Operating Instructions

82
Outputting Attaching pictures to e-mail
J If you cannot attach a file to an e-mail
The e-mail software must be set up. Exit from the
PHOTOfunSTUDIO, and set up as follows:
1) Activate the mail software to be set up.
• If you activate it for the first time, set the mail
addresses, etc.
2) If the message, [Would you like to make it your
default client?] appears, select [Yes].
• If the message does not appear, refer to the operating
instructions of the e-mail software to set the e-mail
software as the default client.
Example: Select [start]  [Control Panel] and open
[Internet Options]. Then click [Programs] tab, select
the software you use on [E-mail] and click [OK].
• The contents of the message vary by the e-mail
software you are using.
• Also read the operating instructions for the e-mail
software.