Operating instructions

Advanced-Shooting
- 61 -
x
[HI-SPEED BURST]
This is a convenient mode for shooting rapid movement or a decisive moment.
Picture size
1 Press
e
/
r
to select the picture size and then press [MENU/
SET] to set.
3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.
2 Take pictures.
Still pictures are taken continuously while the shutter button is
pressed fully.
Maximum Burst speed approx. 4.5 pictures/second
Number of recordable
pictures
approx. 10 (built-in memory)/approx. 10 to 100
(card)
The maximum is 100.
The burst speed changes according to the recording conditions.
The number of burst recording pictures are limited by the picture-taking conditions and the
type and/or status of the card used.
The number of burst recording pictures increase immediately after formatting.
Note
Flash is xed to Forced ash OFF [
o
].
[QUALITY] is automatically xed to [
8
].
You can take pictures suitable for 4"×6"/10×15 cm printing.
The shutter speed becomes 1/8th of a second to 1/2000th of a second.
The focus range becomes the same as in Macro Mode. [5 cm (Wide)/50 cm (Tele) to
7
]
The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are xed to the
settings for the rst picture.
The ISO sensitivity automatically switches to between [ISO500] and [ISO800]. However, the
ISO sensitivity is increased to make the shutter speed become high-speed.
The batteries will run out faster in High Speed Burst Mode than in Normal Mode.