Operating Instructions

Wi-Fi
Send Images Stored in the Camera
VQT4T12
- 227 -
When sending images to PC
Preparations:
• Turn the computer on.
• Prepare folders for receiving images on the PC before sending a picture to the PC.
(→217)
• If the standard settings are changed for the workgroup on the connected PC, you must
change settings in [PC Connection] on this unit. (→251)
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press
[MENU/SET]
• You can also select it by touch operations.
Use cursor button to select [Send Images Stored in the
Camera], and then press [MENU/SET]
Use cursor button to select [PC], and then press [MENU/SET]
Use cursor button to select connection method, and then
press [MENU/SET]
[Via Network] When you want to connect to your PC via a wireless access point.
(→205)
[Direct] When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (→208)
Use cursor button to select a PC you want to connect, and
then press [MENU/SET]
Use cursor button to select the folder you want to send to, and
then press [MENU/SET]
• When the connection is complete, the screen is displayed. To change the send
setting, press [DISP.] button. (→214)
(Continued on the next page)