Operating instructions

Preparation
24
VQT0W95
∫ Temporarily storing the lens hood
1 Turn the lens hood in the
direction of the arrow to detach it.
2 Reverse the lens hood and then
attach it in the same way as
shown previously.
• Attach the lens cap.
• When temporarily storing the lens hood,
check that it is firmly attached and that it
does not appear in the picture.
• Hold the short sides of the lens hood
when attaching or detaching it.
• When taking pictures with the flash with
the lens hood attached, the lower portion
of the screen may turn dark (vignetting
effect) and the control of the flash may be
disabled because the photo flash may be
obscured by the lens hood. We
recommend detaching the lens hood.
• When using the AF assist lamp in the
dark, detach the lens hood.
• For details on how to attach the MC
protector and the PL filter, refer to P107.
• Consult the dealer or your nearest
servicentre if you lose the supplied
accessories. (You can purchase the
accessories separately.)
Attaching the Strap
1 Pass the strap through the hole at
the strap eyelet.
A: Eyepiece cap
• Attach the strap so that the side with
the eyepiece cap attached to it is near
the Viewfinder.
2 Pass the strap through the
stopper and fasten the strap.
B: Pull the strap 2 cm or more.
• Attach the strap to the other side of the
camera also so that is does not get
twisted.
• Check that the strap is firmly attached to
the camera.
• Attach the strap so that the “L
UMIX” LOGO
is on the outside.
A
B