Print Set] for a group pictures, the print setting for the number of prints will be applied to every picture in the group.
10. Playing Back and Editing Images ∫ Cancelling all the [Print Set] settings Select the menu. (P57) MENU > [Playback] > [Print Set] > [Cancel] • Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed. ∫ To print the date After setting the number of prints, set/cancel printing with the recording date by pressing 1. • Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date.
10. Playing Back and Editing Images [Protect] You can set protection for pictures you do not want to delete by mistake. 1 Select the menu. (P57) MENU 2 > [Playback] > [Protect] > [Single]/[Multi] Select the picture. [Single] setting Press 2/1 to select the picture, and then press [MENU/SET]. • The setting is cancelled when [MENU/SET] is pressed again. • Exit the menu after it is set. 6HW &DQFHO [Multi] setting Press 3/4/2/1 to select the pictures and then press [MENU/SET] (repeat).
10. Playing Back and Editing Images [Face Rec Edit] You can clear and replace all information relating to face recognition in selected images. 1 Select the menu. (P57) MENU 2 3 4 > [Playback] > [Face Rec Edit] > [REPLACE]/[DELETE] Press 2/1 to select the picture and then press [MENU/SET]. Press 2/1 to select the person and then press [MENU/SET]. (When [REPLACE] is selected) Press 3/4/2/1 to select the person to replace and then press [MENU/SET]. • Confirmation screen is displayed.
10. Playing Back and Editing Images [Delete Confirmation] This sets which option, [Yes] or [No], will be highlighted first when the confirmation screen for deleting a picture is displayed. Yes 1 Select the menu. (P57) 2 Press 3/4 to select an item and then press [MENU/SET]. MENU > No [Playback] > [Delete Confirmation] [“Yes” first] [Yes] is highlighted first, so deletion can be done quickly. [“No” first] [No] is highlighted first. Accidental deletion of pictures is avoided.
11. Using the Wi-Fi function Wi-FiR function ∫ Use the camera as a wireless LAN device When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device.
11. Using the Wi-Fi function ∫ About the Wi-Fi connection lamp Lit blue: The Wi-Fi connection is on standby Blinking blue: Sending/receiving data through the Wi-Fi connection ∫ About the [Wi-Fi] button [Wi-Fi]/[Fn1] button can be used in two ways, as [Wi-Fi] or as [Fn1] (function 1). At the time of purchase, it is initially set to [Wi-Fi]. • Refer to P64 for details about the function button.
11. Using the Wi-Fi function ∫ Describing method When “select [Select a destination from History]”, etc. is described in a step, perform any of the following operations. Button operation: Touch operation: Select [Select a destination from History] with the cursor button, and then press [MENU/SET]. Touch [Select a destination from History]. • The camera cannot be used to connect to a public wireless LAN connection. • Use a IEEE802.11b, IEEE802.11g or IEEE802.
11.
11. Using the Wi-Fi function Controlling with a Smartphone/Tablet Using a smartphone, you can record images on the camera and save them. You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on your smartphone. Installing the smartphone/tablet app “Image App” The “Image App” is an application provided by Panasonic. • OS App for AndroidTM: Android 2.3.3 or higher¢ App for iOS: iOS 6.0 or higher (Please note that the iPhone 3GS is not supported.
11. Using the Wi-Fi function Connecting to a smartphone/tablet By pressing and holding [Wi-Fi], you can easily establish a connection. Preparations • Install the “Image App” in advance. (P261) 1 Press and hold [Wi-Fi] on the camera. • The information required for connecting the smartphone to this unit (QR code, SSID and password) is displayed. ヸㄊノョㄊ • If you press [MENU/SET] on the camera, the QR code ョㄏヒ will be enlarged. When it is difficult to scan the QR code, try enlarging it.
11. Using the Wi-Fi function If you are using an iOS device When scanning the QR code to set up a connection (If you are reconnecting the camera, steps 1 to 5 are not required) 1 Start “Image App”. (P261) 2 Select [QR code], and then select [OK]. 3 Using “Image App”, scan the QR code displayed on the screen of the camera. • If you press [MENU/SET] on the camera, the QR code will be enlarged. When it is difficult to scan the QR code, try enlarging it. 4 Install the profile of “IMAGE APP”.
11. Using the Wi-Fi function When using an SSID and password to set up a connection 1 Turn on the Wi-Fi function in the setting menu of the smartphone. 2 Select the SSID displayed on the screen of the camera. Wi-Fi 0123456789ABC 3 Enter the password displayed on the screen of the camera. (Only when connecting for the first time) 4 Start “Image App”. (P261) If you are using an Android device When scanning the QR code to set up a connection 1 Start “Image App”. (P261) 2 Select [QR code].
11. Using the Wi-Fi function ∫ Changing the connection method To change the connection method, press [DISP.], and then select the connection method. When connecting with [Via Network]: On the camera 1 Select [Via Network]. • Follow the connection procedure described on P295 to connect the camera to a wireless access point. On your smartphone 2 3 4 Turn on the Wi-Fi function. Connect the smartphone to the wireless access point to which the camera is connected. Start “Image App”.
11. Using the Wi-Fi function Taking images via a smartphone/tablet (remote recording) 1 2 Connect to a smartphone. (P262) Operate the smartphone. 1 Select [ ]. 2 Record an image. • The recorded images are saved in the camera. • Some settings are not available. • When a high ambient temperature, continuous recording or other conditions cause the camera to overheat, the following restrictions will occur to protect the camera. Wait until the camera cools down.
11. Using the Wi-Fi function Playing back images in the camera 1 2 Connect to a smartphone. (P262) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch the image to enlarge it. Saving images stored in the camera 1 2 Connect to a smartphone. (P262) Operate the smartphone. 1 Select [ ].
11. Using the Wi-Fi function Sending images in the camera to an SNS 1 2 Connect to a smartphone. (P262) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch and hold an image, and drag it to send it to an SNS, etc. • The image is sent to a web service such as an SNS.
11. Using the Wi-Fi function ∫ Operate the smartphone 1 2 3 Select [ ]. Select [Geotagging]. Select an icon. Start recording location information. Finish recording the location information. Sending and writing location information. • Follow the on-screen messages to operate the smartphone. • Location information is not written onto the images recorded when [Rec Format] is set to [AVCHD]. • When the card in the camera lacks sufficient free space, writing location information may not be possible.
11. Using the Wi-Fi function Combining motion pictures recorded with Snap Movie according to your preference on a smartphone/tablet Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap Movie] function (P221). Music can be added to motion pictures to be combined. In addition, you can save the combined motion picture or upload it on a web service. A Web service 1 2 3 4 Record motion pictures with [Snap Movie]. Send the recorded motion pictures.
11. Using the Wi-Fi function Sending images to a smartphone/tablet by controlling the camera ∫ Methods for sending and images that can be sent JPEG RAW MP4 AVCHD 3D Sending an image each time a recording is made ([Send Images While Recording]) ± — — — — Select and send the images ([Send Images Stored in the Camera]) ± — ± — — • Some images may not be played back or sent depending on the device.
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. Wi-Fi > [New Connection] > [Send Images While Recording] > [Smartphone] 2 Select [Via Network] or [Direct], and connect. (P294) On your smartphone When connecting with [Via Network]: 1 Turn on the Wi-Fi function. 2 Select the wireless access point you want to connect to, and set. 3 Start “Image App”.
11. Using the Wi-Fi function Select and send the images ([Send Images Stored in the Camera]) 1 Select the menu. Wi-Fi > [New Connection] > [Send Images Stored in the Camera] > [Smartphone] 2 Select [Via Network] or [Direct], and connect. (P294) On your smartphone When connecting with [Via Network]: 1 Turn on the Wi-Fi function. 2 Select the wireless access point you want to connect to, and set. 3 Start “Image App”.
11. Using the Wi-Fi function Displaying pictures on a TV You can display pictures on a TV that supports the Digital Media Renderer (DMR) function of the DLNA standard. Preparations Set the TV to DLNA waiting mode. • Read the operating instructions for your TV. 1 Select the menu. Wi-Fi 2 3 4 > [New Connection] > [Playback on TV] Select [Via Network] or [Direct], and connect. (P294) Select a device you want to connect. • When the connection is established, the screen is displayed.
11. Using the Wi-Fi function Printing Wirelessly You can send images to a compatible printer, and print them wirelessly. ∫ Methods for sending and images that can be sent Select and send the images ([Send Images Stored in the Camera]) JPEG RAW MP4 AVCHD 3D ± — — — — • Some images may not be sent depending on the device. • For details on how to send images, refer to P300. Preparations • You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)¢ printer.
11. Using the Wi-Fi function When sending images to AV device You can send pictures and motion pictures to AV devices in your house (home AV devices).
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. Wi-Fi 2 3 4 5 > [New Connection] > [Send Images While Recording] > [AV device] Select [Via Network] or [Direct], and connect. (P294) Select a device you want to connect. Check the send settings, and select [Set]. • To change the send setting, press [DISP.]. (P302) Take pictures. • To change the setting or disconnect, press [Wi-Fi].
11. Using the Wi-Fi function When sending images to PC You can send pictures and motion pictures recorded with this unit to a PC. ∫ Methods for sending and images that can be sent JPEG RAW MP4 AVCHD¢ 3D Sending an image each time a recording is made ([Send Images While Recording]) ± ± — — ± Select and send the images ([Send Images Stored in the Camera]) ± ± ± ± ± ¢ A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller.
11. Using the Wi-Fi function To create a folder that receives images • Create a PC user account [account name (up to 254 characters) and password (up to 32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. ∫ When using “PHOTOfunSTUDIO” 1 Install “PHOTOfunSTUDIO” to the PC. • For details on hardware requirements and installation, read “About the supplied software” 2 (P313).
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. Wi-Fi > [New Connection] > [Send Images While Recording] > [PC] 2 3 Select [Via Network] or [Direct], and connect. (P294) Select the PC you want to connect to. • When the PC you want to connect to is not displayed, select [Manual Input], and enter the 4 5 Select the folder you want to send. Check the send settings, and select [Set].
11. Using the Wi-Fi function Select and send the images ([Send Images Stored in the Camera]) 1 Select the menu. Wi-Fi > [New Connection] > [Send Images Stored in the Camera] > [PC] 2 3 Select [Via Network] or [Direct], and connect. (P294) Select the PC you want to connect to. • When the PC you want to connect to is not displayed, select [Manual Input], and enter the 4 5 Select the folder you want to send. Check the send settings, and select [Set]. • To change the send setting, press [DISP.].
11. Using the Wi-Fi function Using Web services You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”. By setting up automatic transfers of pictures and motion pictures to the Cloud Sync Service, you can receive the transferred pictures or motion pictures on a PC or smartphone. LUMIX CLUB A Wireless access point B Web service C Cloud Sync Service Preparations To send images to a web service or a cloud folder, you need to register to “LUMIX CLUB” (P289).
11. Using the Wi-Fi function When sending images to web service ∫ Methods for sending and images that can be sent JPEG RAW MP4 AVCHD 3D Sending an image each time a recording is made ([Send Images While Recording]) ± — — — ± Select and send the images ([Send Images Stored in the Camera]) ± — ± — ± • Some images may not be played back or sent depending on the device. • For information on the playback of images, check the web service. • For details on how to send images, refer to P300.
11. Using the Wi-Fi function Registering web services When sending images to web services, the web service being used must be registered with the “LUMIX CLUB”. (P289) • Check the “FAQ/Contact us” on the following site for compatible web services. http://lumixclub.panasonic.net/eng/c/lumix_faqs/ Preparation: Make sure that you have created an account on the web service you want to use, and have the login information available. 1 2 3 4 Connect to the “LUMIX CLUB” site using a smartphone or computer.
11. Using the Wi-Fi function Select and send the images ([Send Images Stored in the Camera]) 1 Select the menu. Wi-Fi > [New Connection] > [Send Images Stored in the Camera] > [Web service] 2 3 4 5 Select [Via Network], and connect. (P295) Select a web service. Check the send settings, and select [Set]. • To change the send setting, press [DISP.]. (P302) Select [Single Select] or [Multi Select]. [Single Select] setting 1 Select the picture. 2 Select [Set].
11. Using the Wi-Fi function ∫ Sending images in the camera to a web service with simple operations Once you send an image, you can send other images to a web service with simple, smartphone-like operations in an environment where a wireless access point connection is available. (The instructions below assume that you are already registered to “LUMIX CLUB” and the camera has a record of a connection to a wireless access point.) 1 2 Display an image. Press 4.
11. Using the Wi-Fi function When sending images to [Cloud Sync. Service] ∫ Using [Cloud Sync. Service] (As of September 2014) Preparations You need to register to “LUMIX CLUB” (P289) and configure the Cloud Sync. setting to send a picture to a Cloud Folder. For a PC, use “PHOTOfunSTUDIO” to set up Cloud Sync settings. For a smartphone, use “Image App” to set them up. • If you set the picture destination to [Cloud Sync.
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. Wi-Fi > [New Connection] > [Send Images While Recording] > [Cloud Sync. Service] 2 3 4 Select [Via Network], and connect. (P295) Check the send settings, and select [Set]. • To change the send setting, press [DISP.]. (P302) Take pictures. • To change the setting or disconnect, press [Wi-Fi]. (P258) You cannot change the settings while sending pictures.
11. Using the Wi-Fi function Registering to the “LUMIX CLUB” About the [LUMIX CLUB] Acquire a “LUMIX CLUB” login ID (free). If you register this unit to the “LUMIX CLUB”, you can synchronise images between the devices you are using, or transfer these images to web services. Use the “LUMIX CLUB” when uploading pictures to web services. • You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (P292) Refer to the “LUMIX CLUB” site for details. http://lumixclub.panasonic.
11. Using the Wi-Fi function 5 Read through the “LUMIX CLUB” terms of use and select [Agree]. • You can switch pages by 3/4. • You can enlarge (2k) the display by rotating the rear dial to the right. • You can reset the enlarged display to its original size (1k) by rotating the rear dial to the left. 6 7 • You can move the position of the enlarged display with 3/4/2/1. • Press [ ] to cancel the process without acquiring a login ID. Enter a password.
11. Using the Wi-Fi function Using the acquired login ID/Checking or changing the login ID or password ([Set Login ID]) Preparation: When using the acquired login ID, check the ID and password. To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” website from your smartphone or PC and change the “LUMIX CLUB” password in advance. • The login ID and password registered to the “LUMIX CLUB” cannot be changed on this unit. 1 Select the menu.
11. Using the Wi-Fi function To set the same login ID for the camera and the smartphone/tablet • Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or web services. When either this unit or the smartphone/tablet has acquired the login ID: 1 2 Connect this unit to the smartphone. (P262) From the “Image App” menu, set the common login ID. • The login IDs for this unit and the smartphone become the same.
11. Using the Wi-Fi function Delete your login ID and account from the “LUMIX CLUB” Delete the login ID from the camera when transferring it to another party or disposing of it. You can also delete your “LUMIX CLUB” account. 1 Select the menu. (P57) MENU 2 3 4 5 > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [LUMIX CLUB] Select [Delete account]. • The message is displayed. Select [Next]. Select [Yes] in the login ID delete confirmation screen. • The message is displayed. Select [Next].
11. Using the Wi-Fi function About Connections You can select a connection method after selecting a Wi-Fi function and a destination. Performing a direct connection is convenient for when you are in a place away from home where wireless access points are not available or for when connecting temporarily to a device you do not usually use.
11. Using the Wi-Fi function Connecting from your house (via the network) You can select the method for connecting to a wireless access point. ¢ WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the manual of the wireless access point.
11. Using the Wi-Fi function If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted. • When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using. 1 Select the wireless access point you are connecting to. • Pressing [DISP.] will search for a wireless access point again.
11. Using the Wi-Fi function • Check the wireless access points instruction manual and settings when saving a wireless access point. • If no connection can be established, the wireless access point’s radio waves may be too weak. Refer to “Message Display” (P331) and “Troubleshooting” (P344) for details. • Transmission speed may decrease, or may not be usable depending on the environment it is used in.
11. Using the Wi-Fi function Connecting quickly with the same settings as the previous ones ([Select a destination from History]/[Select a destination from Favorite]) When the Wi-Fi function is used, a record is saved in the history. You can register records as favourites. Connecting from the history or favourites allows you to easily connect with the same settings as the previous ones. 1 Press [Wi-Fi]. ヸㄊノョㄊ ョㄏヒ 2 3 Select [Select a destination from History] or [Select a destination from Favorite].
11. Using the Wi-Fi function Editing the items registered to favourites 1 2 3 4 Press [Wi-Fi]. Select [Select a destination from Favorite]. Select the favourite item you want to edit, and then press 1. Select the item. [Remove from Favorite] [Change the Order in Favorite] [Change the Registered Name] — Select the destination. • For details on how to enter characters, refer to “Entering Text” section on P74. • A maximum of 30 characters can be entered. A two-byte character is treated as two characters.
11. Using the Wi-Fi function About settings for sending images When sending images, select the method for sending them after selecting [New Connection]. After the connection has been completed, settings for sending, such as the image size for sending, can also be changed. ∫ Images that can be sent Destination JPEG RAW MP4¢1 AVCHD¢1, 2 3D [Smartphone] ± — ± — — [PC] ± ± ± ± ± [Cloud Sync.
11. Using the Wi-Fi function Send Images While Recording A picture can be automatically sent to a specified device every time you take it. • Since the camera gives priority to recording, sending may take longer during the recording. • When connected with [Send Images While Recording], [ ] is displayed on the recording screen, and [ ] is displayed while sending a file. • If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will not be resent.
11. Using the Wi-Fi function Changing the settings for sending images Pressing [DISP.] after completing a connection allows you to change the settings for sending such as the image size for sending. [Size] Resize the image to send. [Original]/[Auto]¢1/[Change] • If you select [Auto], the image size is determined by the circumstances at the destination. • You can select the image size for [Change] from [M], [S] or [VGA]. The aspect ratio does not change.
11. Using the Wi-Fi function [Wi-Fi Setup] Menu Configure the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Select the menu. (P57) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set [LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID. • Refer to P289 for details. [PC Connection] You can set the workgroup. To send images to a PC, a connection to the same workgroup as the destination PC is required.
11. Using the Wi-Fi function [Wi-Fi Password] To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Delete] • For details on how to enter characters, refer to “Entering Text” section on P74.
12. Connecting to other equipment Enjoying 3D pictures Taking 3D pictures Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to take 3D pictures for extra impact. To view 3D pictures, a television that supports 3D is required. 1 2 Attach the 3D interchangeable lens to the camera. Bring the subject into the frame and record by pressing the shutter button fully. • Focusing is not required when recording 3D pictures.
12. Connecting to other equipment Playing back 3D pictures Connecting the camera to a 3D compatible television and playing back pictures taken in 3D allows you to enjoy 3D pictures for extra impact. It is also possible to play back the recorded 3D pictures by inserting an SD card into the 3D compatible television with an SD card slot. Preparations: Set the [HDMI Mode] to [AUTO], [1080p] or [1080i]. (P70) Set the [3D Playback] to [ ].
12.
12. Connecting to other equipment Playing Back Pictures on a TV Screen Pictures recorded with this unit can be played back on a TV screen. Preparations: Turn this unit and the TV off. • Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 HDMI socket Video socket High quality Connect the camera and a TV. • Check the direction of the terminals and plug in/out straight holding onto the plug.
12. Connecting to other equipment To connect with an AV cable (optional) • Always use a genuine Panasonic AV cable (DMW-AVC1: optional). • Check the [TV Aspect]. (P70) • Audio will be played back in monaural. • The viewfinder cannot be displayed when connected with a AV cable. A B C D 2 3 HDMI micro cable HDMI socket AV cable (optional) Yellow: to the video input socket E White: to the audio input socket F Align the marks, and insert. G Check the terminal.
12. Connecting to other equipment The recorded pictures can be played back on a TV with an SD Memory Card slot • Depending on the TV model, pictures may not be displayed on the full screen. • The file format of the motion pictures that can be played back differs depending on the TV model. • In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of panorama pictures may not work. • For cards compatible with playback, refer to the operating instructions of the TV.
12. Connecting to other equipment ∫ Other linked operations Turning this unit off: If you use the remote control for the TV to turn the TV off, this unit is also turned off. Automatic input switching: • If you connect with an HDMI micro cable and then turn this unit on, and then press [(], the input channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
12. Connecting to other equipment Saving still pictures and motion pictures on your PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. • If the computer being used does not support SDXC Memory Cards, a message prompting you to format may appear. (Doing so will cause recorded images to be erased so do not choose to format.
12. Connecting to other equipment About the supplied software The supplied DVD includes the following software. Install the software on to your computer before use. • PHOTOfunSTUDIO 9.6 PE (Windows Vista/Windows 7/Windows 8/Windows 8.1) This software allows you to manage images. For example, you can send pictures and motion pictures to a PC and sort them by recording date or model name.
12. Connecting to other equipment ∫ Installing supplied software • Before inserting the DVD, close all running applications. 1 2 Check the environment of your PC. • Operating environment of “PHOTOfunSTUDIO” – OS: Windows VistaR (32bit) SP2, WindowsR 7 (32bit/64bit) or SP1, WindowsR 8 (32bit/64bit), WindowsR 8.1 (32bit/64bit) – CPU: PentiumR III 800 MHz or higher (Windows VistaR), PentiumR III 1 GHz or higher (WindowsR 7/WindowsR 8/WindowsR 8.
12. Connecting to other equipment ∫ Transferring images to a PC Preparations: Install “PHOTOfunSTUDIO ” to the PC. 1 Connect the computer and camera with the USB connection cable (supplied). • Please turn this unit on and your PC before connecting. • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) Do not connect devices to incorrect terminals.
12. Connecting to other equipment ∫ Copying to a PC without using “PHOTOfunSTUDIO ” If you are not able to install “PHOTOfunSTUDIO”, you can copy files and folders to your PC by dragging and dropping files from this unit. • The content (folder structure) on the card of this unit is as follows. For Windows: A drive ([LUMIX]) is displayed in [Computer] For Mac: A drive ([LUMIX]) is displayed on the desktop • Card DCIM 100_PANA P1000001.JPG P1000002.JPG P1000999.
12. Connecting to other equipment Saving still pictures and motion pictures on a Recorder If you insert card holding content recorded with this unit into a Panasonic recorder, you can dub the content to a Blu-ray Disc or DVD etc. Methods to export still pictures and motion pictures to other devices will vary depending on the file format. (JPEG, RAW, MPO, AVCHD, or MP4). • See the operating instructions for the recorder about the details about copying and playing back.
12. Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s monitor. • Group pictures will not be displayed as group pictures but as single pictures. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer.
12. Connecting to other equipment • Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable. • Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed.
12. Connecting to other equipment Selecting a single picture and printing it 1 Press 2/1 to select the picture and then press [MENU/SET]. PictBridge PictBridge 0XOWL 3ULQW 3ULQW 2 Press 3 to select [Print start] and then press [MENU/SET]. • Refer to P321 for the items that can be set before starting to print the pictures. • Disconnect the USB connection cable after printing. Selecting multiple pictures and printing them 1 2 Press 3. Press 3/4 to select an item and then press [MENU/SET].
12. Connecting to other equipment Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures on a paper size or a layout which is not supported by the camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.
12. Connecting to other equipment ∫ [Paper Size] { Settings on the printer are prioritised. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] [16:9] 100 mmk148 mm 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm • Paper sizes not supported by the printer will not be displayed.
12. Connecting to other equipment ∫ Layout printing When printing a picture several times on 1 sheet of paper. For example, if you want to print the same picture 4 times on 1 sheet of paper, set [Page Layout] to [ä] and then set [Num.of prints] to 4 for the picture that you want to print. When printing different pictures on 1 sheet of paper. For example, if you want to print 4 different pictures on 1 sheet of paper, set [Page Layout] to [ä] and then set [Num.of prints] to 1 for each of the 4 pictures.
13. Others Optional accessories • Some optional accessories may not be available in some countries. External Flash (optional) Optional flashes (DMW-FL360L/DMW-FL580L: optional) provide a wider flash recording range than the flash (supplied) does. When attaching a flash, remove the hot shoe cover attached to the camera. (P203) • To change the settings for external flashes on the camera, refer to P206. • Refer to P211 about the settings for the wireless flash.
13. Others Hand grip (optional) Attaching a hand grip (DMW-HGR1: optional) will improve your grip on the camera. • For details, refer to the operating instructions of the hand grip. AC adaptor (optional)/DC coupler (optional) By connecting the AC adaptor (optional), and then plugging them into an electrical socket, you can connect this unit to a PC or printer and use without worrying about the capacity of the battery. To use the AC adaptor, a DC coupler (optional) is required.
13. Others Monitor Display/Viewfinder Display • The following images are examples of when the display screen is set to [ ] (monitor style) in the monitor. In recording 4:3 L AFS Fn3 ラュン Fn4 SS Fn6 AEL 3.
13.
13. Others In recording On-monitor recording information F 3.5 ISO AUTO AFS AWB 0 3 1/60 Single (P168) 0 0 4:3 L Burst (P169) Wi-Fi Fn 98 Auto Bracket (P172) Self-timer (P175) AFS AFF AFC MF 1 š C1 1 Recording Mode (P42) EXPS F3.
13. Others In playback Connected to Wi-Fi 4:3 1 L 1/98 SLF 67 '$< PRQWK GD\V F3.
13. Others In playback Detailed information display 60 F3.5 0 WB ISO AWB 200 AFS P STD. '(& 4:3 s RGB L 100-0001 1 2 Recorded date and time/World Time (P66) Recording information Intelligent Dynamic Range Control¢3 (P133) 3 4:3 HDR¢4 (P134)/iHDR¢4 (P80) Intelligent Resolution (P133) ¢4 Shading Compensation Picture size/Aspect Ratio (P131) L Quality (P132) A› Colour space¢4 (P136) (P135) 100-0001 Folder/File number¢3 (P316) Histogram display F3.
13. Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [This picture is protected] • Delete the picture after cancelling the protect setting. (P254) [Some pictures cannot be deleted]/[This picture cannot be deleted] • This feature can only be used with pictures that comply with the DCF standard. Perform formatting (P29) on this unit after saving necessary data on a PC, etc.
13. Others [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with this unit. (P29) [Insert SD card again]/[Try another card] • An error has occurred accessing the card. Insert the card again. • Insert a different card. [Read Error/Write Error Please check the card] • It has failed to read or write data. Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again. • The card may be broken.
13. Others [Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV] • Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P70) • This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P315, 318) [Editing operation cannot proceed as information processing is ongoing.
13. Others [Upload to the Cloud Folder is available after Cloud Sync settings have been set up on downloadable devices such as PCs or smartphones.] • Devices that download images from a cloud folder are not registered. • Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” or on a smartphone with “Image App”. Refer to P287 for details on [Cloud Sync. Service]. [Connection failed] • Check following regarding the smartphones you intend to connect.
13. Others Menu list [Rec] P335 [Setup] P341 [Motion Picture] P338 [Custom] P339 [Playback] P343 • [Photo Style], [Filter Settings], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution] and [Digital Zoom] are common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu. [Rec] [Photo Style] You can select effects to match the type of image you wish to record.
13. Others [iHDR] There is, for example, strong contrast between the background and the subject, multiple still pictures are recorded with differing exposures and combined to create a single still picture rich in gradation. P80 [HDR] You can combine 3 pictures with different levels of exposure into a single picture with rich gradation. P134 [Multi Exp.] Gives an effect like multi exposure.
13. Others [Digital Zoom] Increases the Tele effect. The higher the level of magnification, the greater the degradation in image quality. P200 [Color Space] Set this when you want to correct the colour reproduction of the recorded pictures on a PC, printer etc. P136 [Stabilizer] When camera shake is sensed during recording, the camera corrects it automatically. P195 [Face Recog.] Sets the focus and exposure automatically prioritising registered faces.
13. Others [Motion Picture] [Photo Style] You can select effects to match the type of image you wish to record. You can adjust the colour and image quality of the effects. P122 [Filter Settings] Changes the settings related to image effects (filters). P124 [Snap Movie] Lets you specify the recording time in advance and records motion pictures just like you take snapshots. P221 [Rec Format] Sets the file format for the motion pictures you record.
13. Others [Custom] [Cust.Set Mem.] Registers the current camera settings as custom set. P120 [Silent Mode] Disables operational sounds and output of light at once. P186 [AF/AE Lock] Sets the fixed content for focusing and exposure when the AF/AE lock is on. P159 [Half Press Release] The shutter will immediately fire when the shutter button is pressed halfway. P150 [Quick AF] Speeds up the focusing that takes place when you press the shutter button.
13. Others [Highlight] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white. P50 [Zebra Pattern] Indicates parts that may be whited out through overexposure in a zebra pattern. P193 [Monochrome Live View] You can display the recording screen in black and white. P194 [Constant Preview] You can check the effects of the chosen aperture and shutter speed on the recording screen in Manual Exposure Mode. P92 [Expo.
13. Others [Setup] [Clock Set] Setting Date/Time. P36 [World Time] Sets the times for the region where you live and your holiday destination. P66 [Travel Date] Departure date and return date of the trip as well as the name of the travel destination can be set. P67 [Wi-Fi] Configure the each setting for Wi-Fi functions. P303 [Beep] This allows you to set the volume for electronic sound and the electronic shutter sound.
13. Others [Self Timer Auto Off] Sets whether or not to cancel the self-timer when this unit is turned off. P72 [No.Reset] Returns the image file number to 0001. P72 [Reset] The recording or setup/custom settings are reset to the default. P72 [Reset Wi-Fi Settings] Reset all settings in the [Wi-Fi] menu to factory default settings. (Excluding [LUMIX CLUB]) P73 [Pixel Refresh] It will perform optimisation of imaging device and image processing.
13. Others [Playback] [2D/3D Settings] Switches the playback method for 3D images. [Slide Show] Selects the type etc. of the images and plays back in order. P235 [Playback Mode] Selects the type etc. of the images and plays back only particular images. P237 [Location Logging] You can write location information (longitude/latitude) on images sent from the smartphone. P238 [Clear Retouch] You can erase unnecessary parts recorded on the pictures taken.
13. Others Troubleshooting First, try out the following procedures (P344 to P357). If the problem is not resolved, it may be improved by selecting [Reset] (P72) on the [Setup] menu. Battery and power source The camera cannot be operated even when it is turned on. The camera turns off immediately after it is turned on. • The battery is exhausted. > Charge the battery. • If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [Economy] etc.
13. Others Taking pictures is not possible. The shutter will not operate immediately when the shutter button is pressed. • Is the subject focused? > Is [Focus/Release Priority] in the [Custom] menu set to [FOCUS]? (P152) You cannot take a picture until the subject is brought into focus. The recorded picture is whitish. • Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
13. Others The recorded picture looks rough. Noise appears on the picture. • Try the following: > Take pictures in bright places. > Decrease the ISO sensitivity. (P162) > Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the items other than [Noise Reduction]. (P123) > Set the [Long Shtr NR] to [ON].
13. Others Operation sound is small. • Is your finger covering up the speaker? (P14) Recording by Panorama Shot Mode is ended before finishing. • If the camera is moved too slowly, the camera has assumed that camera motion was stopped and will end the still picture recording. • If there is a great deal of shaking towards the recording direction while moving the camera, recording will end. Motion pictures Recording motion pictures is not possible.
13. Others In motion pictures, abnormal clicking and buzzing sounds are recorded. The recorded sound is very quiet. • With recording in a quiet environment, depending on the lenses used, the sound of aperture and focus actions may be recorded in motion pictures. Focus operation can be set to [OFF] in [Continuous AF] (P219). • Use of [Silent Operation] is recommended if you are concerned about operational sounds.
13. Others Flash The flash is not activated. • Is the flash (supplied) turned off? > Turn on the flash. (P203) • When the electronic shutter is used, the flash is not activated. (P166) > Set [Shutter Type] to [AUTO] or [EFC]. • When [Silent Mode] is set to [ON], the flash is not activated. (P186) > Set [Silent Mode] to [OFF]. The flash is activated 2 times. • (Except for when [Firing Mode] in [Flash] is set to [MANUAL]) The flash is activated 2 times.
13. Others Black, white, red, blue and green dots appear on the Monitor/Viewfinder. • This is not a malfunction. These pixels do not affect the recorded pictures. Noise appears on the monitor. • In dark places, noise may appear to maintain the brightness of the monitor. The monitor displays distorted images. • The monitor may display distorted images in high ambient temperatures, but this does not affect images to be recorded.
13. Others The folder number and the file number are displayed as [—] and the screen turns black. • Is this a non-standard picture, a picture which has been edited using a PC or a picture which was taken by another make of digital camera? • Did you remove the battery immediately after picture-taking or did you take the picture using a battery with a low remaining charge? > To delete such pictures, make a backup of the data and format the card (P29). Playback sound or operation sound is too low.
13. Others Wi-Fi function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. ∫ General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? > Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the device.
13. Others This unit is not displayed in the Wi-Fi setting screen of the smartphone. • From the Wi-Fi setting menu on the smartphone, turn off and then on the Wi-Fi function. I have forgotten the login ID or password for the “LUMIX CLUB”. • Check the information in the login screen of “LUMIX CLUB”. http://lumixclub.panasonic.net/eng/c/ I do not have a wireless access point at my home, but I would like to perform service user registration of the “LUMIX CLUB”.
13. Others Images cannot be transmitted to the web service. • Confirm that the login information (login ID/user name/email address/password) is correct. • Web service server or the network may be busy. > Try again after a while. > Check the site of the web service you are sending the image to. It takes time to transmit an image to the web service. • Is the size of the image too large? > Reduce the image size at [Size] (P302), and then send.
13. Others I have forgotten the password for the Wi-Fi. • Execute the [Reset Wi-Fi Settings] in the [Setup] menu. (P73) However, all the information you have set on the [Wi-Fi Setup] menu will be reset. (excluding [LUMIX CLUB]) TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? (P308) > Set the TV input to external input mode. The picture is not displayed fully on the TV.
13. Others The card is not recognised by the PC. • Disconnect the USB connection cable. Connect it again while the card is inserted in the camera. • If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal. The card is not recognised by the PC. (SDXC memory card is used.) • Check if your PC is compatible with SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.
13. Others The camera makes a noise when this unit is turned on. • This is the noise of the Dust Reduction Function working (P359); it is not a malfunction. There is a sound from lens unit. • It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is not a malfunction. • The sound, which is caused by the automatic adjustment of the aperture, is heard when the brightness has changed due to, for example, zooming or the movement of the camera.
13. Others Cautions for Use Optimal use of the camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
13. Others Cleaning Before cleaning the camera, remove the battery or the DC coupler (optional), or disconnect the power plug from the outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc.
13. Others About the Monitor/Viewfinder • Do not press the monitor with excessive force. Uneven colours may appear on the monitor and it may malfunction. • If the camera is cold when you turn it on, the picture on the Monitor/Viewfinder will be slightly darker than usual at first. However, the picture will return to normal brightness when the internal temperature of the camera increases. Extremely high precision technology is employed to produce the Monitor/ Viewfinder screen.
13. Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. Always remove the battery after use. • Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips, etc.).
13. Others About 3D ∫ About 3D recording With the 3D interchangeable lens attached, do not record a subject at less than the minimum focus distance. • The 3D effects may be more pronounced, and therefore cause tiredness or discomfort. • When the 3D interchangeable lens (H-FT012: optional) is used, the minimum focus distance is 0.6 m (2.0 feet). When recording with the 3D interchangeable lens attached, be careful not to shake the unit.
13. Others Card Do not leave the card where the temperature is high, where electromagnetic waves or static electricity are easily generated or exposed to direct sunlight. Do not bend or drop the card. • The card may be damaged or the recorded content may be damaged or deleted. • Put the card in the card case or the storage bag after use and when storing or carrying the card.
13. Others When requesting a repair, transferring to another party, or disposing. • After making a copy of personal information, always delete information such as personal information and wireless LAN connection settings that you have saved within the camera with [Reset Wi-Fi Settings]/[Delete account] (P73, 293). • Reset the settings to protect the personal information. (P72) • Remove the memory card from the camera when requesting a repair.
13. Others About the picture data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. About tripods or unipods • When you use a tripod, make sure the tripod is stable when this unit is attached to it. • You may not be able to remove the card or the battery when using a tripod or unipod.
13. Others • G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard. • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. • Four Thirds™ and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries.
13. Others • QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. • Android and Google Play are trademarks or registered trademarks of Google Inc. • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi AllianceR. • The Wi-Fi Protected Setup™ Identifier mark is a certification mark of Wi-Fi AllianceR. • “Wi-FiR” and “Wi-Fi DirectR” are registered trademarks of Wi-Fi AllianceR.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.