Operating Instructions

- 75 -
Advanced-Shooting
[BURST]
Shooting in quick succession
When you press and hold the shutter
button several pictures are taken in
succession.
Burst mode
Burst speed 2.5 fps

Approx. 2 fps
Number of
recordable
pictures
G
Max. 3
(DMC-LZ10)/
Max. 4
(DMC-LZ8)
Depending on
the remaining
capacity of
the built-in
memory / card.
H
Max. 5
(DMC-LZ10)/
Max. 7
(DMC-LZ8)
 The burst speed is constant regardless
of the transfer speed of the card.
The focus is xed when the rst picture
is taken. The exposure and the white
balance vary depending on the burst
mode setting. (When burst mode is set to
[ ], they are xed to the values set for
the rst picture and when the burst speed
is set to [ ], they are adjusted each
time you take a picture.)
When the self-timer is used, the number
of recordable pictures in burst mode is
xed to 3.
In burst mode, the ash setting is xed to
Forced FLASH OFF [ ].
Burst mode is not cancelled even when
the camera is turned off.
When the burst mode setting is set to
[ ], the burst speed becomes slower
halfway. (The exact timing of this depends
on the type of card and each settings.)
The burst speed may become slower if the
ISO sensitivity is set to high or in dark places.
•
•
•
•
•
•
If you are following a moving subject while
taking pictures in a place where there is
a large difference between the light and
shade, the exposure may not become
optimal.
If you take pictures in burst mode with
the built-in memory, it will take time to
write the picture data.
In burst mode, auto review is activated
even if the setting is off.
Burst mode cannot be set in [STARRY
SKY] and [HI-SPEED BURST] modes.
Auto bracket mode setting is cancelled
when [BURST] is activated.
T
[COLOR EFFECT]
Setting colour effects for the
recorded pictures
You can use following types of colour
effects depending on the image of the
picture.
Item Setting
OFF Standard setting
B/W Black and white
SEPIA Sepia coloured pictures
COOL More blue
WARM More red
Noise may become noticeable when
taking pictures in dark places. If it bothers
you, we recommend setting [COLOR
EFFECT] to [OFF].
When in intelligent auto mode [ ],
[COOL] and [WARM] cannot be set.
When in intelligent auto mode [ ], it is
set independently from other modes.
•
•
•
•
•
•
•
•
Press [ ] to display the [REC] mode menu and select the item to set. (P19)