Operating Instructions

Table Of Contents

Basics

Using the [Setup] menu

VQT4T12

- 64 -

• For the setting procedures of the menu. (→54)

[USB Mode]

Select communication method for when connecting camera to a computer or printer with

USB connection cable (supplied).

Update the GPS assist data.

DMC-TZ40

DMC-TZ41

■

Settings

[Select on connection]:

Select communication method each time you connect to a computer or PictBridge-

compatible printer.

[PictBridge(PTP)]:

Select when connecting to a PictBridge-compatible printer.

[PC]:

Select when connecting to a computer.

DMC-TZ40

DMC-TZ41

[GPS assist data]:

Select when using this unit to update GPS assist data. (→169)

[Output]

Change the settings to be used when the camera is connected to a TV or other device.

■

Settings

[Video Out]

[NTSC] / [PAL]

[TV Aspect] (This setting performs when an AV cable (optional) is connected.)

[VIERA Link]

Enable automatic linking with other VIERA Link-compatible devices, and operability with a

VIERA remote control when connecting via an HDMI micro cable (optional) (→255).

■

Settings

[ON]: Operations may be performed via the remote control of the VIERA Link-

compatible device. (Not all operations will be available.)

Operability of the camera’s own buttons will be limited.

[OFF]: Operations must be performed via the camera’s own buttons.