Operating Instruction

Table Of Contents
183
7. Functions Customised for Various Subjects and Purposes
Automatic recording may not take place at set intervals because recording takes time under
certain recording conditions, such as when the flash is used for recording.
When a picture quality different from the aspect ratio of the original pictures is selected, black
strips will be displayed on the top and bottom or the left and right of the motion picture.
We recommend that you use a sufficiently charged battery or an AC adaptor (optional) and a
DC coupler (optional).
If power supply is lost by unplugging the AC adaptor or due to a blackout while creating a
motion picture with the AC adaptor, the motion picture you are creating will not be recorded.
A motion picture that exceeds the recording time of 29 minutes and 59 seconds and a motion
picture that exceeds the file size of 4 GB cannot be created.
A motion picture shorter than 1 second is displayed as “0s” on the motion picture recording time
(P227)
.
If only one picture was taken, the picture is not saved as a group picture.
A picture cannot be selected from [Additional] when it is the only one that was taken.
Not available in these cases:
This function is not available in the following cases:
When using [Multi Exp.]
When using [Time Lapse Shot]
[Auto Shooting] in [Stop Motion Animation] is not available for the following functions:
[Handheld Night Shot] (Scene Guide Mode)