Operating Instructions

37
Acquiring and displaying pictures Playing back slide shows
J Detailed settings for slide shows
Click [ ] during the slide show to open the [Slide show
settings] window.
 These settings can also be changed from the menu. Display
[Settings] window by selecting [Tools]  [Settings], click [Slide
show] tab and perform settings.
1 Effects settings
A Selected picture effects are used while switching pictures.
B The pictures are switched over at regular intervals without
using picture effects. Set the number of seconds by
clicking [ ].
2 Music settings
Background music can be added to a slide show by
putting a check mark on [ ].
C Music matched with the settings of switching effects is
selected automatically.
D Click [Browse] to select a music file.
• Files in M4A, MP3, WMA or WAV format can be used.
However, some files may not be played back.
3 Settings for repeat operations
If a check mark is put on [ ], the slide show will be
replayed from start after picture reaches the end.
4 Setting picture quality
Selects picture quality of the slide show to be displayed.
• Recommended system requirements are as follows:
• Please note that depending on the system environment
and usage status it may not play back normally even
with the recommended systems. For example:
-When this software is being used while other software is
operating
-When using a PC equipped with a video card that shares
the video memory and main memory
-When the free space on the system drive or temporary file
storage drive is extremely low
5 [OK] button
Window will be closed after saving the changes.
6 [Cancel] button
Window will be closed after canceling the changes.
Settings for slide shows
A
B
C
D
1
2
3
5
6
4
[Prioritize picture quality] Core™2 Duo 2.4 GHz or higher
[Standard] Pentium
®
4 1.6 GHz or higher
[Prioritize speed] Pentium
®
III 800 MHz or higher