Operating Instructions

Connecting with other devices
Keeping the still pictures and motion pictures in
the recorder
VQT4T12- 259 -
The methods for copying still and motion pictures recorded with this camera to other
devices vary according to the file format (JPEG, MPO, AVCHD, MP4). Follow the correct
method for your device.
Copy by inserting the SD card into the recorder
You can copy pictures using Panasonic equipment (such as Blu-ray disc
recorders) with support for each file format.
Check the latest information about equipment that is compatible with this camera
on the following website.
• Note that the equipment described may not be available in certain countries
and regions.
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)
• See the instruction manual for the recorder for details for
copying and playing back.
32
3232
Dubbing playback pictures via AV cables (optional)
Videos that are played on this camera can be dubbed on media such as a disc, hard disk
or videotape using a device such as a video recorder. This method is useful as it allows
dubbing to be performed even with devices that are not compatible with high definition
images. Picture quality will be reduced from high definition to standard definition. Audio
will be monaural.
Connect camera to recorder
To recorder’s input socket
AV cable
(optional)
Start playback on camera
Start recording on recorder
• To stop recording (dubbing), stop the recording
on your recorder first before stopping the
playback on the camera.
●
Always use a genuine Panasonic AV cable (optional).
●
When using a TV with a 4:3 aspect ratio, always change the camera’s [TV Aspect]
setting (→64) to [4:3] before dubbing. Motion pictures copied in the [16:9] setting will
appear vertically stretched when viewed on a 4:3 TV screen.
●
For details on dubbing and playback methods, refer to your recorder’s operating
instructions.