Operating Instructions

24
Basic operations Marking on pictures
J Switching marks with [Ctrl] key + [M] key
If you press the [M] key while holding down the [Ctrl] key
with the picture selected, marks on the selected pictures
are alternatively switched.
When the marks on the selected multiple pictures are
different, all of the selected pictures follow the condition of
the mark on the picture selected last.
J Setting/Canceling marks in Focus Mode
In Focus Mode, click the check box on any thumbnail
picture to set/cancel the mark.
J Setting/Canceling marks in Full Screen Mode
When in the Full Screen Mode, click the check box at the
top right corner to set or cancel the mark.
1 Initial state.
Only the picture in
the center is
marked.
2 Select the picture in the center.
3 Select the picture on the left.
• How to select multiple pictures: 22
4 Press [Ctrl] and [M] key.
The picture on the
left is marked. Along
with it, the picture in
the center is also
marked.
5 Press [Ctrl] and [M] key again.
Marks on both
pictures are
canceled.
6 Press [Ctrl] and [M] key once more.
Both pictures are
marked again.