Operating Instructions

Application (Record)
Burst function
VQT4T12
- 107 -
■
Note on the picture size setting
[Aspect Ratio]
5M, 3M, 0.3M 2.5M, 0.3M 3M
4.5M, 2.5M, 0.3M 3M, 0.3M 2.5M
3.5M, 2M, 0.2M 3.5M, 0.2M 2M
3.5M, 2.5M, 0.2M 2M, 0.2M 2.5M
●
Pictures taken with the or setting are recorded together as a group (picture
group). (→130)
●
Depending on changes in the brightness of the subject, the second and subsequent
pictures may be recorded brighter or darker when using the burst function at the ,
, or setting.
●
Burst speed may be reduced if shutter speed is reduced in darker locations.
●
The pictures taken using the burst function at the or setting may be distorted if
the subjects were moving or the camera was moved.
●
[Auto Bracket] is released.
●
The flash is set to [Forced Flash Off]. (Excluding [Flash Burst])
●
Settings will be stored even if the camera is turned off.
●
The burst function cannot be used in the following cases:
• Scene Modes ([Handheld Night Shot], [HDR], [Starry Sky], [High Speed Video],
[3D Photo Mode])
• [Creative Control] Mode ([Toy Effect], [Miniature Effect], [Soft Focus], [Star Filter])
●
When the scene mode is set to [Night Portrait], [Night Scenery] or [High Sens.], or
cannot be selected.
●
When [Self Timer] is set, 3 pictures are taken. (When [Flash Burst] is set,
5 pictures are taken.)
●
It may take a while to store still pictures that were taken using the burst function. If
you continue to record while storing, the number of burst pictures that can be taken
will be reduced. A high-speed card is recommended when recording using the burst
function.
●
You cannot use zoom during burst recording.