Operating Instruction

Table Of Contents
81
3. Recording Modes
Recording Mode:
You can easily set the blurriness of the background while checking the screen.
1 Press the rear dial to display the setting screen.
Each time the rear dial is pressed in Intelligent Auto Plus Mode, the camera switches
between brightness setting operation (P82), Defocus Control operation, and normal
operation.
Each time the rear dial is pressed in Intelligent Auto Mode, the camera switches between
Defocus Control operation and normal operation.
2 Set the blurriness by rotating the rear dial.
When operating the touch screen
1 Touch [ ].
2 Touch [ ] to display the setting screen.
3 Drag the exposure meter to set the blurriness.
Press [MENU/SET] to end the Defocus Control operation.
Pressing [ ] on the blurriness setting screen will cancel the setting.
In Intelligent Auto Mode ( or ), Auto Focus Mode is set to [Ø].
The position of the AF area can be set by touching the screen. (Its size cannot be changed)
Depending on the lens used, you may hear a sound from the lens when the Defocus Control is
used, but this is due to operation of the aperture of the lens and it is not a malfunction.
Depending on the lens used, operational sound of the Defocus Control may be recorded during
the recording of a motion picture when the function is used.
Not available in these cases:
Depending on the lens used, Defocus Control function may not operate.
Refer to the website for compatible lenses.
Taking a picture with a blurred background (Defocus Control)
Strong defocus Weak defocus
SSSSSS
FF
250500
4.0 5.6 8.0
3060125
AE