Operating Instructions

Retouch Correcting pictures or add effects

J To execute retouching using the menu

Instead of the editing panel, you can correct or add effects

to pictures from [Effect] on the menu bar.

To set [Brightness & Contrast], [Hue & Saturation] and [Sharpness],

the respective windows for detailed settings will be opened.

The setting methods are the same as the editing panel.

Whenever settings are changed, the results will be reflected in

the picture window and in the set values on the editing panel.

To fix the contents and close the detailed settings window,

click [OK].

Click [Cancel] to cancel the setting and close the detailed

settings window. Pictures in the picture window and the

settings on the editing panel will also return to the initial

states before the detailed setting window was opened.

J To extract a part of a picture

It is also possible to extract only the necessary part of a picture.

1) Select [Effect]  [Crop Picture] on the menu.

The [Crop Picture] window will be displayed.

2) Designate the necessary part by dragging the

anchor point (1) and click [OK].

The designated part will be extracted.

• You can also set the size of the part to be extracted by

entering a numerical value in 2.

 It may not extract as designated depending on the picture.

 The printed quality of the extracted portion may be of a lesser

quality than the original. This occurs more often when the

extracted portion is printed at a large size. This is normal and

not a malfunction.