Operating Instructions

29
Acquiring and displaying pictures Acquiring pictures to PC
Acquiring pictures to PC
 Set the memory card or DVD of acquisition source.
1 Click [ ].
2 Set the acquisition method.
1 Select the drive of acquisition source.
2 Put a mark on the picture to be acquired.
• Right-click the thumbnail of any picture and select
[Properties], and you can see the picture information.
3 Check the acquisition destination folder.
• When you change the folder to save the acquired
pictures, click [Change] to select the desired folder.
4 Select the distribution condition.
Pictures are divided and saved in subfolder depending
on the selected condition.
A Pictures will be saved in the subfolder of the
picture’s acquisition date (today’s date).
B Pictures will be divided and saved depending on the
picture’s recording month.
C Pictures will be divided and saved depending on the
picture’s recording date.
D Pictures will be saved in the subfolder of entered
name.
3 Click [OK].
Picture will be acquired according to the setting.
 If the message [Insert a memory card containing pictures taken
by a digital still camera.] appears, check the following:
- Whether the device at acquisition source is firmly connected.
-Whether the power supply of the device is switched ON.
-When acquiring data from digital camera, check whether
the setting is compliant with the PC. (For details, refer to
the operating instructions for the digital camera.)
1
2
3
4
A
B
C
D