Operating Instructions, EB (UK Model)

ManualsBrandsPanasonic ManualsAV ProductsDMCLZ8

88

VQT1L98

Advanced-Viewing

Delete the title (for [SINGLE] only)

In step 2 when [SINGLE] is selected,

delete all the texts, select [EXIT], and

press [MENU/SET].

Press [ ] twice to close the menu.

Registered text can be displayed on the

screen of this unit. (Displayed on slide if

too many texts are input.)

The name setting of [BABY] or [PET]

mode can be registered by using the

same operation as “Single setting”.

However, the name setting and [TITLE

EDIT] cannot be registered at the same

time.

You can use the software

[PHOTOfunSTUDIO-viewer-] on the

CD-ROM (supplied) to print the text

(comments). For details, refer to the

operating instructions (PDF ﬁ le) of the

software.

Example of text entry

In case of entering [LUMIX]:

1 Move e/r/w/q to move the cursor to

[L] and then press [MENU/SET].

2 Move e/r/w/q to move the cursor to

[U] and then press [MENU/SET].

3 Move e/r/w/q to move the cursor to

[M] and then press [MENU/SET].

4 Move e/r/w/q to move the cursor to

[I] and then press [MENU/SET].

5 Move e/r/w/q to move the cursor to

[X] and then press [MENU/SET].

■

1.

2.

•

•

•

[ TEXT STAMP]

Stamping the text on your

pictures

You can stamp the set text, date and time

of recording, the age and the travel date on

the recorded pictures.

This function is suitable when you print

4˝ × 6˝/10 × 15 cm images. (Images are

resized when you add the text to the

pictures taken with a resolution of more

than [

].)

Select [

TEXT STAMP] from

playback menu ( P86 ).

Common operation

Press e/r to select [SINGLE] or

[MULTI] and press [MENU/SET].

MENU

SET

CAL

PLAYBACK

CALENDAR

TITLE EDIT

TEXT STAMP

RESIZE

TRIMMING

SELECT

SET

SINGLE

MULTI

You cannot add the texts or the date to

the following images.

Images taken when the clock is not set

Images that already have texts on them

Motion pictures

Images recorded with other equipment

Single setting

After the common operation

Press w / q to choose a picture,

then press [MENU/SET].

MENU

SET

100-0001

100-0001

1/19

1/19

10

M

TEXTTEXT

STAMP STAMP

CANCELCANCEL

AA

SELECT SELECT SETSET

■

•

–

–

–

–

■

1

Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )

VQT1L98_DMC-LZ10_EB.indd 88VQT1L98_DMC-LZ10_EB.indd 88 2008/01/21 9:53:072008/01/21 9:53:07