Operating Instructions

Wi-Fi
Connecting via a wireless access point
VQT4T12
- 207 -
■
When connecting with [Manual Input]
If the wireless access point does not appear, you can directly enter the SSID.
In step (→206), use cursor button to select [Manual Input], and
then press [MENU/SET]
Enter the SSID of the wireless access point you are
connecting to, then select [Set]
• For details on how to enter characters, refer to “Entering Text” (→114).
Use cursor button to select the network authentication type,
and press [MENU/SET]
• For information on network authentication, see the manual of the wireless access
point.
Use cursor button to select the encryption type, and press
[MENU/SET]
• The type of settings that can be changed may vary depending on the details of
network authentication settings.
Network authentication type Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP]
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set]
●
Check the wireless access points instruction manual and settings when a saving
wireless access point.
●
If no connection can be established, the wireless access point’s radio waves may
be too weak. Refer to “Message displays” (→277) and “Q&A Troubleshooting” (→281) for
details.
●
Transmission speed may decrease, or may not be usable depending on the
environment it is used in.